Bissell 3194
Bissell Little Green Pro Portable Carpet & Upholstery Cleaner
Model: 3194
Introduction
The BISSELL Little Green Pro portable carpet cleaner is designed for powerful spot and stain removal on various soft surfaces. This manual provides essential information for the safe and effective operation and maintenance of your cleaner.

The Bissell Little Green Pro portable carpet and upholstery cleaner, shown with its compact design and attached hose and cleaning tool.
Setup
Before first use, ensure all components are present and familiarize yourself with the cleaner's parts.
1. Filling the Clean Water/Formula Tank
- Remove the clean water tank from the back of the unit by lifting the handle.
- Unscrew the black cap at the bottom of the tank.
- Fill the tank with warm (not boiling) tap water up to the water fill line.
- Add the recommended BISSELL cleaning formula up to the formula fill line. Refer to the formula bottle for specific mixing instructions.
- Replace the black cap securely and place the tank back onto the unit.

The Bissell Little Green Pro cleaner displayed with its various attachments, including the Deep Stain Tool and 3-inch Tough Stain Tool.
2. Attaching Cleaning Tools
- Select the appropriate cleaning tool (Deep Stain Tool or 3" Tough Stain Tool) for your task.
- Attach the desired tool firmly to the end of the flexible hose until it clicks into place.
3. Power Connection
Unwind the power cord and plug the cleaner into a grounded electrical outlet.
Operating
Follow these steps for effective spot and stain cleaning:
1. Pre-treatment (Optional)
For heavily soiled areas or stubborn stains, pre-treat the area with a BISSELL pre-treatment spray according to its instructions. Allow it to sit for a few minutes before cleaning.
2. Cleaning Process
- Turn on the cleaner using the power switch located on the back of the unit.
- Hold the cleaning tool about one inch above the soiled surface. Press the spray trigger to apply cleaning solution.
- While continuing to press the spray trigger, slowly pull the tool over the soiled area.
- Release the spray trigger and slowly pull the tool over the same area to suction up the dirty solution. Repeat this step until no more dirt can be removed.
- For best results, make several passes without pressing the trigger to ensure maximum moisture extraction.

A person demonstrating the use of the Bissell Little Green Pro to clean a carpet, highlighting its portability and ease of use.
3. Cleaning Different Surfaces
- Carpets & Area Rugs: Use the Deep Stain Tool for larger areas or the 3" Tough Stain Tool for concentrated spots.
- Upholstery: Test a small, inconspicuous area for colorfastness before cleaning. Use the 3" Tough Stain Tool for precise cleaning.
- Stairs: The compact design and hose length allow for easy cleaning of carpeted stairs.
- Auto Interiors: Ideal for car seats, floor mats, and other fabric surfaces inside vehicles.

The Bissell Little Green Pro being used to clean carpeted stairs, showcasing its versatility for different surfaces.

A user cleaning the upholstery of a car interior with the Bissell Little Green Pro, demonstrating its effectiveness for auto detailing.
Maintenance
Regular maintenance ensures optimal performance and longevity of your cleaner.
1. Emptying the Dirty Water Tank
- Turn off the cleaner and unplug it from the electrical outlet.
- Remove the dirty water tank from the front of the unit.
- Unlatch the tank lid and carefully pour out the dirty water into a sink or toilet.
- Rinse the dirty water tank and lid thoroughly with clean water.

A close-up view of the Bissell Little Green Pro's cleaning head actively removing a visible stain from a carpet surface.
2. Cleaning Tools and Hose
- Remove the cleaning tool from the hose. Rinse the tool under running water.
- To clean the hose, fill the clean water tank with clean water (no formula). Hold the end of the hose over a sink and press the spray trigger to flush water through the hose.
- Wipe down the exterior of the cleaner with a soft cloth.
3. Storage
Ensure all tanks are empty and clean before storing the cleaner. Wrap the power cord and hose neatly around the designated storage areas on the unit. Store in a dry, protected area.

Trial-size bottles of BISSELL PRO MAX Clean + Protect and Deep Clean formulas, designed for use with the Little Green Pro cleaner.
Troubleshooting
If you encounter issues with your Bissell Little Green Pro, refer to the Troubleshooting Guide (PDF) for detailed solutions. Common issues and quick tips are provided below:
| Problem | Possible Cause | Solution |
|---|---|---|
| No suction | Dirty water tank full or improperly seated; hose/tool clogged. | Empty and re-seat dirty tank; check for and clear clogs in hose/tool. |
| No spray | Clean water tank empty or improperly seated; spray nozzle clogged. | Refill and re-seat clean tank; clean spray nozzle. |
| Poor cleaning performance | Incorrect formula-to-water ratio; worn brush. | Verify correct mixture; consider replacing brush tool. |
Specifications
- Brand: Bissell
- Model Name: SpotClean Pro
- Item Model Number: 3194
- Color: Black/Blue
- Item Weight: 13.25 Pounds
- Product Dimensions: 15.35"D x 11.02"W x 13.98"H
- Capacity: 2.8 Liters
- Power Source: Corded
- Included Components: Deep Stain Tool, 3" Tough Stain Tool, two 8 oz. trial-size Formulas.
Warranty and Support
For detailed warranty information, please refer to the official product documentation included with your purchase or visit the Bissell Store on Amazon. Additional support and a full user manual can be found in the User Manual (PDF).
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.