1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your ANKEWAY 7-inch Android 2 DIN Car Stereo. Please read this manual thoroughly before using the product to ensure proper operation and to prevent damage.
2. Safety Information
Observe the following safety precautions to prevent injury or damage to the device:
- Do not operate the device while driving. Always ensure your vehicle is safely parked before interacting with the stereo.
- Ensure proper wiring and installation to avoid short circuits or electrical hazards. Consult a professional for installation if unsure.
- Keep the device away from water and excessive moisture.
- Do not attempt to disassemble or modify the unit. This may void the warranty and cause damage.
- Use only accessories and parts specified by the manufacturer.
3. Package Contents
Verify that all items are present in the package:
- ANKEWAY 7-inch Android Car Stereo Unit
- Power Cable Harness
- GPS Antenna
- USB Cables (x2)
- External Microphone
- Rear View Camera
- Mounting Brackets and Screws
- User Manual
- RCA Input/Output Cables
Image: Included components of the ANKEWAY 7-inch Android Car Stereo.
4. Product Overview
The ANKEWAY 7-inch Android Car Stereo features a high-definition touchscreen display and a range of connectivity options for an enhanced in-car multimedia experience.
4.1 Front Panel Controls and Interface
Image: Front view of the car stereo with its main interface and side buttons.
- MIC: Built-in microphone for hands-free calling.
- RST: Reset button (use a thin object to press).
- Power Button: Press to turn on/off or put into standby.
- Home Button: Returns to the main interface.
- Back Button: Navigates back to the previous screen.
- Volume +/-: Adjusts the audio volume.
4.2 Rear Panel and Dimensions
The rear panel includes various ports for power, speakers, external devices, and antennas. Refer to the wiring diagram for detailed connections.
Image: Rear view of the car stereo with port labels and dimensions.
5. Setup and Installation
Proper installation is crucial for the performance and safety of your car stereo. It is recommended to have this unit installed by a qualified professional.
5.1 Wiring Diagram
Follow the wiring diagram carefully to connect the power, speakers, and external components.
Image: Comprehensive wiring diagram for the car stereo connections.
- ACC (Red): Connect to the vehicle's accessory power (switched 12V).
- B+ (Yellow): Connect to the vehicle's constant 12V power supply.
- GND (Black): Connect to the vehicle's chassis ground.
- KEY1/KEY2: Steering wheel control inputs (if applicable).
- BACK (Brown): Connect to the reverse light trigger for automatic camera display.
- Speaker Wires: Connect to corresponding vehicle speakers (FR+, FR-, FL+, FL-, RL+, RL-, RR+, RR-).
- GPS Antenna: Connect to the GPS port on the rear. Position the antenna in a location with a clear view of the sky.
- WiFi Antenna: Connect to the WiFi port for stable internet connection.
- Rear Camera: Connect the camera's video output to the 'VIDEO IN' port and its power to the reverse light circuit.
5.2 Mounting
Secure the 2 DIN unit into your vehicle's dashboard using the provided mounting brackets and screws. Ensure a snug fit and proper ventilation.
6. Operating Instructions
This section details the various functions and features of your ANKEWAY car stereo.
Image: Various user interface screens of the car stereo.
6.1 Basic Operations
- Power On/Off: Press and hold the power button. A short press will put the unit into standby.
- Touchscreen: Navigate the interface by tapping, swiping, and dragging on the 7-inch capacitive touchscreen.
- Volume Control: Use the physical volume buttons or the on-screen controls.
6.2 Radio (FM/RDS)
Access the Radio application from the main menu to listen to FM stations. The RDS (Radio Data System) feature displays station information where available.
Image: Radio interface showing FM tuning and RDS information.
- Search: Tap the 'Search' button to automatically scan and save available stations.
- Manual Tuning: Use the arrow buttons to fine-tune frequencies.
- Presets: Tap and hold a frequency button to save the current station as a preset.
6.3 Bluetooth Connectivity
Connect your smartphone via Bluetooth for hands-free calling and audio streaming.
- Pairing: Go to the Bluetooth settings on the stereo and your phone. Search for available devices and select 'ANKEWAY' to pair.
- Bluetooth Music: Stream audio from your phone to the car stereo. Control playback (play/pause, skip) from the stereo screen.
