INTECHING RC-970R AV Receiver Remote Control User Manual

Introduction

This manual provides comprehensive instructions for the setup, operation, and maintenance of your INTECHING RC-970R AV Receiver Remote Control. This remote is designed as a direct replacement for specific Onkyo AV receiver models, ensuring seamless functionality without the need for complex programming.

Product Overview

The INTECHING RC-970R remote control is engineered to provide full control over your compatible Onkyo AV receiver. Its ergonomic design and clearly labeled buttons facilitate ease of use for various audio and video functions.

Figure 1: Front view of the INTECHING RC-970R remote control, showcasing its button layout and ergonomic shape.

Setup

Battery Installation

The RC-970R remote control requires two AAA batteries (not included) for operation. Follow these steps to install the batteries:

1. Locate the battery compartment on the back of the remote control.
2. Press down on the tab and slide the battery cover downwards to open it.
3. Insert two AAA batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
4. Slide the battery cover back into place until it clicks securely.

Figure 2: Back view of the remote control with the battery compartment open, illustrating the correct orientation for AAA battery insertion.

Compatibility

This remote control is compatible with the following Onkyo AV receiver models:

• Onkyo HT-R398
• Onkyo HT-S3910
• Onkyo TX-SR393

No programming or pairing is required. Once batteries are installed, the remote is ready for use with compatible receivers.

Operating Instructions

Ensure there are no obstructions between the remote control and your AV receiver for optimal performance. Point the remote directly at the receiver's infrared sensor.

Figure 3: Angled view of the remote control, showing the arrangement of input, navigation, and audio adjustment buttons.

Basic Functions

• Power Button (Orange Circle): Turns the AV receiver on or off.
• Input Selectors (BD/DVD, GAME, CBL/SAT, STRAMBOX, PC, AUX, CD, TV, TUNER, BLUETOOTH): Selects the desired audio/video input source.
• Volume Up/Down (VOL): Adjusts the master volume level.
• Mute (✋): Mutes or unmutes the audio output.
• Navigation Pad (Up, Down, Left, Right, ENTER): Used to navigate menus and confirm selections.
• TUNE+/TUNE-: Adjusts radio frequencies or navigates tracks.
• PRESET+/PRESET-: Selects preset radio stations.

Advanced Functions

• ZONE A/B: Controls multi-zone audio output if supported by your receiver.
• SLEEP: Sets a sleep timer for the receiver.
• QUICK MENU: Accesses quick settings or on-screen menus.
• TONE (TREBLE, VOCAL, BASS): Adjusts audio tone settings.
• STEREO: Activates stereo sound mode.
• MOVIE/TV: Selects sound modes optimized for movies or TV.
• MUSIC: Selects sound modes optimized for music.
• DIMMER: Adjusts the brightness of the receiver's display.
• AUDIO SEL: Selects audio input options.
• MEMORY: Stores or recalls settings.
• MODE: Cycles through various operational modes.
• CLEAR: Clears current selections or settings.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the remote control. Avoid using liquid cleaners or abrasive materials, as they may damage the surface or internal components.
• Storage: When not in use for extended periods, store the remote control in a cool, dry place away from direct sunlight and extreme temperatures.
• Battery Replacement: Replace batteries when the remote's response becomes sluggish or inconsistent. Always replace both batteries simultaneously with new ones of the same type (AAA). Remove batteries if the remote will not be used for several months to prevent leakage.

Troubleshooting

• Remote not responding:
  • Check if the batteries are inserted correctly with the correct polarity.
  • Replace old batteries with new AAA batteries.
  • Ensure there are no obstacles between the remote control and the AV receiver.
  • Confirm the remote is pointed directly at the receiver's infrared sensor.
• Specific buttons not working:
  • This may indicate a dirty contact under the button. Try gently pressing the button multiple times. If the issue persists, the remote may require replacement.
• Receiver not turning on/off:
  • Verify the receiver is plugged into a power source and is not in standby mode due to a power outage.
  • Ensure the remote is compatible with your specific Onkyo receiver model.

Specifications

Warranty Information

INTECHING offers a warranty for this product:

• Refund: Available within 30 days from the order date.
• Replacement: Available within 12 months from the order date.

Please retain your proof of purchase for warranty claims.

Support

For further assistance or inquiries regarding your INTECHING RC-970R remote control, please contact the manufacturer, InTeching, through their official support channels or the retailer where the product was purchased.