K KAMOER KCP-X-S10-B
Kamoer KCP-X Mini Peristaltic Pump User Manual
Brand: K KAMOER | Model: KCP-X-S10-B
1. Introduction
The Kamoer KCP-X mini peristaltic pump is a compact and versatile liquid dosing pump designed for precise fluid transfer in various applications. Its adjustable speed and low flow rate capabilities make it suitable for scientific research, aquarium maintenance, and industrial processes.
Key features include a 24V power supply, a silicone tube (3mm ID × 5mm OD), and an adjustable flow rate ranging from 19-65ml/min. The pump head features a snap-fit design for easy disassembly and maintenance.
Figure 1: Kamoer KCP-X pump demonstrating its compact size.
Figure 2: Typical applications for the KCP-X pump, including filling, laboratory work, cosmetics, and integration into equipment.
2. Safety Information
- Ensure the pump is connected to a stable 24V DC power source. Using an incorrect voltage may damage the device.
- Do not operate the pump in environments with extreme temperatures (outside 0-40℃) or high humidity (above 80%).
- Avoid submerging the pump in liquid.
- Always disconnect power before performing any maintenance or cleaning.
- Keep out of reach of children.
3. Product Overview
The KCP-X pump consists of the main unit, a peristaltic pump head, and a power input socket.
Figure 3: Bottom view of the KCP-X pump, highlighting the 24V power socket and model information (KCP-X-S10B, B8F1900001).
Figure 4: Top view of the KCP-X pump, illustrating the adjustable flow rate knob.
4. Specifications
| Attribute | Value |
|---|---|
| Brand | K KAMOER |
| Model Number | KCP-X-S10-B |
| Voltage | 24 Volts |
| Maximum Flow Rate | 65 Milliliters Per Minute |
| Minimum Flow Rate | 19 Milliliters Per Minute |
| Tube Material | Silicone |
| Tube Dimensions | 3mm ID × 5mm OD |
| Item Weight | 0.41 Pounds (approx. 185g) |
| Product Dimensions (L x W x H) | 2.83" x 3.41" x 3.16" (72mm x 86.5mm x 80.2mm) |
| Operating Temperature | 0-40℃ |
| Relative Humidity | <80% |
Figure 5: KCP-X pump dimensions (L:72mm, W:86.5mm, H:80.2mm).
Figure 6: Detailed technical drawing with pump dimensions.
5. Setup
- Unpacking: Carefully remove the pump and all accessories from the packaging. Inspect for any damage.
- Tube Connection: Connect the silicone tubes to the inlet and outlet ports of the pump head. Ensure a secure fit to prevent leaks. The standard tube size is 3mm ID × 5mm OD.
- Placement: Place the pump on a stable, flat surface. Ensure adequate ventilation around the unit.
- Power Connection: Connect the 24V power adapter to the power socket at the bottom of the pump (refer to Figure 3). Plug the power adapter into a suitable electrical outlet.
6. Operating Instructions
The KCP-X pump is designed for simple operation with an adjustable flow rate knob.
- Power On: Once connected to power, the pump is ready for operation.
- Adjusting Flow Rate: Rotate the knob on the top of the pump (refer to Figure 4) to adjust the flow rate. Turning the knob clockwise increases the flow rate, while turning it counter-clockwise decreases it. The flow rate can be adjusted within the range of 19-65ml/min.
- Operation Demonstration: Watch the video below for a visual demonstration of the pump's operation and flow rate adjustment.
Video 1: KCP-X peristaltic pump operation demonstration, showing adjustable flow rate and low noise operation.
7. Maintenance
Regular maintenance ensures optimal performance and longevity of your KCP-X pump.
- Pump Head Disassembly: The pump head features a snap-fit design for easy removal. Gently unclip the pump head from the main unit.
- Hose Replacement: The silicone hose inside the pump head is a consumable part and should be replaced periodically, especially if flow rate consistency decreases or the hose shows signs of wear. The snap-fit design allows for easy replacement of the hose.
- Cleaning: Clean the exterior of the pump with a soft, damp cloth. For the pump head and tubing, flush with appropriate cleaning solutions depending on the liquid being pumped. Ensure all components are dry before reassembly.
Figure 7: Disassembled view of the pump head, illustrating its snap-fit design for easy maintenance and hose replacement.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump not operating | No power, incorrect voltage, loose connection. | Check power adapter connection. Ensure 24V power supply. Verify outlet functionality. |
| Low or no flow | Kinked or blocked tubing, worn pump hose, air in the line. | Check tubing for kinks or blockages. Replace worn pump hose. Prime the pump if necessary to remove air. |
| Unusual noise/vibration | Pump not on a stable surface, worn pump head components, foreign object. | Ensure pump is on a stable surface. Inspect pump head for wear or debris. |
| Inconsistent flow rate | Worn pump hose, air bubbles, incorrect liquid viscosity. | Replace pump hose. Ensure no air bubbles in the system. Verify liquid properties are suitable for the pump. |
9. Warranty and Support
For warranty information, technical support, or inquiries regarding replacement parts, please contact the manufacturer, Kamoer Fluid Tech (Shanghai) Co., Ltd., or your authorized reseller. Please refer to your purchase documentation for specific warranty terms and conditions.
For additional information, you may visit the official Kamoer website: www.kamoer.com
Related Documents - KCP-X-S10-B
 |
KCP-KK300-D Adjustable Peristaltic Pump User Manual User manual for the Kamoer KCP-KK300-D adjustable peristaltic pump, detailing its features, specifications, operating conditions, interface description, and safety precautions. |
 |
Kamoer KAS Micro Peristaltic Pump Product Manual | Technical Specifications & Applications Comprehensive product manual for the Kamoer KAS Micro Peristaltic Pump. Details technical specifications, performance characteristics, typical applications, and adapter hose information. Includes model definitions and flow rate curves. |
 |
Kamoer FX-STP WIFI Peristaltic Pump User Manual User manual for the Kamoer FX-STP WIFI Peristaltic Pump, detailing installation, setup, operation, advanced settings, and troubleshooting. Learn how to connect and control the pump via the Kamoer Remote app. |
 |
Kamoer X4 Dosing Pump User Manual for iOS Comprehensive user manual for the Kamoer X4 Dosing Pump, providing detailed instructions on setup, iOS app connection (direct and auto-connect), software interface navigation (Time/Temperature, Automatic, Manual, Status, More, Calibration), maintenance, and technical support. |
 |
D-D P1 PRO Dosing Pump User Manual - Setup, Programming, and Calibration Guide Comprehensive user manual for the D-D P1 PRO intelligent dosing pump. Learn how to install, connect via Wi-Fi, program dosing plans, calibrate, and manage settings using the Kamoer Remote app. Features include automated liquid additive delivery for aquariums. |
 |
D-D P4 PRO Cloud Dosing Pump User Manual Comprehensive user manual for the D-D P4 PRO Cloud 4-channel intelligent dosing pump with Wi-Fi control. Learn about product features, installation, advanced settings, programming, manual addition, and calibration. |
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.