Introduction
This manual provides essential instructions for the safe and effective use of your Digipartspower AC Adapter. This adapter is specifically designed to provide power to compatible TECSUN FM/AM/SW radio models, including R909, R-911, R912, R-919, and DR-920. Please read this manual thoroughly before using the product and retain it for future reference.
Safety Information
WARNING: To reduce the risk of fire or electric shock, carefully follow these instructions:
- Do not expose the adapter to rain or moisture.
- Do not use the adapter if the cord or plug is damaged.
- Ensure the adapter is connected to a power outlet with the correct voltage as specified on the adapter label.
- Keep the adapter away from heat sources and direct sunlight.
- Do not attempt to disassemble or modify the adapter.
- Always unplug the adapter from the power outlet when not in use or before cleaning.
- This adapter is intended for indoor use only.
Package Contents
Verify that all items are present in your package:
- 1 x Digipartspower AC Adapter
- (Note: Compatible device, such as TECSUN radio, is not included.)
Setup
Inspect the Adapter: Before use, visually inspect the AC adapter and its cable for any signs of damage. Do not use if damaged.
This image shows the Digipartspower AC Adapter, featuring its main body, the two-pin power plug, and the micro USB output connector. The adapter is designed to provide power to compatible devices.
Connect to Radio: Locate the power input port on your TECSUN radio (R909, R-911, R912, R-919, or DR-920). Carefully insert the micro USB connector of the AC adapter into the radio's power input port. Ensure a firm and secure connection.
Connect to Power Outlet: Plug the two-pin power plug of the AC adapter into a standard wall power outlet. Ensure the outlet is easily accessible and provides the correct voltage.
Power On: Once connected, your TECSUN radio should receive power. Refer to your radio's specific manual for instructions on powering it on and confirming power reception.
Operating
The Digipartspower AC Adapter functions as a direct power source for your compatible TECSUN radio. It is designed for continuous operation when connected to a power outlet.
- Powering the Radio: Once the adapter is properly connected to both the radio and a power outlet, the radio will draw power directly from the adapter.
- Charging (if applicable): If your TECSUN radio model supports charging via its power input, the adapter will also facilitate battery charging. Consult your radio's manual to confirm its charging capabilities.
- Disconnection: To disconnect, first turn off your radio, then unplug the adapter from the wall outlet, and finally disconnect the micro USB connector from the radio.
Maintenance
Proper maintenance ensures the longevity and safe operation of your AC adapter.
- Cleaning: Disconnect the adapter from the power outlet and the radio before cleaning. Use a soft, dry cloth to wipe the exterior of the adapter. Do not use liquid cleaners or abrasive materials.
- Storage: When not in use, store the adapter in a cool, dry place, away from direct sunlight and extreme temperatures. Avoid tightly coiling the cable to prevent damage.
- Inspection: Periodically inspect the cable and connectors for any signs of wear, cuts, or damage. If damage is observed, discontinue use immediately and replace the adapter.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not power on. | Adapter not properly connected; Power outlet not active; Damaged adapter. | Ensure micro USB is fully inserted into radio. Check if power outlet is working by plugging in another device. Inspect adapter for damage; if damaged, replace. |
| Intermittent power to radio. | Loose connection; Damaged cable. | Verify all connections are secure. Inspect cable for kinks or breaks; replace if damaged. |
| Adapter feels unusually hot. | Overload; Poor ventilation; Internal fault. | Unplug immediately. Ensure adapter is not covered or in an enclosed space. If problem persists, discontinue use and replace. |
Specifications
| Feature | Detail |
|---|---|
| Brand | Digipartspower |
| Connector Type | Micro USB |
| Compatible Devices | TECSUN FM/AM/SW Radio (R909, R-911, R912, R-919, DR-920) |
| Total USB Ports | 1 |
| Main Power Connector Type | 2 Pin |
| Mounting Type | Wall Mount |
| Connectivity Technology | USB |
Warranty and Support
Digipartspower products are manufactured to high-quality standards. For specific warranty information, please refer to the product packaging or contact Digipartspower customer support directly. If you encounter any issues or have questions regarding your AC adapter, please reach out to the seller or manufacturer for assistance.
Contact information for support is typically available on the product packaging or the official Digipartspower website.