FORMIZON Graduation Candy Boxes Instruction Manual

Introduction

This manual provides instructions for the assembly and use of the FORMIZON Graduation Candy Boxes. These boxes are designed for packaging small treats, gifts, or party favors, particularly for graduation-themed events. Each set includes 25 individual candy boxes, complete with graduation cap tops and tassels, along with double-sided tape for assembly.

Product Components

Each package of FORMIZON Graduation Candy Boxes contains the following items:

• 25 x Graduation Candy Box bases (unassembled cardboard)
• 25 x Graduation Cap tops (unassembled cardboard)
• 25 x Yellow Tassels
• 1 x Roll of Double-Sided Tape

Specifications

Key dimensions and material information for the graduation candy boxes:

Setup and Assembly

The graduation candy boxes require simple manual assembly. Follow these steps to construct each box:

1. Prepare the Box Base: Fold along all pre-creased lines of the box base to form the cube shape. Ensure all flaps are properly aligned.
2. Secure the Box Base: Use the provided double-sided tape to secure the side flap of the box base, forming a sturdy cube. Press firmly to ensure adhesion.
3. Prepare the Cap Top: Take one graduation cap top piece. Identify the small circular hole in the center.
4. Attach the Tassel: Insert the small plastic button (part of the tassel assembly) through the circular hole in the center of the cap top. Secure it from the underside of the cap.
5. Attach Cap to Box: Apply double-sided tape to the top edges of the assembled box base. Carefully align and press the assembled cap top onto the box base, ensuring the cap's square top is centered.
6. Finalize Assembly: Ensure all parts are securely attached. The box is now ready to be filled.

Operating and Usage

Once assembled, the FORMIZON Graduation Candy Boxes can be used to hold various small items. The top lid of the box opens to allow for easy filling and access.

• Filling the Box: Open the top flap of the assembled box. Place small candies, chocolates, cookies, small toys, or other party favors inside.
• Closing the Box: Close the top flap, ensuring it tucks securely into the box. The graduation cap design will sit neatly on top.
• Display and Distribution: Arrange the filled boxes as part of your graduation party decor, or distribute them as gifts to guests, graduates, or teachers.

Maintenance

These candy boxes are made of cardboard and are intended for single or limited use. To maintain their appearance:

• Storage: Store unassembled boxes in a dry, cool place away from direct sunlight to prevent warping or fading.
• Cleaning: Avoid contact with liquids. If necessary, gently wipe with a dry, soft cloth. Do not use water or cleaning solutions.
• Handling: Handle with care to prevent creasing or tearing of the cardboard.

Troubleshooting

If you encounter any issues during assembly or use, consider the following common solutions:

• Box Not Forming Correctly: Ensure all pre-creased lines are folded sharply. Sometimes, gently bending the cardboard against the crease helps.
• Tape Not Sticking: Ensure surfaces are clean and dry before applying tape. Press firmly for several seconds after application. If the provided tape is insufficient, a stronger double-sided adhesive can be used.
• Tassel Detaching: Ensure the plastic button of the tassel is fully inserted and secured through the cap's hole.
• Cap Not Centered: Before pressing down firmly, gently adjust the cap's position on the box base to ensure it is centered.

Safety Information

Please observe the following safety guidelines:

• Small Parts Warning: The product contains small parts (tassels, tape pieces) which may pose a choking hazard. Keep away from young children, especially those under 3 years of age.
• Material Safety: The boxes are made of cardboard. Do not expose to open flames or excessive heat.