Product Overview
The Greenworks 2000 PSI Electric Pressure Washer is designed for heavy-duty household cleaning tasks. It delivers up to 2000 PSI (Pounds per Square Inch) and 1.1 GPM (Gallons Per Minute) of cleaning power, effectively removing dirt, grime, and debris from various surfaces. Its compact design and integrated wheels allow for easy maneuverability. This unit includes a 20-foot high-pressure hose and a 35-foot power cord for extended reach.
This pressure washer is PWMA (Pressure Washer Manufacturers’ Association) certified, ensuring that its performance claims for water pressure and flow rate are tested, verified, and certified by an independent laboratory.
Figure 1: Greenworks 2000 PSI Electric Pressure Washer with included accessories.
Safety Information
Always read and understand all safety warnings and instructions before operating the pressure washer. Failure to follow these warnings may result in serious injury or property damage.
- Electrical Safety: Ensure the pressure washer is connected to a grounded outlet protected by a Ground Fault Circuit Interrupter (GFCI). The unit comes with an inline GFCI on the power cord. Do not bypass or modify the GFCI.
- Water Connection: Always connect the pressure washer to a cold water supply. Do not use hot water. Ensure the water supply is clean and free of debris to prevent damage to the pump.
- High Pressure Hazard: The pressure washer produces a powerful stream of water. Never direct the spray at people, pets, electrical devices, or the unit itself. Keep hands, face, and feet clear of the nozzle.
- Personal Protective Equipment: Wear appropriate eye protection (safety glasses or goggles) and protective clothing when operating the pressure washer.
- Stability: Operate the pressure washer on a stable, level surface to prevent tipping.
- Children and Bystanders: Keep children and bystanders away from the operating area.
Components and Assembly
Familiarize yourself with the parts of your Greenworks pressure washer before assembly and operation.
Figure 2: Key components of the Greenworks 2000 PSI Electric Pressure Washer.
Assembly Steps:
- Handle Assembly: Attach the handle to the main unit using the provided hardware. Ensure it is securely fastened.
- Wheel Attachment: The wheels are pre-mounted for convenience.
- High-Pressure Hose Connection: Connect one end of the 20-foot high-pressure hose to the pressure washer's M22 outlet and the other end to the spray gun. Ensure connections are tight to prevent leaks.
- Garden Hose Connection: Connect your garden hose to the water inlet on the pressure washer. Ensure the water inlet filter is clean and properly seated.
- Nozzle Attachment: Select the desired quick-connect nozzle and insert it into the spray wand until it clicks into place.
Figure 3: Details of the rotary switch, M22 outlet, pro-style wand, and 1/4" quick connect for nozzles.
Operating Instructions
Before Starting:
- Ensure all connections are secure.
- Turn on the water supply completely.
- Squeeze the trigger on the spray gun to purge air from the system until a steady stream of water emerges.
Starting the Unit:
- Plug the 35-foot power cord into a grounded GFCI outlet.
- Turn the rotary switch on the pressure washer to the "ON" position. The motor will start when the spray gun trigger is squeezed and stop when released.
Using Nozzles:
The Greenworks pressure washer includes three quick-connect nozzles for various cleaning tasks:
- 25° Nozzle (Green): Provides a medium-angle, high-pressure spray. Ideal for general cleaning of fences, patios, and driveways.
Figure 4: Application of the 25° nozzle for medium-angle, high-pressure cleaning.
- 40° Nozzle (White): Delivers a wide-angle, medium-pressure spray. Suitable for delicate surfaces, car washing, and general rinsing.
Figure 5: Application of the 40° nozzle for wide-angle, medium-pressure cleaning.
- Soap Nozzle (Black): Used for applying detergent. This nozzle operates at a lower pressure to allow for effective soap application.
Figure 6: Application of the soap nozzle for detergent application.
Figure 7: The three quick connect nozzles included with the pressure washer.
Detergent Application:
The pressure washer features a soap siphon hose that allows for the use of cleaning detergents. Ensure you use pressure washer safe detergents. Follow the detergent manufacturer's instructions for dilution.
- Place the end of the soap siphon hose into a container of pre-diluted pressure washer detergent.
- Attach the black soap nozzle to the spray wand.
- Start the pressure washer and apply detergent to the surface. Allow the detergent to soak for a few minutes (refer to detergent instructions), then switch to a high-pressure nozzle (25° or 40°) to rinse thoroughly.
Figure 8: The soap applicator siphons pre-diluted soap from household containers.
Shutting Down:
- Turn the pressure washer switch to the "OFF" position.
- Turn off the water supply.
- Squeeze the spray gun trigger to release any remaining pressure in the system.
- Disconnect the garden hose and high-pressure hose.
Official Product Video:
Video 1: Greenworks 1900 PSI Portable Pressure Washer, 1.2 GPM. This video demonstrates the portability and general operation of a Greenworks pressure washer, similar to the 2000 PSI model.
Maintenance
Regular maintenance ensures optimal performance and extends the life of your pressure washer.
- Nozzle Cleaning: If a nozzle becomes clogged, use the included nozzle cleaning tool to clear any debris.
- Water Inlet Filter: Regularly inspect and clean the water inlet filter to prevent debris from entering the pump.
- Hose and Cord Care: Coil the high-pressure hose and power cord neatly after each use to prevent kinks and damage.
Figure 9: Proper storage of the 20-foot high pressure hose.
- Winterization (for cold climates): If storing the pressure washer in an area where temperatures may drop below freezing, it is crucial to winterize the unit to prevent damage.
- Disconnect all hoses.
- Pour pressure washer pump protector (available at hardware stores) into the water inlet.
- Briefly turn on the unit (1-2 seconds) until the protector solution exits the high-pressure outlet.
- Store the unit in a dry, protected area.
Troubleshooting
Refer to the table below for common issues and their solutions.
Specifications
- Model Number: GPW2000-1RG
- Power Source: AC Corded Electric
- Maximum Pressure: 2000 PSI
- Maximum Flow Rate: 1.1 GPM
- Motor: 13 Amp
- Hose Length: 20 Feet (High Pressure)
- Power Cord Length: 35 Feet with inline GFCI
- Item Weight: 30.2 Pounds
- Product Dimensions: 20.77"L x 20.08"W x 35.83"H
- Certification: PWMA Certified
Figure 10: Performance specifications of the Greenworks 2000 PSI Electric Pressure Washer.
Warranty and Support
Greenworks products are built to last. This pressure washer comes with a 3-Year Tool & Battery Warranty (as indicated by product imagery, please refer to official Greenworks warranty documentation for full details and terms). For technical support, parts, or warranty claims, please contact Greenworks customer service. Contact information can typically be found on the Greenworks official website or on the product packaging.
For more information and support, visit the official Greenworks website: www.greenworkstools.com