Borofone BO2 Fine Move Wireless Headphones User Manual

Introduction

Thank you for choosing the Borofone BO2 Fine Move Wireless Headphones. This manual provides detailed instructions on how to set up, operate, and maintain your headphones to ensure optimal performance and longevity. Please read this manual carefully before using the product.

Safety Information

• Do not expose the headphones to extreme temperatures, humidity, or corrosive substances.
• Avoid dropping or subjecting the headphones to strong impacts.
• Do not disassemble or modify the headphones. This will void the warranty and may cause damage.
• Keep the headphones away from children and pets.
• Use only the provided or certified charging cables and adapters.
• Listen at moderate volume levels to prevent hearing damage.

Package Contents

• Borofone BO2 Fine Move Wireless Headphones
• USB Charging Cable
• 3.5mm Audio Cable
• User Manual

Product Overview

Familiarize yourself with the components of your Borofone BO2 headphones.

Figure 1: Borofone BO2 Fine Move Wireless Headphones in Metal Gray. The image shows the headphones unfolded, with the adjustable headband and cushioned earcups visible. The right earcup has the 'BOROFONE' logo printed on it. The left earcup appears to have control buttons and ports on its side.

• Headband: Adjustable for comfortable fit.
• Earcups: Padded for comfort, housing the 40mm speakers.
• Control Buttons: (e.g., Power, Volume Up/Down, Play/Pause, Call Answer/End)
• Microphone: For hands-free calls.
• Charging Port: For recharging the internal battery.
• 3.5mm Audio Jack: For wired connection.
• LED Indicator: Shows power, charging, and pairing status.

Setup

1. Charging the Headphones

Before first use, fully charge your headphones. The Borofone BO2 headphones are equipped with a 300mAh polymer battery.

1. Connect the charging cable to the charging port on the headphones.
2. Connect the other end of the charging cable to a USB power source (e.g., computer USB port, USB wall adapter).
3. The LED indicator will typically show a red light during charging and turn off or change color (e.g., blue) when fully charged.
4. Charging time is approximately 3 hours.

2. Bluetooth Pairing

Pair your headphones with your Bluetooth-enabled device (e.g., smartphone, tablet, laptop).

1. Ensure the headphones are fully charged and turned off.
2. Press and hold the Power button on the headphones until the LED indicator flashes red and blue alternately, indicating pairing mode.
3. On your device, go to Bluetooth settings and turn on Bluetooth.
4. Search for available devices. You should see "BOROFONE BO2" or similar in the list.
5. Select "BOROFONE BO2" to connect. Once connected, the LED indicator will typically flash blue slowly or turn solid blue.
6. If prompted for a password, enter "0000" (four zeros).
7. The headphones will automatically reconnect to the last paired device when turned on, if the device's Bluetooth is active and within range.

Operating Instructions

Power On/Off

• Power On: Press and hold the Power button for approximately 3 seconds until the LED indicator lights up.
• Power Off: Press and hold the Power button for approximately 3-5 seconds until the LED indicator turns off.

Music Playback

• Play/Pause: Press the Multi-function button (often the Power button) once.
• Next Track: Press and hold the Volume Up button.
• Previous Track: Press and hold the Volume Down button.
• Volume Up: Short press the Volume Up button.
• Volume Down: Short press the Volume Down button.

Call Management

• Answer/End Call: Press the Multi-function button once.
• Reject Call: Press and hold the Multi-function button for 2 seconds.
• Redial Last Number: Double-press the Multi-function button.

Wired Mode (3.5mm Audio Jack)

You can use the headphones in wired mode even if the battery is depleted.

• Connect one end of the 3.5mm audio cable to the headphone's audio jack.
• Connect the other end to your audio source's 3.5mm output.
• In wired mode, the headphone's controls (volume, play/pause) may not function, and you will need to control playback from your connected device.

Maintenance

• Cleaning: Use a soft, dry cloth to wipe the headphones. Do not use abrasive cleaners or solvents.
• Storage: Store the headphones in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Care: To prolong battery life, avoid fully discharging the battery frequently. Charge the headphones regularly, even if not in use for extended periods.

Troubleshooting

Specifications

• Model: BO2
• Speaker Diameter: 40mm
• Wireless Specification: V5.0 JL
• Charging Voltage: DC-5V
• Charging Time: Approximately 3 hours
• Calls / Music Time: Approximately 10 hours
• Standby Time: 200 hours
• Battery Capacity: 300mAh polymer battery
• Dimensions: 185 x 175 x 70mm
• Weight: 139gm
• Connectivity: Wireless (Bluetooth), Wired (3.5mm Jack)
• Color: Grey
• Material: Mixed Materials

Warranty and Support

Borofone products are designed and manufactured to the highest quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Borofone website. Please retain your proof of purchase for warranty claims.

For further assistance, you may contact Borofone customer service through their official channels.