Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Shkalacar Car Keyless Entry System. This system is designed to enhance vehicle security with anti-theft features and convenient keyless entry functions. Please read this manual thoroughly before installation and use to ensure proper functionality and safety.
Package Contents
Verify that all components listed below are present in your package:
- 1 x Main Control Unit
- 1 x Shock Sensor
- 1 x Siren
- 1 x LED Light
- 2 x Remote Controls
- 1 x Set of Wiring Harness
- 1 x Instruction Manual (English)
Image: Overview of all components included in the Shkalacar Car Keyless Entry System kit, including the main control unit, siren, shock sensor, wiring harnesses, LED indicator, and two remote controls.
Components Overview
Main Control Unit
The central processing unit of the alarm system. It receives signals from the remote controls and sensors, and controls the siren, door locks, and other vehicle functions. It features multiple ports for connecting various components of the system.
Image: A close-up view of the main control unit, highlighting the various colored connectors for the wiring harness, indicating input and output ports.
Remote Controls
Two remote controls are provided for convenient arming, disarming, and other functions. Each remote typically includes buttons for lock, unlock, trunk release, and siren mute/panic. The maximum operating range is approximately 100 meters.
Image: A hand demonstrating the use of one of the remote controls, showing the button layout for various functions like lock, unlock, and siren.
Siren
The siren provides an audible alert when the alarm system is triggered, deterring potential intruders and notifying the owner of a security breach.
Shock Sensor
Detects impacts or vibrations to the vehicle, triggering the alarm if a significant shock is detected. Sensitivity may be adjustable.
Wiring Harness
Image: Various wiring harness components, including a wire with an indicator light, a wire with a button switch, and the main multi-colored harness with fuses, used for connecting the system components to the vehicle's electrical system.
A comprehensive set of color-coded wires and connectors designed to integrate the alarm system with your vehicle's electrical system. Includes connections for power, ground, door triggers, ignition, siren, and other accessories.
Installation (Setup)
Installation of this keyless entry and alarm system requires knowledge of automotive electrical systems. It is highly recommended that installation be performed by a qualified professional to ensure correct wiring and prevent damage to the vehicle or the system.
General Installation Guidelines:
- Disconnect Battery: Before beginning any wiring, disconnect the vehicle's negative battery terminal to prevent electrical shorts.
- Mount Main Control Unit: Choose a secure, hidden location inside the vehicle, away from moisture and extreme temperatures.
- Connect Wiring Harness: Refer to the provided wiring diagram for specific connections to the vehicle's power, ground, ignition, door triggers, and other relevant circuits. Ensure all connections are secure and properly insulated.
- Install Siren: Mount the siren in the engine bay, facing downwards to prevent water accumulation, and away from heat sources.
- Install Shock Sensor: Mount the shock sensor securely to a rigid part of the vehicle's chassis, typically under the dashboard or center console. Adjust sensitivity as needed after installation.
- Install LED Indicator: Mount the LED indicator in a visible location on the dashboard to show the system's status.
- Test System: Reconnect the battery and test all functions of the alarm system and keyless entry.
Image: Detailed installation circuit diagram for the Shkalacar Car Keyless Entry System, illustrating connections for the main control unit, siren, sensors, and various vehicle electrical circuits. This diagram is essential for proper wiring.
Note: The circuit diagram provides a general guide. Vehicle-specific wiring colors and locations may vary. Consult your vehicle's service manual or a professional installer for precise wiring information.
Operation
The system is operated primarily using the provided remote controls. Familiarize yourself with the button functions:
- Lock Button: Press once to arm the system and lock the vehicle doors. The siren will chirp once, and the parking lights may flash.
- Unlock Button: Press once to disarm the system and unlock the vehicle doors. The siren will chirp twice, and the parking lights may flash.
- Trunk Release Button: Press and hold to open the vehicle's trunk (if connected and supported by the vehicle).
