Nobleza Universal Extendable Car Pet Barrier

1. Introduction

This instruction manual provides essential information for the safe and effective installation and use of your Nobleza Universal Extendable Car Pet Barrier. Designed to enhance safety for both pets and passengers, this barrier prevents pets from accessing the front seats, reducing driver distraction and ensuring a secure travel environment. Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

• Always ensure the barrier is securely installed before driving.
• Do not use the barrier as a primary restraint system for your pet. Always use appropriate pet harnesses or carriers in conjunction with the barrier for maximum safety.
• Regularly check all connections and adjustments to ensure the barrier remains stable and properly positioned.
• Keep small children away from the barrier during installation to prevent injury.
• This barrier is designed for pet containment within the vehicle's rear area. It is not intended for human restraint.

3. Package Contents

Verify that all components are present before beginning installation.

• Extendable Pet Barrier Frame
• Adjustable Vertical Support Rods (2)
• Mounting Knobs/Screws (4)
• Headrest Attachment Hooks (2)

4. Specifications

5. Setup and Installation

The Nobleza Car Pet Barrier is designed for tool-free installation and universal fit in most vehicles.

5.1 Vehicle Compatibility

This barrier is universally adjustable to fit most SUVs, cars, jeeps, and hatchbacks. It is typically installed behind the front seats or in the cargo area.

5.2 Installation Steps

1. Assemble the Main Frame: Extend the main barrier frame to approximately the desired width for your vehicle's interior. The frame consists of two interlocking sections that slide to adjust width.
2. Attach Vertical Support Rods: Insert the two vertical support rods into the designated slots on the main barrier frame. Secure them using the provided mounting knobs. These rods allow for height adjustment and provide stability.
3. Position the Barrier: Place the assembled barrier in your vehicle. For installation behind the front seats, position it against the back of the front seats or between the headrests. For cargo area installation, place it at the rear of the back seats.
4. Secure to Headrests: Use the headrest attachment hooks to secure the top of the barrier to the metal posts of your vehicle's headrests. Adjust the vertical support rods to ensure the barrier is snug against the roof lining or the top of the seatbacks.
5. Adjust Width and Tighten: Fine-tune the width of the barrier by sliding the frame sections until it fits securely across the vehicle's interior. Tighten all mounting knobs firmly to prevent movement. Ensure there are no gaps large enough for your pet to pass through.

6. Operating Instructions

Once properly installed, the Nobleza Car Pet Barrier operates passively by creating a physical barrier. No further operational steps are required during travel. Its primary function is to maintain separation between the pet compartment and the driver/passenger area.

• Ensure your pet is safely secured in the rear compartment, ideally with a suitable harness or carrier, before starting your journey.
• Periodically check the barrier's stability during long trips.

7. Maintenance

To ensure the longevity and continued effectiveness of your pet barrier, follow these simple maintenance guidelines:

• Cleaning: Wipe the barrier with a damp cloth and mild detergent as needed. Avoid abrasive cleaners that could damage the finish.
• Inspection: Regularly inspect the barrier for any signs of wear, damage, or loose components. Pay close attention to the welds, adjustment mechanisms, and attachment points.
• Storage: When not in use, the barrier can be easily disassembled and folded for compact storage. Store in a dry place to prevent rust or corrosion.

8. Troubleshooting

• Barrier is not stable: Ensure all mounting knobs are fully tightened. Re-adjust the width and height to achieve a snug fit against the vehicle's interior. Verify that the headrest hooks are securely attached.
• Barrier does not fit my vehicle: Double-check the adjustable width (96-145 cm) and height (30 cm) against your vehicle's dimensions. While designed for universal fit, some vehicle models may have unique interior configurations.
• Pet is getting around the barrier: Ensure the barrier is extended to its maximum possible width for your vehicle, leaving no significant gaps. Consider using additional pet safety accessories like a car seat cover or pet hammock to further secure the area.

9. Warranty and Support

Nobleza is committed to providing high-quality products. For specific warranty details, please refer to the product packaging or contact your retailer. If you have any questions regarding the installation, operation, or maintenance of your Nobleza Car Pet Barrier, please contact Nobleza customer support through the retailer's platform or the official Nobleza website for assistance.