- Bluetooth Calling: Make and receive calls directly from the stereo. Use the built-in or external microphone for clear communication.
6.4 GPS Navigation
The unit comes with pre-installed navigation software (e.g., Here WeGo) and supports other Android navigation apps.
Image: GPS navigation map display.
- Map Updates: Connect to Wi-Fi to download map updates for your region.
- Route Planning: Enter your destination to get turn-by-turn directions.
6.5 Wi-Fi and Internet
Connect the stereo to a Wi-Fi hotspot (e.g., from your smartphone) to access online features and applications.
Image: Car stereo connected to mobile Wi-Fi, displaying online content.
- Connecting to Wi-Fi: Go to Settings > Network & Internet > Wi-Fi. Select your network and enter the password.
- App Installation: Download and install applications from the Google Play Store.
6.6 Multimedia Playback (Video/Music)
The unit supports various audio and video formats for playback from USB drives or internal storage.
Image: Video playback on the car stereo screen.
- USB Playback: Insert a USB drive into one of the USB ports. Use the 'Music' or 'Video' app to browse and play files.
- Supported Formats: The unit supports common audio (MP3, WMA, AAC, FLAC) and video (MP4, AVI, MKV, MOV) formats.
6.7 Rear Camera Function
When the vehicle is shifted into reverse, the stereo automatically displays the view from the connected rear camera.
- Automatic Display: Ensure the camera is correctly wired to the reverse trigger.
- Parking Lines: The camera provides parking guidelines to assist with maneuvering.
6.8 Sound Settings (Equalizer)
Adjust the audio output to your preference using the built-in equalizer.
- EQ Presets: Select from predefined sound modes like Pop, Rock, Jazz, Classical, or customize your own.
- Fader/Balance: Adjust the sound distribution between front/rear and left/right speakers.
6.9 Mirror-Link (Easy Connection)
Mirror your smartphone screen onto the car stereo display via Wi-Fi or USB for enhanced functionality.
- Android Devices: Connect via USB or Wi-Fi. Follow the on-screen prompts for 'EasyConnection' app.
- iOS Devices: Connect via Wi-Fi.
7. Maintenance
To ensure the longevity and optimal performance of your car stereo, follow these maintenance guidelines:
- Cleaning the Screen: Use a soft, lint-free cloth to gently wipe the touchscreen. Avoid abrasive cleaners or solvents.
- Software Updates: Periodically check for and install system updates to improve performance and add new features.
- Avoid Extreme Temperatures: Do not expose the unit to prolonged direct sunlight or extreme cold, as this can affect its components.
8. Troubleshooting
If you encounter issues with your ANKEWAY car stereo, refer to the following common problems and solutions:
- No Power:
- Check power connections (B+, ACC, GND).
- Verify the vehicle's fuse and the stereo's inline fuse.
- No Sound:
- Check speaker wiring connections.
- Ensure volume is not muted or set too low.
- Verify audio output settings in the system menu.
- Bluetooth Not Connecting:
- Ensure Bluetooth is enabled on both the stereo and your phone.
- Delete previous pairings and attempt to re-pair.
- Restart both devices.
- GPS Signal Lost:
- Ensure the GPS antenna is properly connected and has a clear view of the sky.
- Check GPS settings in the system menu.
- Touchscreen Unresponsive:
- Perform a system reset using the RST button.
- Ensure the screen is clean and free of debris.
9. Specifications
| Feature | Specification |
|---|---|
| Brand | ANKEWAY |
| Model | DC-12V |
| Operating System | Android 10.1 |
| RAM | 2GB |
| Internal Storage | 16GB |
| Screen Size | 7 inches |
| Display Type | Capacitive Touch Screen, 1080P HD |
| Connectivity | Bluetooth, Wi-Fi, USB, Cellular (via hotspot) |
| Radio Tuner | FM, RDS |
| Navigation | GPS (pre-installed maps, supports online maps) |
| Audio Output Power | 4 x 60 Watts |
| Audio Output Mode | Stereo |
| Compatible Devices | Speakers, Rear Camera, Smartphones (for Mirror-Link) |
10. Warranty and Support
ANKEWAY products are designed for reliability and performance. For warranty information, please refer to the documentation provided at the time of purchase or contact your retailer.
For technical support or further assistance, please contact ANKEWAY customer service through the contact information provided on the official website or your purchase platform.
