1. Product Overview
The Olimpia Splendid Aura Care Air Purifier is designed to improve indoor air quality by filtering out pollutants and sterilizing the air. It features a multi-stage filtration system including a HEPA 13 filter, activated carbon filter, and a pre-filter, capable of capturing 99.97% of particles down to 0.3 microns. Additionally, it incorporates a UV-C lamp to destroy microorganisms and an ionizer to release negative ions, further enhancing air purification.
This compact and portable unit is equipped with integrated Wi-Fi, allowing control via a dedicated app or common voice assistants. Its intuitive design includes a top handle for easy relocation and a clear control panel for manual adjustments.
Figure 1: Front view of the Olimpia Splendid Aura Care Air Purifier, showcasing its sleek design.
2. Setup Instructions
2.1 Unpacking and Filter Installation
- Carefully remove the air purifier from its packaging.
- Open the filter compartment, typically located at the bottom or side of the unit.
- Remove the plastic packaging from the HEPA 13 and activated carbon filter assembly.
- Insert the filter assembly back into the unit, ensuring it is securely seated.
- Close the filter compartment cover.
Figure 2: View of the air purifier with its multi-layer filter assembly exposed, ready for installation or replacement.
2.2 Placement
Place the air purifier on a flat, stable surface. Ensure there is adequate space (at least 20 cm) around the air inlet and outlet for optimal air circulation. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity.
Figure 3: The air purifier positioned in a room, demonstrating its compact design and portability with the top handle.
2.3 Power Connection
Connect the power cord to the air purifier and then plug it into a standard electrical outlet (100-240V, 50/60Hz).
2.4 Wi-Fi Setup (Optional)
For remote control and smart features, download the dedicated app (e.g., Smart Life or Tuya app) on your smartphone. Follow the in-app instructions to connect the air purifier to your 2.4 GHz Wi-Fi network. This enables control via the app and compatibility with voice assistants like Alexa or Google Home.
3. Operating Instructions
3.1 Control Panel Overview
The control panel is located on the top of the unit and features touch-sensitive buttons and a digital display. Refer to the image below for button identification.
Figure 4: Close-up view of the top control panel with digital display, showing various mode indicators and touch buttons.
- Power Button: Turns the unit on or off.
- Mode Button: Cycles through fan speeds (Low, Medium, High) and operating modes (Auto, Night).
- Timer Button: Sets the operating time (e.g., 2H, 4H, 8H).
- UV/Ionizer Button: Activates or deactivates the UV-C lamp and ionizer functions.
- Wi-Fi Indicator: Shows the status of the Wi-Fi connection.
- Air Quality Indicator: Changes color based on detected air quality (e.g., Blue for optimal, Yellow for medium, Red for low).
3.2 Operating Modes
- Auto Mode: The unit automatically adjusts fan speed based on the detected air quality.
- Night Mode: Operates at the lowest fan speed with reduced display brightness for quiet operation during sleep.
- Manual Fan Speed: Select Low, Medium, or High fan speed manually.
3.3 Wi-Fi and App Control
Once connected to Wi-Fi, you can control all functions of the air purifier through the dedicated smartphone app. This includes power, mode selection, timer settings, UV/ionizer activation, and monitoring air quality remotely. The app also allows integration with compatible voice control systems.
4. Maintenance
4.1 Filter Replacement
The multi-layer filter (HEPA 13 and activated carbon) has an estimated lifespan of 2000 hours. The unit will typically indicate when a filter replacement is due. Replace the filter promptly to maintain optimal performance.
- Unplug the air purifier from the power outlet.
- Open the filter compartment.
- Remove the old filter assembly.
- Dispose of the old filter responsibly.
- Insert a new, genuine Olimpia Splendid filter assembly, ensuring it is correctly oriented and seated.
- Close the filter compartment cover.
- Plug in the unit and reset the filter life indicator (refer to your specific model's instructions for reset procedure, usually by pressing and holding a button).
4.2 Cleaning the Pre-filter
The pre-filter, which captures larger particles, can be cleaned periodically to extend the life of the HEPA filter. It is typically integrated into the main filter assembly or accessible separately.
- Unplug the unit.
- Remove the filter assembly as described above.
- Gently vacuum or brush off accumulated dust from the pre-filter. If washable, rinse with water and ensure it is completely dry before reinstallation.
- Reinstall the filter assembly and close the compartment.
4.3 Exterior Cleaning
Wipe the exterior of the air purifier with a soft, dry cloth. Do not use abrasive cleaners, solvents, or immerse the unit in water.
5. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Unit does not turn on. | No power supply; power cord not connected; unit damaged. | Check power connection and outlet. Ensure power cord is securely plugged in. If still not working, contact support. |
| Poor air purification performance. | Filters are dirty or expired; air inlets/outlets blocked; unit too small for room. | Clean or replace filters. Ensure no obstructions around the unit. Verify room size is within recommended limits (up to 45 m²). |
| Wi-Fi connection fails. | Incorrect Wi-Fi password; unit out of range; router issues; only 5GHz Wi-Fi available. | Ensure correct 2.4 GHz Wi-Fi network and password. Move unit closer to router. Restart router. |
| Unusual noise during operation. | Foreign object inside; fan obstruction; unit not on a stable surface. | Unplug and check for obstructions. Ensure unit is on a stable, level surface. If noise persists, contact support. |
| Air quality indicator always red/yellow. | High level of pollutants; sensor dirty; unit not operating long enough. | Allow unit to operate for an extended period. Ensure filters are clean. Clean the air quality sensor if accessible (refer to specific model instructions). |
6. Technical Specifications
| Feature | Specification |
|---|---|
| Model Number | 99277 |
| Power Absorption | 50W |
| Fan Speeds | 3 |
| Sound Pressure Level (min-max) | 30 - 56 dB(A) |
| Recommended Room Size | Up to 45 m² |
| CADR (Clean Air Delivery Rate) | 400 m³/h |
| Ozone Production | <0.05 ppm |
| Power Supply | 100/240V, 1-phase, 50/60Hz |
| Filter Type | HEPA 13, Activated Carbon, Pre-filter |
| UV Lamp | Yes |
| Ionizer | Yes |
| Connectivity | Integrated Wi-Fi (2.4 GHz) |
| Dimensions (L x W x H) | 30.3 x 27.3 x 53.4 cm |
| Weight | 5 kg |
7. Warranty and Support
Olimpia Splendid products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Olimpia Splendid website. Keep your proof of purchase for warranty claims.
For technical assistance, troubleshooting beyond this manual, or to purchase replacement parts and filters, please contact Olimpia Splendid customer support. Contact information can typically be found on their official website or in the product packaging.
Important: Do not attempt to repair the unit yourself. Unauthorized repairs may void your warranty and pose safety risks.
