Introduction
This manual provides essential information for the ICON FITNESS Front Transport Large Wheel, part number 349847. It covers product overview, compatibility, installation guidance, maintenance, and specifications to ensure proper use and longevity of the component.
Product Overview
The Front Transport Large Wheel (Part #349847) is a replacement component designed for specific elliptical machines. Its primary function is to facilitate the movement and relocation of the exercise equipment.
Figure 1: The ICON FITNESS Front Transport Large Wheel, part number 349847. This image displays the wheel from a top-down angle, showing its black, durable construction and central axle opening.
Figure 2: Underside view of the ICON FITNESS Front Transport Large Wheel. This perspective highlights the wheel's robust design and the internal structure around the axle.
Compatibility
This transport wheel (Part #349847) is compatible with the following elliptical models. It is crucial to verify your equipment's model name and number before purchasing or installing this part.
NordicTrack Models:
- AudioStrider 990 Pro - NTEL994130
- CANADAEL E 7.7 - 23887C0, 23887C1
- E 10.0 - NTEVEL990141
- E 7.7 - 831.238872, 831.238870, 831.238871 (Spanish), 831.23887C0 (Canadian)
- SE 9i - NTEL098130
- Space Saver SE 9i - NTEL098140, NTEL09814C0
- SPACESAVER SE 7I - NTEL994131, 831.238931, NTEL994160, NTEL994162, NTEL99416C0, NTEVEL909170
- SPACESAVER SE 9I - NTEL144160, NTEL144161, NTEL144162
ProForm Models:
- 9.0 ET - PFEL010140
- 935 E - PFEL199140
- SMART STRIDER 6.5 - PFEL077160, PFEL077162
- SMART STRIDER 695 CSE - PFEL069160, PFEL069162, PFEVEL807170
- Smart Strider 735 - PFEL180140, PFEL180141
- SMART STRIDER 8.0 - PFEL097160, PFEL097162
- SMART STRIDER 895 CSE - PFEL089160, PFEL089162
- Smart Strider 935 - PFEL199141, PFEL199142
Setup and Installation
Proper installation of the transport wheel is essential for the safe and effective operation of your elliptical machine. If you are uncomfortable with diagnosing or replacing parts, it is recommended to consult a qualified fitness technician.
Identifying the Correct Part:
- Locate Model Information: Find the model name and model number (for ICON products) or serial number (for other manufacturers) on your exercise equipment.
- Verify Part Number: Ensure the part number 349847 matches the required replacement part for your specific model.
General Installation Steps (Consult your equipment's specific manual for detailed instructions):
- Safety First: Always unplug the elliptical from its power source before attempting any maintenance or installation.
- Access the Wheel: Depending on your elliptical model, you may need to remove covers or other components to access the existing transport wheel.
- Remove Old Wheel: Carefully detach the old transport wheel. Note the orientation and any fasteners used.
- Install New Wheel: Position the new transport wheel (Part #349847) in the correct location. Secure it using the appropriate fasteners. Ensure it rotates freely.
- Reassemble: Reattach any covers or components that were removed.
- Test: Once reassembled, gently test the elliptical's transport function to ensure the new wheel operates correctly.
Figure 3: An exploded diagram illustrating various components of an elliptical machine. The transport wheel (indicated by the red arrow and number 109) is typically located at the front base of the equipment, facilitating movement.
Operating the Transport Wheels
The transport wheels are designed to assist in moving your elliptical machine. To move the equipment, carefully lift the rear of the elliptical until the front transport wheels make contact with the floor. Then, push or pull the machine to its desired location. Always ensure the path is clear and move the equipment slowly to prevent damage or injury.
Maintenance
Regular maintenance helps extend the life of your transport wheels and ensures smooth operation of your elliptical.
- Cleaning: Periodically clean the wheels to remove dust, dirt, and debris that can accumulate and hinder smooth movement. Use a damp cloth and mild detergent if necessary.
- Inspection: Regularly inspect the wheels for signs of wear, cracks, or damage. Ensure they rotate freely and are securely attached.
- Lubrication: The wheels are typically self-lubricating, but if you notice squeaking or stiffness, consult your elliptical's main manual for specific lubrication recommendations for its moving parts. Avoid over-lubricating the wheel surface itself.
Troubleshooting
If you experience issues with your transport wheels, consider the following:
- Difficulty Moving Equipment: Check if the wheels are obstructed by debris or if they are damaged. Ensure the floor surface is smooth and clear.
- Wobbly or Loose Wheel: Inspect the wheel's attachment points. Tighten any loose fasteners. If the wheel itself is damaged, replacement may be necessary.
- Unusual Noises: Squeaking or grinding noises may indicate a need for cleaning, inspection for damage, or, in rare cases, lubrication if specified by your elliptical's manufacturer.
If you are unable to resolve an issue or are uncomfortable performing diagnostics, it is advisable to contact a professional fitness equipment technician. ICON FITNESS can often recommend technicians in your area based on your zip code.
Specifications
| Part Number: | 349847 |
| Brand: | ICON FITNESS |
| Size: | Large |
| Color: | Silver or Gray (as per product listing, actual product is black) |
| Pitch Circle Diameter: | 8 Inches |
| Load Index: | 300 |
| Item Weight: | 1 pound |
| Product Dimensions: | 6 x 8 x 1 inches |
| UPC: | 697273401902 |
Warranty and Support
For specific warranty information regarding replacement parts, please refer to the original purchase documentation or contact ICON FITNESS directly. If you require assistance with diagnosing issues or finding a qualified technician, you may reach out to ICON FITNESS customer support.
Contact Information: Please visit the official ICON FITNESS website or refer to your elliptical's main user manual for current customer support contact details.