Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your Cielsa Dawn Front Door Handleset with Door Knob, Model CD-P-L-20. Please read all instructions carefully before beginning installation to ensure proper function and safety.
Package Contents
Before installation, verify that all components are present. Refer to the diagram below for identification.
Figure 1: Exploded view of the Cielsa Dawn handleset components. This includes the exterior handleset, interior knob, deadbolt, latches, strike plates, and mounting hardware.
- Exterior Handleset Assembly
- Interior Door Knob Assembly
- Deadbolt Latch
- Spring Latch
- Strike Plates (for deadbolt and spring latch)
- Mounting Screws
- Keys (3 included)
- Installation Template
Setup and Installation
The Cielsa Dawn handleset is designed for easy installation and fits door thicknesses from 1-3/8 inches to 1-3/4 inches. It is suitable for both right-handed and left-handed doors. A 6-way latch adjusts to fit 2-3/8 inch or 2-3/4 inch backset.
Tools Required:
- Phillips Head Screwdriver
- Measuring Tape
- Pencil
- Drill (optional, for new installations)
Installation Steps:
- Prepare the Door: Ensure the door has standard bore holes (2-1/8 inch diameter) and a backset of either 2-3/8 inches or 2-3/4 inches. If installing on a new door, use the provided template to mark and drill the necessary holes.
- Install the Latches: Insert the deadbolt latch into the upper bore hole and the spring latch into the lower bore hole on the door edge. Secure them with the provided screws. Ensure the latches are oriented correctly for your door's swing.
- Install the Exterior Handleset: Position the exterior handleset assembly, ensuring the spindle passes through the spring latch mechanism and the deadbolt tailpiece aligns with the deadbolt latch.
- Install the Interior Knob: Attach the interior door knob assembly, aligning it with the exterior handleset. Secure both assemblies using the long mounting screws through the interior side.
- Test Functionality: After installation, test both the deadbolt and the spring latch with the interior knob and the key from the exterior to ensure smooth operation.
- Install Strike Plates: Mount the strike plates on the door frame, aligning them with the latches. Secure with screws.
Video 1: This video demonstrates the installation process for the Cielsa Dawn Front Door Handleset, including how to install the latches and secure the components.
For visual guidance, please refer to the installation video provided above.
Operation
Your Cielsa Dawn handleset provides secure entry and exit for your front door.
Locking the Door:
- From the Exterior: Insert the key into the deadbolt cylinder and turn to extend the deadbolt. The lower handle can be locked by turning the key in the cylinder located on the handleset.
- From the Interior: Turn the thumb-turn on the interior deadbolt to extend it. The interior knob can be locked by turning the small knob on its center.
Unlocking the Door:
- From the Exterior: Insert the key into the deadbolt cylinder and turn to retract the deadbolt. Use the key in the lower cylinder to unlock the handleset.
- From the Interior: Turn the thumb-turn on the interior deadbolt to retract it. Rotate the interior knob to retract the spring latch.
Maintenance
Regular maintenance ensures the longevity and smooth operation of your handleset.
- Cleaning: Clean the handleset with a soft, damp cloth. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish.
- Lubrication: Periodically apply a small amount of graphite lubricant to the keyway and latch mechanisms to maintain smooth operation. Do not use oil-based lubricants, as they can attract dirt and dust.
- Tightening Screws: Check all mounting screws periodically and tighten them if necessary to prevent loosening and ensure security.
Troubleshooting
If you encounter issues with your handleset, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Key is difficult to turn or sticky. | Lack of lubrication, dirt in keyway. | Apply graphite lubricant to the keyway. Clean the key. |
| Latch does not retract or extend smoothly. | Misalignment, debris in mechanism, loose screws. | Check alignment of latches and strike plates. Clean mechanism. Tighten screws. |
| Handleset feels loose. | Loose mounting screws. | Tighten all mounting screws securely. |
| Deadbolt does not engage fully. | Strike plate misalignment, door frame issues. | Adjust the deadbolt strike plate on the door frame. Check for door warp or frame issues. |
Specifications
- Model: CD-P-L-20
- Brand: Cielsa Dawn
- Material: Metal (Bronze)
- Finish: Polished Bronze
- Door Thickness: 1-3/8 in to 1-3/4 in
- Backset: Adjustable 2-3/8 in or 2-3/4 in
- Security Grade: ANSI Grade-3
- Handing: Reversible (fits both right-handed and left-handed doors)
- Product Dimensions: 16"L x 5.9"W
- Item Weight: 2.8 Pounds
- Included Components: Deadbolt, door knob with lock, screws, keys
Warranty & Support
This Cielsa Dawn handleset is backed by a 1-year limited warranty. This warranty covers defects in material and workmanship under normal use.
For warranty claims, technical support, or further assistance, please contact Cielsa Dawn customer service through the retailer where the product was purchased or visit the official Cielsa Dawn website.
Please have your model number (CD-P-L-20) and proof of purchase available when contacting support.