SuperEQ S8 Bluetooth Active Noise Cancelling Headphones User Manual

1. Introduction

Thank you for choosing the SuperEQ S8 Bluetooth Active Noise Cancelling Headphones. This manual provides essential information for setting up, operating, and maintaining your headphones to ensure optimal performance and longevity. The S8 headphones are designed to deliver high-fidelity audio with effective active noise cancellation, allowing for an immersive listening experience in various environments.

2. Product Overview

Familiarize yourself with the components of your SuperEQ S8 headphones.

Figure 2.1: SuperEQ S8 Headphones
An image showing the SuperEQ S8 headphones. They are black with gold-colored metal accents connecting the earcups to the headband. The earcups are cushioned in black, and the headband has a tan-colored padding on the underside. The model number 'S8' is visible on the right earcup's hinge.

Key Components:

• Adjustable Headband: For comfortable fit.
• Cushioned Earcups: Designed for comfort and passive noise isolation.
• Control Buttons: Power, Volume, ANC, and Multi-function buttons (exact layout may vary, refer to specific product for detailed button functions).
• Microphone: For hands-free calls.
• Charging Port: For recharging the internal battery.
• Audio Input Jack: For wired connection.

3. Setup

3.1 Charging the Headphones

Before first use, fully charge your SuperEQ S8 headphones.

1. Connect the provided USB charging cable to the charging port on the headphones.
2. Connect the other end of the USB cable to a USB power adapter (not included) or a computer's USB port.
3. The LED indicator will illuminate (e.g., red) during charging and change color (e.g., blue or off) when fully charged.
4. A full charge typically takes approximately 2-3 hours.

Note: Do not use chargers with a voltage higher than 5V to avoid damage to the headphones.

3.2 Bluetooth Pairing

Pair your headphones with your Bluetooth-enabled device (smartphone, tablet, laptop, etc.).

1. Ensure the headphones are fully charged and turned off.
2. Press and hold the Power/Multi-function button for approximately 5-7 seconds until the LED indicator flashes red and blue alternately, indicating pairing mode.
3. On your device, enable Bluetooth and search for available devices.
4. Select "SuperEQ S8" from the list of found devices.
5. Once paired, the LED indicator will typically flash blue slowly or turn solid blue.
6. If a password is required, enter "0000".

Note: The headphones will automatically attempt to reconnect to the last paired device when powered on.

4. Operating Instructions

4.1 Power On/Off

• Power On: Press and hold the Power/Multi-function button for 2-3 seconds. The LED indicator will flash blue.
• Power Off: Press and hold the Power/Multi-function button for 3-4 seconds. The LED indicator will flash red and then turn off.

4.2 Active Noise Cancellation (ANC)

• Activate ANC: Locate the ANC switch or button (refer to your specific product for exact location). Slide the switch or press the button to turn ANC on. An indicator light (e.g., green) will illuminate.
• Deactivate ANC: Slide the switch or press the button again to turn ANC off. The indicator light will turn off.

Note: ANC can be used independently, even when the headphones are not connected via Bluetooth or are powered off (if battery allows).

4.3 Music Playback

• Play/Pause: Short press the Multi-function button.
• Volume Up: Short press the "+" button.
• Volume Down: Short press the "-" button.
• Next Track: Long press the "+" button.
• Previous Track: Long press the "-" button.

4.4 Phone Calls

• Answer/End Call: Short press the Multi-function button.
• Reject Call: Long press the Multi-function button for 2 seconds.
• Redial Last Number: Double-press the Multi-function button.

5. Wired Mode

The SuperEQ S8 headphones can also be used with an audio cable, even if the battery is depleted or if you prefer a wired connection.

1. Connect one end of the 3.5mm audio cable (not included) to the audio input jack on the headphones.
2. Connect the other end of the audio cable to the audio output jack of your device.
3. In wired mode, Bluetooth functions and some button controls may be disabled. ANC functionality may still be available if the headphones have battery power.

6. Maintenance and Care

• Cleaning: Wipe the headphones with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Storage: Store the headphones in a cool, dry place, away from direct sunlight and extreme temperatures. If storing for an extended period, charge them periodically to maintain battery health.
• Water Exposure: These headphones are not waterproof. Avoid exposure to water or excessive moisture.
• Handling: Avoid dropping or subjecting the headphones to strong impacts.

7. Troubleshooting

8. Specifications

9. Warranty and Support

SuperEQ products are designed and manufactured to the highest quality standards. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official SuperEQ website. If you encounter any issues or require technical assistance, please contact SuperEQ customer support through their official channels.

Manufacturer: SuperEQ