TouchUpDirect YZ/Z1/M6887 Oxford White Aerosol Essential Kit Instruction Manual

1. Introduction

This manual provides detailed instructions for using the TouchUpDirect YZ/Z1/M6887 Oxford White Aerosol Essential Kit. This kit is designed for repairing minor paint imperfections and scratches on compatible Ford vehicles, ensuring a color-matched finish. Please read all instructions carefully before beginning any repair work.

2. Safety Precautions

Always prioritize safety when working with paint products. Adhere to the following guidelines:

• Ventilation: Use in a well-ventilated area to avoid inhaling fumes. Outdoor use is recommended.
• Personal Protective Equipment: Wear appropriate personal protective equipment, including gloves, eye protection, and a respirator mask, to prevent skin contact and inhalation.
• Flammability: Keep away from heat, sparks, open flames, and hot surfaces. Do not smoke while using.
• Storage: Store in a cool, dry place, out of direct sunlight and away from children and pets.
• Disposal: Dispose of empty cans and waste materials according to local regulations.

3. Kit Contents

The TouchUpDirect Aerosol Essential Kit includes the following components:

• Colorcoat Aerosol Spray Can: Contains the exact match Oxford White paint for your vehicle.
• Clearcoat Aerosol Spray Can: Provides a protective, glossy finish and UV resistance.

Image: The TouchUpDirect Aerosol Essential Kit, featuring one can of Colorcoat and one can of Clearcoat.

Image: Detailed view of the Colorcoat aerosol can, highlighting features such as the rotatable nozzle for smooth fan spray, environmentally friendly paint, color match guarantee, and its suitability for deep and large car paint damage. The product is proudly Made in USA.

4. Identifying Your Vehicle's Paint Code

Before applying paint, ensure you have correctly identified your vehicle's paint color code. This code is typically found on a sticker or plate located in various places on your vehicle, such as:

• Driver's side door jamb
• Glove compartment
• Under the hood (firewall or radiator support)
• Trunk lid underside

For Ford vehicles, the paint code (e.g., YZ/Z1/M6887 for Oxford White) is usually part of the manufacturing label.

Image: A diagram illustrating typical locations for a car paint color code sticker on a Ford vehicle, often found on the driver's side door jamb. The image also highlights the 'Color Match Guarantee'.

5. Application Instructions

Follow these steps for optimal results. It is highly recommended to perform a test application on an inconspicuous area or the provided test card before applying to your vehicle.

5.1. Surface Preparation

1. Clean the Area: Thoroughly wash the repair area with soap and water to remove all dirt, wax, and grease. Dry completely.
2. Remove Loose Paint/Rust: If there is loose paint or rust, gently sand the area with fine-grit sandpaper (e.g., 400-grit) until smooth. Clean off any dust.
3. Masking: Use painter's tape to mask off the surrounding areas you do not wish to paint.

5.2. Paint Application (Colorcoat)

1. Shake Can: Shake the Colorcoat aerosol can vigorously for at least one minute after the mixing ball begins to rattle.
2. Test Spray: Perform a test spray on a piece of cardboard or the provided test card to ensure proper spray pattern and color match.
3. Apply Thin Coats: Hold the can approximately 8-10 inches from the surface. Apply several thin, even coats of Colorcoat, allowing 10-15 minutes of drying time between each coat. Avoid applying thick coats, as this can lead to runs and uneven drying.
4. Coverage: Continue applying coats until the original surface is fully covered and the color is uniform.

5.3. Clearcoat Application

1. Drying Time: Allow the Colorcoat to dry for at least 30-60 minutes (or until dull to the touch) before applying the Clearcoat.
2. Shake Can: Shake the Clearcoat aerosol can vigorously for at least one minute.
3. Apply Thin Coats: Hold the can approximately 8-10 inches from the surface. Apply several thin, even coats of Clearcoat, allowing 10-15 minutes of drying time between each coat. The Clearcoat provides gloss and protection.
4. Finish: Apply 2-3 coats for optimal gloss and durability.

Image: A visual guide illustrating the four key steps for paint repair: 1. Test Color (using a test card), 2. Surface Prep (cleaning with soap and water, sanding if needed), 3. Paint (applying Colorcoat then Clearcoat), and 4. Polish (after Clearcoat has dried).

Image: A side-by-side comparison showing a car bumper with visible scratches before repair and the same area after applying the touch-up paint, demonstrating a significant improvement in appearance.

6. Drying and Curing Times

• Between Colorcoat Layers: 10-15 minutes.
• Before Clearcoat: 30-60 minutes (or until Colorcoat is dull to the touch).
• Between Clearcoat Layers: 10-15 minutes.
• To Touch: Approximately 1-2 hours after final Clearcoat.
• Full Cure: Allow 24-48 hours for the paint to fully cure before washing the vehicle or applying any waxes/polishes. Curing times can vary based on temperature and humidity.

7. Post-Application Care

Once the paint has fully cured, you can maintain the repaired area as you would the rest of your vehicle's paint. Regular washing and waxing will help protect the finish and maintain its appearance.

8. Troubleshooting Common Issues

• Color Doesn't Match: Ensure you have the correct paint code for your vehicle. Always use the test card first. If the color still appears off, contact customer support.
• Paint Runs/Drips: This usually occurs from applying coats too thickly or holding the can too close to the surface. Apply thinner coats and maintain proper distance.
• Uneven Finish: Ensure the surface is properly cleaned and prepped. Apply even, consistent coats.
• Paint Too Thick (Brush Kits): While this is an aerosol kit, if you encounter issues with paint consistency, ensure proper shaking and application technique.

9. Product Specifications

10. Warranty and Support

TouchUpDirect offers a Color Match Guarantee to ensure the paint matches your vehicle's original color. If you experience any issues with color matching or have questions regarding the application process, please contact TouchUpDirect customer support for assistance.

For more information or to view other products, visit the official TouchUpDirect Store.