Introduction
This manual provides essential instructions for the installation, operation, and maintenance of your Essebagno Short Basin Mixer Tap. Please read these instructions carefully before installation and retain them for future reference. This product is designed for use in bathroom basin applications.
Image: Essebagno Short Basin Mixer Tap, showcasing its black body and chrome accents.
Setup and Installation
Proper installation is crucial for the optimal performance and longevity of your mixer tap. We recommend professional installation if you are not familiar with plumbing procedures.
Pre-Installation Steps:
- Flush Water Pipes: Before assembly, thoroughly flush both hot and cold water supply pipes. This prevents dirt and debris from entering and potentially damaging the faucet's internal mechanisms.
- Turn Off Water Supply: Close the main water supply valve before removing any existing faucet.
- Remove Old Faucet: Carefully disconnect and remove your old basin faucet.
- Clean Supply Pipe Threads: Ensure the threads of the main water supply pipes are clean and free of debris.
Installation Steps:
- Mount the Mixer Tap: Install the Essebagno Short Basin Mixer Tap into a 35 mm diameter hole in your sink or countertop.
- Check Spout Length: Verify that the spout length is compatible with your sink to ensure comfortable use and prevent splashing. Refer to the technical drawing for dimensions.
- Connect Water Hoses: Connect the flexible water supply hoses (included) to the hot and cold water lines. Ensure a secure, watertight connection.
- Install Pop-Up Waste: Install the included pop-up waste mechanism into your basin drain hole, following its specific instructions for a proper seal.
- Secure Faucet: Use the included fixing kit to securely fasten the mixer tap to the sink or countertop.
Image: Technical drawing of the Essebagno Short Basin Mixer Tap, showing key dimensions for installation.
Image: Flexible water supply hoses, typically used for connecting the tap to water lines.
Image: A pop-up waste mechanism, included for basin drainage.
Operating Instructions
The Essebagno Short Basin Mixer Tap features a single lever for controlling both water flow and temperature.
- Water Flow Control: Lift the lever upwards to increase water flow. Push it downwards to decrease or stop the flow.
- Temperature Control: Move the lever to the left for hot water and to the right for cold water. Adjust the position between left and right to achieve your desired water temperature.
Image: Close-up of the mixer tap handle, showing the red (hot) and blue (cold) indicators for temperature control.
Maintenance
Regular cleaning and proper care will help maintain the finish and functionality of your Essebagno mixer tap.
- Daily Cleaning: To preserve the faucet's appearance and longevity, clean it daily with a non-abrasive damp cloth or microfiber. Finish by wiping it dry with a microfiber or dry cloth.
- Avoid Harsh Cleaners: Never use solvents, metallic sponges, bleach, acids, strong detergents, aggressive chemical cleaning products, or solvent-based cleaning solutions on the product. These can damage the finish and internal components.
- Aerator Cleaning: Periodically unscrew and clean the aerator at the end of the spout to remove any mineral deposits or debris that may affect water flow.
Troubleshooting
If you encounter any issues with your mixer tap, please refer to the following common solutions:
- Low Water Flow: Check if the aerator is clogged with debris or mineral deposits. Clean or replace it if necessary. Ensure water supply valves are fully open.
- Leaking from Spout: A persistent drip from the spout often indicates a worn-out cartridge. Contact customer support for replacement parts or professional assistance.
- Leaking at Base: Check the connections beneath the sink. Ensure all nuts are tightened securely, but do not overtighten. Inspect seals and gaskets for damage.
- Temperature Control Issues: If the water temperature is inconsistent, ensure both hot and cold water supplies are functioning correctly.
For issues not resolved by these steps, please contact customer support.
Product Specifications
| Feature | Detail |
|---|---|
| Manufacturer | Essebagno |
| Product Dimensions (L x W x H) | 4.8 x 4.8 x 30 cm |
| Weight | 1.72 Kilograms |
| Model Number | 3661109008952 |
| Size | Basin (Low) |
| Color | Black and Chrome |
| Finish | Painted |
| Material | Brass |
| Shape | Square |
| Quantity of Items | 1 |
| Spout Height | 15.4 Centimeters |
| Handle Material | Brass |
| Mounting Type | Deck Mounted |
| Included Components | 1 x Basin Mixer Tap |
| Recommended Uses | Bathroom |
Warranty Information
This Essebagno Short Basin Mixer Tap comes with a manufacturer's warranty of 5 years. Please retain your proof of purchase for warranty claims. The warranty covers manufacturing defects under normal use and service. It does not cover damage resulting from improper installation, misuse, abuse, or the use of harsh cleaning agents.
Customer Support
For further assistance, technical support, or warranty claims, please contact your retailer or the Essebagno customer service department. When contacting support, please have your product model number (Short) and proof of purchase readily available.
ESSEBAGNO
Manufacturer Reference: 3661109008952
Image: The official ESSEBAGNO brand logo.
