1. Introduction
Thank you for purchasing the HAHRIR 3-Shelf Over-the-Toilet Bathroom Organizer. This manual provides essential information for the safe assembly, installation, operation, and maintenance of your new storage unit. Please read these instructions carefully before use and retain them for future reference.
Figure 1: HAHRIR 3-Shelf Over-the-Toilet Bathroom Organizer (Black)
2. Product Overview
The HAHRIR 3-Shelf Over-the-Toilet Bathroom Organizer is designed to maximize storage space in compact bathrooms. Its durable metal construction and three-tier design offer practical storage for various bathroom essentials.
- Space-Saving Design: Installs above the toilet, ideal for organizing towels, toilet paper, shampoo, and other bathroom items without occupying floor space.
- Durable Construction: Made from metal steel with an exquisite paint finish, ensuring long-lasting durability and resistance to wet bathroom environments.
- Three-Tier Storage: Features three shelves, each with a height of 9.65 inches and a depth of 6.5 inches, providing ample space for large toiletries.
- Easy Assembly: Designed for straightforward assembly with clear instructions.
- Protective Foot Covers: Includes plastic foot covers to prevent scratches on your floor.
Figure 2: Organizer in use, showcasing storage capacity.
3. Safety Information
Please observe the following safety precautions to ensure safe use and prevent damage to the product or injury.
- Always ensure the shelf is securely installed and assembled according to the instructions.
- Do not overload the shelves, as this could cause the shelf to tip over.
- Keep the shelf away from heat sources and flammable materials.
- Ensure all connections are tightened before placing items on the shelves.
4. Package Contents
Before assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Left Side Frame (1)
- Right Side Frame (1)
- Shelf Panels (3)
- Crossbars (2)
- Plastic Foot Covers (4)
- Assembly Hardware (Screws, Allen Wrench)
- Instruction Manual (1)
5. Assembly Instructions
Follow these steps for proper assembly. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
- Attach Crossbars: Connect the two crossbars to the lower section of the side frames using the provided screws. Ensure they are securely fastened but do not fully tighten yet.
- Install Lower Shelf: Place the lowest shelf panel onto the designated supports on the side frames. Secure it with screws.
- Install Middle and Top Shelves: Repeat the process for the middle and top shelf panels, securing each one firmly.
- Tighten All Screws: Once all shelves and crossbars are in place, fully tighten all screws to ensure stability.
- Attach Foot Covers: Press the plastic foot covers onto the bottom of the side frames.
Tip: For easier assembly, avoid fully tightening screws until all major components are loosely connected. This allows for minor adjustments.
Video 1: Demonstration of the over-the-toilet shelf in a bathroom setting, highlighting its space-saving design and how it fits above a toilet. This video provides a visual reference for the assembled product and its placement.
6. Installation
After assembly, carefully position the organizer over your toilet. Ensure the unit is stable and level. The dimensions are designed to fit most standard toilets.
- Measure your toilet and surrounding space to confirm compatibility before installation. The product dimensions are 19.68" W x 9.45" D x 63.78" H.
- Gently lift the assembled organizer and place it over the toilet tank, ensuring the side frames are positioned on either side of the toilet.
- Push the organizer back against the wall until it is flush and stable.
- Verify that the unit does not interfere with the toilet's operation, including the lid and flush handle.
Figure 3: Detailed dimensions of the organizer, including width, depth, and height, to assist with space planning.
7. Maintenance
Regular cleaning and care will extend the life of your organizer.
- For general cleaning, wipe the surface with a damp cloth.
- For drying, use a dry cloth to prevent water spots and maintain the finish.
- Avoid using abrasive cleaners or harsh chemicals, as these can damage the paint and metal finish.
- Periodically check all screws and connections to ensure they remain tight.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Organizer is wobbly or unstable. | Screws are not fully tightened; uneven floor surface. | Ensure all assembly screws are tightened. Adjust plastic foot covers if possible, or place shims under feet on an uneven floor. |
| Items fall through the shelf grates. | Small items are placed directly on the wire shelves. | Use bins, trays, or containers on the shelves to hold smaller items securely. |
| Difficulty during assembly. | Parts misaligned; screws not fitting properly. | Review the assembly instructions carefully. Do not fully tighten screws until all components are loosely connected. If parts are bent or damaged, contact customer support. |
9. Specifications
| Brand: | HAHRIR |
| Model Number: | 751-BK |
| Material: | Metal |
| Color: | Black |
| Product Dimensions (D x W x H): | 9.45" x 19.68" x 63.78" |
| Shelf Thickness: | 9.65 Inches (height between shelves) |
| Number of Shelves: | 3 |
| Mounting Type: | Standing type (Freestanding) |
| Special Feature: | Rust Proof, Powder Coated Finish |
| Item Weight: | 9 Pounds |
| GTIN/UPC: | 747492151918 |
10. Warranty and Support
For warranty information, product support, or to report missing/damaged parts, please contact HAHRIR customer service directly. Keep your purchase receipt for any warranty claims.
Note: Specific warranty terms may vary. Refer to your purchase documentation or the manufacturer's website for detailed information.