VASAGLE ULBC026B01V1 Bar Stools Instruction Manual

Introduction

This manual provides essential information for the safe assembly, operation, and maintenance of your VASAGLE Bar Stools (Model ULBC026B01V1). Please read these instructions carefully before assembly and retain them for future reference.

Image: Two VASAGLE bar stools, featuring rustic brown wooden seats and backrests, supported by sturdy black steel frames. These stools are designed for bar height counters.

Safety Information

To ensure safe use of your bar stools, please observe the following:

• Do not exceed the maximum weight capacity of 220 lbs (100 kg) per stool.
• Ensure all screws and bolts are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not stand on the stools.
• Avoid sudden movements or leaning excessively, especially when sitting on the edge.
• Keep children away from the assembly area. Small parts can be a choking hazard.
• Use the stools on a flat, stable surface to prevent tipping.

Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.

Image: An exploded diagram showing the individual components of the bar stool, labeled for easy identification during assembly. Parts include the seat, backrest, backrest support, circular frame, and legs.

• A: Seat (2x)
• B: Backrest (2x)
• C: Backrest Support (2x)
• D: Seat Frame (2x)
• E: Front Leg Assembly (2x)
• F: Rear Leg Assembly (2x)
• G: Footrest Ring (2x)
• Hardware Pack: Screws, Allen Wrench, Non-slip Pads (sufficient quantity for two stools)

Assembly Instructions

Follow these steps to assemble your VASAGLE Bar Stools. It is recommended to assemble on a soft, clean surface to prevent scratches.

1. Attach Backrest Support to Backrest: Secure part C (Backrest Support) to part B (Backrest) using the provided screws. Ensure a snug fit.
2. Assemble Leg Frame: Connect part E (Front Leg Assembly) and part F (Rear Leg Assembly) using the appropriate screws. Do not fully tighten yet.
3. Install Footrest Ring: Insert part G (Footrest Ring) into the designated slots on the leg frame. Secure with screws, but do not fully tighten.
4. Attach Seat Frame: Place part D (Seat Frame) onto the top of the leg assembly. Align the screw holes and attach with screws.
5. Attach Seat: Position part A (Seat) onto the seat frame (D). Secure it using the provided screws.
6. Attach Backrest Assembly: Connect the assembled backrest (B+C) to the main stool frame. Secure with screws.
7. Final Tightening: Once all parts are loosely assembled, place the stool on a flat surface. Apply gentle downward pressure to ensure it is level, then systematically tighten all screws completely. Do not overtighten.
8. Apply Non-slip Pads: Attach the non-slip pads to the bottom of each leg to protect your floor and enhance stability.

Repeat these steps for the second bar stool.

Usage Guidelines

These bar stools are designed for seating at bar height counters or tables. The seat height is 28.9 inches, suitable for counters between 40-43 inches (100-110 cm) high.

Image: Two bar stools placed at a kitchen island, illustrating their functional placement in a home environment.

• Always sit centrally on the seat for optimal balance and comfort.
• Utilize the integrated footrest for added comfort and stability.
• The curved backrest is ergonomically designed to provide support.

Image: A person seated on the bar stool, showcasing the ergonomic curved backrest and the convenient footrest for comfortable posture.

Care and Maintenance

Proper care will extend the life and appearance of your bar stools.

• Cleaning: Wipe surfaces with a damp cloth. Avoid harsh chemicals or abrasive cleaners that may damage the finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten as needed to maintain stability.
• Protection: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can affect the wood-look finish and steel frame.
• Floor Protection: Ensure non-slip pads on the legs are intact to prevent floor scratches. Replace if worn.

Troubleshooting

If you encounter any issues, refer to the following common solutions:

Specifications

Image: Detailed dimensional drawing of the bar stool, indicating measurements for height, seat diameter, and base footprint, along with the maximum weight capacity.

Warranty and Support

For any questions, missing parts, or concerns regarding your VASAGLE Bar Stools, please contact VASAGLE customer support. Refer to your purchase documentation for specific warranty details, as these may vary by retailer and region.

You can visit the official VASAGLE store for more information: VASAGLE Store on Amazon