CorLiving Bellevue King Panel Bed Instruction Manual

1. Introduction

This manual provides detailed instructions for the assembly, operation, maintenance, and troubleshooting of your CorLiving Bellevue King Panel Bed. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

This image shows the CorLiving Bellevue King Panel Bed fully assembled with a mattress and bedding, demonstrating its appearance in a bedroom environment.

2. Safety Information

• Always assemble the bed on a soft, clean surface to prevent damage to the product.
• Ensure all bolts and screws are securely tightened before using the bed. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight capacity of 598 pounds (272 kg).
• Keep small parts away from children during assembly to prevent choking hazards.
• Use only the parts provided by the manufacturer. Substituting parts may compromise safety and void the warranty.
• This product is intended for indoor use only.

3. Package Contents

Verify that all components are present before beginning assembly. The CorLiving Bellevue King Panel Bed is shipped in one box.

• Headboard
• Side Rails
• Footboard
• Wooden Slats
• Center Support Legs (Adjustable)
• Hardware Pack (bolts, washers, Allen key)

4. Assembly Instructions

Assembly requires two adults. Please follow these general steps. Specific diagrams may be included with your product packaging.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches.
2. Attach Side Rails to Headboard: Align the side rails with the pre-drilled holes on the headboard. Secure them using the provided bolts and washers. Do not fully tighten yet.
3. Attach Side Rails to Footboard: Connect the other end of the side rails to the footboard, aligning holes and securing with bolts and washers. Hand-tighten all connections.
4. Install Center Support Legs: Attach the adjustable center support legs to the designated crossbeams or frame sections. Adjust their height to ensure they firmly touch the floor once the bed is in its final position.
5. Place Wooden Slats: Distribute the wooden slats evenly across the bed frame. Secure them to the side rails using the provided fasteners or by inserting them into the pre-fitted plastic caps.
6. Final Tightening: Once all components are in place and aligned, fully tighten all bolts and screws using the Allen key.

This image displays the bed frame from the front, highlighting the integrated wooden slat system designed to support a mattress without the need for a box spring.

An angled perspective of the bed frame, illustrating the robust wooden slats and the overall structure that provides mattress support.

This image provides a close-up of the durable engineered wood slats and the central adjustable support legs, which contribute to the bed's stability.

5. Usage Guidelines

• The CorLiving Bellevue King Panel Bed is designed to fit most standard King size mattresses.
• Due to the durable engineered wood slats, a box spring is not required. Place your mattress directly on the slats.
• Ensure the bed is placed on a level surface to maintain stability and prevent undue stress on the frame.

6. Care and Maintenance

Proper care will extend the life and appearance of your bed.

• Fabric Care: For general cleaning, vacuum the fabric upholstery regularly using an upholstery attachment to remove dust and debris. For spills, blot immediately with a clean, dry cloth. Do not rub. For stubborn stains, consult a professional upholstery cleaner.
• Frame Care: Wipe the wooden legs and exposed frame parts with a soft, damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Hardware Check: Periodically check all bolts and screws to ensure they remain tight. Re-tighten as needed to maintain structural integrity.

A detailed view of the dark gray fabric, showing its weave and texture, which covers the headboard and bed frame.

A detailed shot of an upholstered corner, illustrating the quality of the fabric and stitching.

7. Troubleshooting

• Bed Squeaks: Ensure all bolts and screws are fully tightened. Check that the center support legs are properly adjusted and firmly touching the floor. Verify that the wooden slats are correctly seated and not rubbing against each other or the frame.
• Bed Feels Unstable: Confirm that the bed is on a level surface. Re-check all hardware connections for tightness. Ensure the adjustable support legs are making firm contact with the floor.
• Parts Missing or Damaged: If you discover any missing or damaged parts upon unpacking, do not proceed with assembly. Contact customer support immediately for assistance.

8. Specifications

This diagram provides detailed measurements of the bed frame, including length, width, height of the headboard, and frame height, crucial for space planning and assembly.

9. Warranty Information

The CorLiving Bellevue King Panel Bed is covered by an 180-Day Limited Manufacturer's Warranty. This warranty covers manufacturing defects under normal use. Please retain your proof of purchase for warranty claims. For full details regarding warranty coverage and limitations, please refer to the official CorLiving warranty documentation or contact customer support.

10. Customer Support

For assistance with assembly, missing parts, or any other inquiries regarding your CorLiving Bellevue King Panel Bed, please contact CorLiving Customer Support. Refer to the contact information provided in your product packaging or visit the official CorLiving website for support options.

You can also visit the CorLiving Store on Amazon for more information.