TBVECHI Electric Scooter Seat Instruction Manual

1. Product Overview

This manual provides instructions for the TBVECHI Electric Scooter Seat, designed to enhance comfort during electric scooter use. It is specifically compatible with Xiaomi M365 and Xiaomi M365 Pro electric scooters.

2. Key Features

• Comfortable Riding: Features an oxidized aluminum alloy support rod, a seat cushion made of PU and high-elastic sponge, and an iron base for durability and comfort. Supports a maximum load capacity of 220 lbs (100 kg).
• Height Adjustable: The support frame can be adjusted from 17.71 inches (45 cm) to 25.6 inches (65 cm) to accommodate users up to 6 feet (1.85 m) in height. A high-elastic spring under the cushion helps absorb shocks from rough road surfaces.
• Buckle Installation: The base is equipped with screws for installation, eliminating the need to drill holes in your scooter. This design prevents damage to the original scooter. The ergonomically designed cushion provides a comfortable fit.
• Lightweight & Portable: Weighing only 3.52 lbs (1.6 kg), this scooter seat adds minimal weight to your scooter, making it easy to carry or store. The seat's wiring is designed for durability, tear-resistance, and wear-resistance.
• Stylish Design: The black and red color scheme offers a modern and eye-catching appearance.

3. Package Contents

Verify that all components are present in the package:

• 1 x Scooter Seat Assembly
• 1 x English Installation Diagram
• 1 x Screwdriver

4. Safety Information

• Always ensure the seat is securely installed before riding.
• Do not exceed the maximum load capacity of 220 lbs (100 kg).
• Regularly check all fasteners and adjustment mechanisms for tightness.
• Ensure the seat height is adjusted appropriately for your comfort and control.
• Always wear appropriate safety gear when operating an electric scooter.

5. Setup and Installation

Follow these steps to install the electric scooter seat:

1. Install the Seat Bag: Use the provided screwdriver to attach the seat bag to the fixed buckle of the telescopic tube. Pay attention to the correct installation direction.
2. Insert Support Bottom Tube: Insert the support bottom tube into the base.
3. Insert Telescopic Tube: Insert the telescopic tube into the support bottom tube and secure it with the buckle.
4. Finalize Installation: Ensure all components are firmly attached and stable.

Installation Video Guide

6. Operating Instructions

Adjusting Seat Height

The seat height can be adjusted to suit your preference and riding style. Locate the adjusting clip on the telescopic tube. Loosen the clip, slide the inner tube to the desired height, and then firmly secure the clip to lock the seat in position. The seat height can be adjusted between 17.71 inches (45 cm) and 25.6 inches (65 cm).

7. Maintenance

• Clean the seat cushion with a damp cloth and mild soap. Avoid harsh chemicals.
• Periodically check all bolts and fasteners for tightness and re-tighten if necessary.
• Inspect the telescopic rod and spring mechanism for any signs of wear or damage.
• Store the scooter seat in a dry place when not in use to prevent corrosion.

8. Troubleshooting

• Seat feels loose: Check all quick-release levers and screws on the base and telescopic tube. Tighten them securely.
• Difficulty adjusting height: Ensure the quick-release lever is fully open before attempting to adjust. Clean any dirt or debris from the telescopic tube.
• Unusual noises: Inspect all connections for proper assembly. Lubricate moving parts if necessary, avoiding contact with the seat cushion.

9. Specifications

10. Warranty and Support

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official TBVECHI website. Keep your purchase receipt as proof of purchase.