Introduction
The THOVAS L100-2P is a versatile 3-in-1 emergency LED flashlight designed for home use. It functions as a power failure light, a night light, and a portable handheld flashlight. This device is engineered to provide illumination automatically during power outages and offers convenient lighting solutions for various situations.

Image: The THOVAS L100-2P 3-in-1 Emergency LED Flashlight in use, highlighting its multiple functions.
Product Features
- Multi-Function Design: Combines an emergency flashlight, power failure light, and night light.
- Automatic Power Failure Activation: The flashlight automatically turns on when power is lost, providing immediate illumination.
- Smart Night Light: Features a light sensor that automatically activates the night light at dusk or when the room darkens.
- Rechargeable Handheld Flashlight: Easily detaches from the charging base for portable use.
- 90° Rotating AC Plug: Allows for flexible positioning in various wall outlets.
- Long Runtime: Provides up to 7 hours of illumination on a single charge.
Package Contents
Ensure all items are present upon unboxing:
- THOVAS L100-2P Emergency LED Flashlight (2 units)
- Integrated Lithium-Ion Battery (pre-installed in each unit)
- User Manual (this document)
Setup
- Unpack the Device: Carefully remove the flashlight and its charging base from the packaging.
- Adjust the AC Plug: The AC plug can rotate 90 degrees to accommodate different outlet orientations. Gently rotate the plug to the desired position before inserting it into a wall outlet.

Image: The rotating AC plug allows for flexible installation in various outlets.
- Plug into an Outlet: Insert the device into a standard 120V AC wall outlet. Ensure it is securely plugged in. The device will begin charging automatically.
- Initial Charge: For optimal performance, allow the flashlight to charge for at least 12 hours before first use.
Operating Modes
The THOVAS L100-2P features a slide switch on the side to select between different operating modes:
- ON Mode: Slide the switch to "ON". The flashlight will turn on continuously. This mode is primarily for handheld use when detached from the base.
- OFF Mode: Slide the switch to "OFF". The flashlight will remain off.
- AUTO Mode (Default for plugged-in use): Slide the switch to "AUTO". In this mode, the device functions as both a night light and an emergency power failure light.
- Night Light Function: The warm night light at the base of the unit will automatically turn on when the ambient light in the room darkens and turn off when sufficient light is detected.
- Emergency Power Failure Function: If the power supply to the outlet is interrupted (e.g., during a blackout), the main LED flashlight will automatically illuminate, providing emergency lighting.

Image: Auto Mode operation, demonstrating night light activation in darkness and flashlight activation during power failure.

Image: The LED power failure light automatically activates during a power outage.
- Handheld Flashlight Use: To use as a portable flashlight, simply lift the unit from its charging base. If the switch is in "AUTO" mode, the flashlight will automatically turn on. You can also slide the switch to "ON" for continuous light.

Image: The rechargeable handheld flashlight detaches from the induction charging base for portable use.
Charging
The THOVAS L100-2P charges automatically when plugged into a live wall outlet. The unit uses an induction charging base. Ensure the flashlight is properly seated on the base for continuous charging. A full charge provides approximately 7 hours of flashlight use.
Video: Demonstration of the THOVAS L100-2P power failure light, showing its automatic activation and use as a flashlight.
Maintenance
- Cleaning: Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or immerse the unit in water.
- Battery Care: The integrated Lithium-Ion battery is designed for long life. To maintain battery health, keep the unit plugged in when not in use. Avoid fully discharging the battery frequently.
- Storage: If storing the device for an extended period, ensure it is fully charged and store it in a cool, dry place. Recharge every 3-6 months to prevent deep discharge.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Flashlight does not turn on during power failure. | Switch not in "AUTO" mode; unit not charged; faulty outlet. | Ensure switch is in "AUTO". Confirm unit is fully charged. Test the outlet with another device. |
| Night light does not turn on in darkness. | Switch not in "AUTO" mode; ambient light too bright. | Verify switch is in "AUTO". Ensure the room is sufficiently dark for the light sensor to activate. |
| Flashlight does not charge. | Unit not properly seated on base; faulty outlet; internal issue. | Reseat the flashlight firmly on the charging base. Test the outlet. If problem persists, contact customer support. |
| Flashlight runtime is shorter than expected. | Battery not fully charged; aging battery. | Ensure the unit is fully charged (12+ hours). Battery capacity may decrease over time. |
Specifications
- Model: L100-2P
- Power Source: 120 Volts AC (for charging), Battery Powered (for use)
- Battery Type: 1 Lithium Ion battery (included)
- Light Source: LED (Light Emitting Diode)
- Features: Multi-mode, Automatic, Energy-saving
- Material: Plastic
- Item Weight: Approximately 10 ounces
- Package Dimensions: Approximately 5 x 4.8 x 4.09 inches
- Water Resistance Level: Not Water Resistant
Safety Information
- Do not disassemble or modify the device.
- Keep away from water and high humidity. This device is not water resistant.
- Do not expose to extreme temperatures or direct sunlight for prolonged periods.
- Keep out of reach of children.
- Use only with standard 120V AC outlets.
- If the device is damaged, discontinue use immediately and contact customer support.
Warranty and Support
For warranty information or technical support, please refer to the contact details provided on the product packaging or visit the official THOVAS website. Please have your model number (L100-2P) and purchase date available when contacting support.





