Introduction
Thank you for choosing the Virone DT-1(GS) Digital Timer. This manual provides detailed instructions for the safe and efficient operation of your device. Please read this manual thoroughly before use and retain it for future reference. This timer is designed for the German market and features a Schuko plug.
Product Overview
The Virone DT-1(GS) is a versatile digital timer with an LCD screen, offering 16 programmable ON/OFF settings to automate your electrical appliances. It features a built-in rechargeable battery to retain settings during power outages.
Figure 1: Front view of the Virone DT-1(GS) Digital Timer. This image displays the timer's LCD screen, showing the current time (08:30) and day (TU for Tuesday), along with indicators for program status (PROGRAM 1 ON OFF). Below the screen are the control buttons: SET, CLOCK, PROG, and UP, with an OK/RESET button in the center.
Figure 2: Detailed LCD display of the Virone DT-1(GS) Digital Timer. This image shows all possible segments of the LCD screen illuminated, indicating the various functions and display options available, such as days of the week (MO TU WE TH FR SA SU), AM/PM, ON/OFF, AUTO, RANDOM, SUMMER, and COUNTDOWN modes. This helps in understanding the full capabilities of the display.
Figure 3: Side profile of the Virone DT-1(GS) Digital Timer. This image provides a view of the timer's depth and the design of its Schuko plug, which is suitable for German electrical outlets.
Figure 4: Back view of the Virone DT-1(GS) Digital Timer. This image clearly shows the product label, which includes important specifications such as voltage (230V, 50Hz), maximum load power (3680W), maximum load current (16A), and accuracy (+/- 2%). The CE marking and manufacturer information are also visible.
Setup
1. Initial Charge and Reset
Before first use, plug the timer into a wall socket for approximately 5-10 minutes to charge its internal battery. This battery retains your settings during power outages. After charging, use a pointed object (like a pen tip) to press the RESET button (small red dot next to OK) to clear all previous settings and ensure proper operation.
2. Setting the Current Time and Day
- Press and hold the CLOCK button.
- While holding CLOCK, press the PROG button repeatedly to select the current day of the week (MO, TU, WE, TH, FR, SA, SU).
- While holding CLOCK, press the SET button repeatedly to set the current hour.
- While holding CLOCK, press the UP button repeatedly to set the current minute.
- Release the CLOCK button. The time and day are now set.
Operating Instructions
1. Programming ON/OFF Cycles (16 Programs)
The timer allows you to set up to 16 different ON/OFF programs. Each program consists of an ON time and an OFF time.
- Press the PROG button once. The display will show "1 ON".
- Press PROG repeatedly to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all days.
- Press SET to set the hour for the "ON" time.
- Press UP to set the minute for the "ON" time.
- Press PROG again. The display will show "1 OFF".
- Repeat steps 2-4 to set the day(s), hour, and minute for the "OFF" time.
- Continue pressing PROG to set subsequent programs (2 ON, 2 OFF, etc.) up to 16 programs.
- To exit programming mode, press the CLOCK button.
2. Manual Override Modes (ON/AUTO/OFF)
Press the SET button repeatedly to cycle through the operating modes:
- AUTO ON: The timer will follow your programmed ON times.
- AUTO OFF: The timer will follow your programmed OFF times.
- ON: The connected appliance will remain continuously ON, overriding all programs.
- OFF: The connected appliance will remain continuously OFF, overriding all programs.
For automatic operation based on your programs, ensure the timer is set to AUTO ON or AUTO OFF.
3. Countdown Function
The countdown function allows you to set a specific duration after which the timer will switch the connected appliance ON or OFF. This function can be complex to set up initially.
- Press and hold PROG and UP simultaneously to enter countdown setting mode. The display will show "COUNTDOWN".
- Press SET to adjust hours, UP to adjust minutes, and PROG to adjust seconds for the countdown duration.
- Press the CLOCK button (which also functions as OK) to confirm the duration.
- Press SET to toggle between ON (appliance turns ON after countdown) or OFF (appliance turns OFF after countdown).
- Press the CLOCK button to start the countdown.
- To cancel an active countdown, press the CLOCK button, then press SET until the countdown display disappears or shows "OFF".
Tip: If you only want to use a single countdown setting, ensure the second countdown setting (if prompted) is set to 0 hours, 0 minutes, 0 seconds, and OFF.
4. Random Function
The random function activates and deactivates the connected appliance at irregular intervals, typically used for security purposes when away from home.
- Press the PROG button repeatedly until "RANDOM" appears on the display.
- The timer will now switch ON and OFF randomly within a certain time window (e.g., 10-30 minutes ON, then 10-30 minutes OFF).
- To deactivate, press PROG again until "RANDOM" disappears.
5. Summer Time Function
This function allows for a quick adjustment for daylight saving time.
- Press and hold the CLOCK button, then press the SET button. The display will show "SUMMER" and the time will advance by one hour.
- Repeat the action to revert to standard time.
Maintenance
The Virone DT-1(GS) Digital Timer requires minimal maintenance.
- Cleaning: Wipe the timer with a soft, dry cloth. Do not use abrasive cleaners or immerse the device in water.
- Battery: The internal rechargeable battery is designed for long-term use and typically does not require replacement. Ensure the timer is occasionally plugged into a live socket to keep the battery charged.
- Storage: Store the timer in a cool, dry place when not in use.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Timer display is blank or dim. | Internal battery is discharged. | Plug the timer into a live wall socket for 5-10 minutes to charge the battery. |
| Programs are not activating. | Timer is not in AUTO mode. Incorrect program settings. | Ensure the timer is set to AUTO ON or AUTO OFF. Double-check your program settings for correct times and days. |
| Countdown function is difficult to set or doesn't work. | Incorrect sequence or confirmation. | Follow the countdown instructions carefully. Ensure you press the CLOCK button to confirm duration and start. If prompted for a second setting, set it to 00:00:00 OFF. |
| Timer is unresponsive or behaving erratically. | Temporary software glitch. | Perform a full reset by pressing the RESET button with a pointed object. Note that this will erase all settings. |
Specifications
- Brand: Virone
- Model Number: DT-1(GS)
- Voltage (Power Supply): ~230V, 50Hz
- Maximum Load Power: 3680W
- Maximum Load Current: 16A
- Accuracy: +/- 2%
- Number of Programs: 16
- Item Weight: 250 Grams
- Package Dimensions: 15.9 x 8.3 x 8.3 cm
Warranty and Support
Specific warranty information is not provided in this manual. For warranty claims or technical support, please refer to the retailer where you purchased the product or contact Virone customer service directly. Keep your proof of purchase for any warranty-related inquiries.
