1. Introduction
This manual provides instructions for the safe and effective use of your Zojirushi SX-KA30HM Stainless Carry Tumbler. Please read this manual thoroughly before use and retain it for future reference. This tumbler is designed for superior heat and cold retention, making it ideal for various beverages.
2. Product Features
- Stainless Steel Vacuum Insulation: Maintains beverage temperature, keeping hot drinks hot and cold drinks cold for extended periods.
- Flip Lid with Safety Lock: Prevents accidental opening and spills.
- Leak-Proof, Gasket-Free, One-Piece Lid: Designed for easy cleaning and to prevent loss of small parts.
- SlickSteel® Polished Stainless Steel Interior: Resists odors and stains, ensuring a clean taste.
- BPA-Free Construction: All parts are made from BPA-free plastic and high-quality 18/8 stainless steel.
- Condensation Minimization: The lid design helps reduce condensation formation.
Image 2.1: The Zojirushi SX-KA30HM Stainless Carry Tumbler in Forest Gray.
Image 2.2: The tumbler lid in the open position, showing the drinking spout.
3. Setup and Initial Use
3.1 Unpacking
Carefully remove the tumbler from its packaging. Inspect all components for any damage. If any parts are damaged or missing, do not use the product and contact customer support.
3.2 Initial Cleaning
Before first use, wash the tumbler body and lid thoroughly with warm water and a mild dish soap. Rinse all parts completely and allow them to air dry. Ensure the lid is completely dry before reassembling.
Image 3.1: The wide opening of the tumbler facilitates easy cleaning with a sponge.
4. Operating Instructions
4.1 Filling the Tumbler
- Ensure the lid is securely closed and locked before filling.
- Unscrew the lid from the tumbler body.
- Pour your desired beverage into the tumbler. Do not overfill; leave approximately 1 inch (2.5 cm) of space from the rim to prevent spills when attaching the lid.
- For optimal temperature retention, pre-heat with hot water for hot beverages or pre-chill with cold water for cold beverages for a few minutes before filling with your drink.
4.2 Securing the Lid
- Align the lid with the tumbler body and screw it on clockwise until it is firmly tightened.
- Ensure the flip lid is closed and the safety lock is engaged to prevent accidental opening.
Image 4.1: The tumbler with its flip lid securely closed and safety lock engaged.
4.3 Drinking from the Tumbler
- Slide the safety lock to the unlocked position.
- Press the button to flip open the lid.
- Drink directly from the spout.
- After drinking, close the flip lid and engage the safety lock to prevent spills.
4.4 Temperature Retention
The Zojirushi SX-KA30HM tumbler offers excellent temperature retention:
- Heat Retention: Approximately 129°F (54°C) after 6 hours.
- Cold Retention: Approximately 50°F (10°C) after 6 hours.
Image 4.2: The tumbler effectively retains cold temperatures, as shown with ice inside.
5. Maintenance and Cleaning
5.1 Daily Cleaning
It is recommended to clean the tumbler after each use.
- Unscrew the lid from the tumbler body.
- Wash the tumbler interior and exterior with warm water and a mild dish soap using a soft sponge or bottle brush.
- Wash the lid thoroughly, paying attention to the drinking spout and the seamless gasket area. The one-piece lid design simplifies cleaning as there are no removable gaskets to lose.
- Rinse all parts thoroughly with clean water.
- Allow all parts to air dry completely before reassembling or storing.
Important: This tumbler is for hand wash only. Do not use a dishwasher, as this may damage the exterior finish and insulation properties.
Image 5.1: The lid features an integrated seamless gasket for easy cleaning and leak prevention.
5.2 Stain and Odor Removal
For stubborn stains or odors, a mixture of warm water and a tablespoon of baking soda can be used. Let it soak for a few hours or overnight, then rinse thoroughly. The SlickSteel® interior is designed to minimize these issues.
6. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Tumbler leaks | Lid not screwed on tightly; flip lid not closed; safety lock not engaged; overfilling. | Ensure lid is securely tightened. Close the flip lid and engage the safety lock. Do not fill past the recommended line. |
| Beverage does not stay hot/cold | Lid not properly sealed; tumbler not pre-heated/chilled; extreme ambient temperature. | Verify the lid is tightly closed and the flip lid is sealed. Pre-heat or pre-chill the tumbler. Avoid leaving in extreme temperatures. |
| Unpleasant odor/taste | Incomplete cleaning; residue from previous beverages. | Clean thoroughly with warm water and mild soap. For persistent odors, use a baking soda solution (see Section 5.2). |
7. Specifications
| Feature | Detail |
|---|---|
| Model Number | SX-KA30HM |
| Capacity | 10.1 Ounces (approximately 300 ml) |
| Color | Forest Gray |
| Material | 18/8 Stainless Steel, BPA-free Plastic |
| Dimensions (W x H) | 2 inches x 8 inches (approximate) |
| Item Weight | 8.8 ounces (approximately 0.25 kg) |
| Heat Retention (6 hrs) | 129°F (54°C) |
| Cold Retention (6 hrs) | 50°F (10°C) |
| Care Instructions | Hand Wash Only |
8. Warranty and Support
8.1 Warranty Information
Zojirushi offers a 5-year warranty on the heat retention performance of this product. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage resulting from misuse, accidents, or unauthorized modifications.
8.2 Customer Support
For further assistance, product inquiries, or warranty claims, please visit the official Zojirushi website or contact their customer service department. Contact information can typically be found on the Zojirushi website or product packaging.