- Siren/Panic Button: Press to activate the panic alarm. Press again to deactivate.
Programmable Functions:
The system includes several programmable functions to customize its behavior:
- Auto Armed: System automatically arms after a set period when the ignition is turned off and doors are closed.
- Close of the Auto Armed Security: Disables the auto-arming feature.
- Open Ignition Security: System arms when ignition is turned on.
- Automatic Re-arm: If the system is disarmed but no door is opened within a set time, it will re-arm automatically.
- Acoustic Arm and Disarm: Enables or disables the siren chirps for arming and disarming confirmations.
- Exclusion of False Alarms: Reduces sensitivity or ignores minor triggers to prevent false alarms.
- Anti-asalto by Transmitter: Anti-hijack feature activated via remote control.
- Delay Line Buttons by Courtesy Light: Delays door trigger input based on courtesy light activity.
- Anti-asalto by Ignition: Anti-hijack feature activated by ignition status.
- Pulse Type of Channel 3: Configures the output signal type for an auxiliary channel.
- Intermittent Horn (Connect): Configures the horn output for intermittent sounding.
- Acoustic Warning Activation of Anti-asalto: Enables audible warnings during anti-hijack activation.
- Engine Failure During the Second Phase of Anti-asalto: Engine immobilization during anti-hijack.
- Security Lock with Automatic Re-arm: Combines security lock with automatic re-arming.
- Anti-asalto Presence (Additional Transmitter): Anti-hijack feature requiring an additional transmitter.
- Output to Activate Window Roll-up Module: Provides an output signal to control an optional window roll-up module.
Note: Specific programming steps for these functions are typically detailed in the included instruction manual. Consult that document for precise configuration procedures.
Troubleshooting
If you encounter issues with your Shkalacar Car Keyless Entry System, refer to the following common troubleshooting steps:
- System Not Responding to Remote:
- Check remote control battery. Replace if necessary.
- Ensure you are within the operating range (up to 100 meters).
- Verify that the main control unit is receiving power. Check fuses.
- Alarm Triggers Falsely:
- Adjust the sensitivity of the shock sensor. Reduce sensitivity if it's triggering from minor vibrations.
- Check door, hood, and trunk pin switches for proper operation. A faulty switch can cause false triggers.
- Ensure all wiring connections are secure and free from shorts.
- Doors Do Not Lock/Unlock:
- Verify proper connection to the vehicle's central locking system.
- Check for blown fuses related to the door lock actuators.
- Ensure the main control unit is receiving the correct signals from the remote.
- Siren Not Sounding:
- Check the siren's power and ground connections.
- Ensure the siren itself is functional.
- Verify the siren output wire from the main control unit is correctly connected.
If these steps do not resolve the issue, it is recommended to consult a professional automotive electrician or contact Shkalacar customer support.
Specifications
| Brand | Shkalacar |
| Model Number | PGR9006383575130AE |
| Item Weight | 1.15 pounds |
| Package Dimensions | 6.97 x 4.72 x 3.58 inches |
| Maximum Remote Range | 100 Meters |
| Remote Control Included | Yes (2 units) |
Maintenance
To ensure the longevity and optimal performance of your Shkalacar Car Keyless Entry System, follow these maintenance guidelines:
- Remote Control Batteries: Replace batteries in the remote controls when their range decreases or they become unresponsive. Typically, these use small coin-cell batteries.
- Keep Components Dry: Ensure the main control unit and other electronic components are kept dry and free from moisture.
- Wiring Inspection: Periodically inspect wiring connections for any signs of wear, corrosion, or loose connections. Secure or repair as needed.
- Cleanliness: Keep the remote controls and external components clean. Use a soft, dry cloth for cleaning. Avoid harsh chemicals.
Warranty and Support
Specific warranty information for the Shkalacar Car Keyless Entry System is typically provided with the product packaging or on the manufacturer's official website. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please refer to the contact information provided by Shkalacar at the time of purchase or visit their official support channels.