Formaldehyde Formalin 37% 1 Liter User Manual

1. Product Overview

This manual provides essential information for the safe and effective handling, storage, and disposal of Carolina Chemical Formaldehyde Formalin 37% solution.

Image 1.1: A 1-liter bottle of Carolina Chemical Formaldehyde Formalin 37%. The bottle is white with a red cap and features a pink and white label displaying the product name, concentration, and hazard pictograms.

Formaldehyde 37 wt. % in water, contains 7.0-8.0% Methanol as stabilizer. This product is supplied in a 1 Liter volume. Its CAS Number is 50-00-0, Molecular Formula is HCHO, and Molecular Weight is 30.03.

2. Safety Information and Hazard Warnings

WARNING: This product is a hazardous chemical. Read and understand the Safety Data Sheet (SDS) before use. Always use appropriate personal protective equipment (PPE).

2.1 Hazard Pictograms (as seen on label):

• Skull and Crossbones: Toxic/Fatal. Indicates acute toxicity.
• Health Hazard: Carcinogen, Mutagenicity, Reproductive Toxicity, Respiratory Sensitizer, Target Organ Toxicity, Aspiration Toxicity.
• Corrosion: Skin Corrosion/Burns, Eye Damage, Corrosive to Metals.
• Flame: Flammables, Pyrophorics, Self-Heating, Emits Flammable Gas, Self-Reactives, Organic Peroxides.

2.2 Personal Protective Equipment (PPE):

• Eye Protection: Wear chemical splash goggles and/or a full face shield.
• Hand Protection: Wear appropriate chemical-resistant gloves (e.g., butyl rubber, nitrile).
• Skin and Body Protection: Wear chemical-resistant clothing and footwear.
• Respiratory Protection: Use a respirator with an organic vapor cartridge if ventilation is inadequate or exposure limits are exceeded.

2.3 First Aid Measures:

• Inhalation: Move to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention immediately.
• Skin Contact: Immediately flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Get medical attention immediately. Wash clothing before reuse.
• Eye Contact: Immediately flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical attention immediately.
• Ingestion: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Get medical attention immediately.

3. Handling and Storage

3.1 Handling Precautions:

• Use only in a well-ventilated area or under a fume hood.
• Avoid contact with skin, eyes, and clothing.
• Do not ingest or inhale.
• Keep away from heat, sparks, and open flame.
• Ground all equipment when transferring material.
• Wash thoroughly after handling.

3.2 Storage Conditions:

• Store in a cool, dry, well-ventilated area away from incompatible substances.
• Keep container tightly closed when not in use.
• Store away from direct sunlight and heat sources.
• Ensure proper labeling and secure storage to prevent unauthorized access.
• Recommended storage temperature: 15-30°C (59-86°F).

4. Disposal Considerations

Dispose of contents and container in accordance with local, regional, national, and international regulations. Formaldehyde is a regulated hazardous waste. Do not dispose of down drains or into the environment.

• Consult with a licensed hazardous waste disposal company.
• Ensure all waste is properly characterized and packaged for transport.
• Empty containers may retain product residue and should be handled with the same precautions as the full container.

5. Specifications

6. Emergency Procedures

6.1 Spill Response:

1. Evacuate personnel to safe areas.
2. Ensure adequate ventilation.
3. Wear appropriate personal protective equipment (PPE).
4. Contain spill with inert absorbent material (e.g., sand, vermiculite). Do not use combustible materials.
5. Collect spilled material and place in a suitable, closed container for disposal.
6. Wash the spill area with water and detergent.
7. Report spills as required by local regulations.

6.2 Fire Fighting Measures:

• Suitable Extinguishing Media: Water spray, dry chemical, carbon dioxide (CO2), foam.
• Unsuitable Extinguishing Media: Do not use a solid water stream as it may spread the fire.
• Specific Hazards Arising from the Chemical: Vapors may form explosive mixtures with air. Combustion products may include carbon monoxide and carbon dioxide.
• Protective Equipment and Precautions for Firefighters: Wear self-contained breathing apparatus (SCBA) and full protective gear.

7. Manufacturer Information and Support

For further information, technical support, or in case of emergency, please contact Carolina Chemical.

• Brand: Carolina Chemical
• Manufacturer: Carolina Chemical
• Website: www.carolinachemical.com (as indicated on product label)
• ASIN: B09BTJSZ17

Always refer to the latest Safety Data Sheet (SDS) provided by the manufacturer for the most current and complete safety information.