Uni Pro Skid Steer Seat Instruction Manual

1. Introduction

The Uni Pro Bucket Seat is engineered as a robust and comfortable replacement seating solution. It is specifically designed for use in various heavy-duty applications, including skid steers, small construction equipment, forklifts, industrial machinery, and turf equipment. This seat aims to provide enhanced operator comfort during extended periods of work across diverse and challenging terrains.

2. Safety Information

Always prioritize safety during installation and operation. Read all instructions thoroughly before beginning. Ensure the equipment is turned off and secured before performing any installation or maintenance. Use appropriate personal protective equipment (PPE) such as gloves and eye protection. If you are unsure about any step, consult a qualified professional.

• Verify compatibility with your specific equipment model before installation.
• Ensure all mounting hardware is securely fastened.
• Do not modify the seat or its components, as this may compromise safety and performance.
• Keep hands and clothing clear of moving parts during installation and adjustment.

3. Product Overview

Features:

• Heavy-duty vinyl covering for durability.
• Black in color to match various equipment interiors.
• Durable blow-molded plastic frame, corrosion resistant.
• Foam cushions designed for optimal operator comfort.
• Vacuum-formed waterproof vinyl for protection against elements.
• Central drain hole to prevent water accumulation.
• Pre-attached slide rails with 6 inches of travel for adjustment.
• Designed to accept two flange-mount operator presence switches.

Product Images:

4. Setup and Installation

Compatibility:

This seat is compatible with various New Holland skid steer models, including: LS120, LS125, LS140, LS150, LS160, LS170, LS180, LS180.B, LS185.B, LS190, LS190.B, LT185.B, LT190.B.

Important: The seat will NOT work if your equipment currently has a suspension installed. This seat is designed for direct mounting applications.

Mounting Pattern:

The seat features a standard mounting pattern of 11.25 inches (W) x 11 inches (L). It is crucial to CHECK YOUR EXISTING MOUNTING PATTERN before ordering and attempting installation to ensure proper fit.

Installation Steps:

1. Prepare Equipment: Ensure the skid steer or equipment is turned off, parked on a level surface, and the parking brake is engaged. Remove the key from the ignition.
2. Remove Old Seat: Carefully unbolt and remove the existing seat from the equipment. Note the location of any wiring for operator presence switches.
3. Inspect Mounting Area: Clean the mounting surface and inspect for any damage or obstructions.
4. Position New Seat: Align the Uni Pro seat's pre-attached slide rails with the mounting holes on your equipment.
5. Secure Seat: Insert and hand-tighten appropriate bolts (not included, typically re-use existing) through the mounting holes. Ensure the seat is properly aligned before fully tightening all bolts.
6. Connect Operator Presence Switches (if applicable): If your equipment uses operator presence switches, connect them to the designated flange mounts on the new seat.
7. Test Functionality: After installation, gently test the seat's stability and ensure all connections are secure. Verify the proper function of any connected operator presence switches before operating the equipment.

5. Operation

Once installed, the Uni Pro seat provides a stable and comfortable platform for operating your equipment. The integrated slide rails allow for 6 inches of fore and aft adjustment to accommodate different operator preferences and ensure optimal reach to controls. To adjust the seat position, locate the adjustment lever (typically on the side or front of the slide rails), lift or push it, and slide the seat to the desired position. Release the lever to lock the seat in place.

6. Maintenance

Regular maintenance will extend the life and appearance of your Uni Pro seat.

• Cleaning: Wipe down the vinyl covering with a damp cloth and mild soap as needed. Avoid harsh chemicals or abrasive cleaners, which can damage the vinyl.
• Inspection: Periodically check all mounting bolts and hardware for tightness. Re-tighten if necessary. Inspect the vinyl for any tears or punctures and address them promptly to prevent further damage.
• Drain Hole: Ensure the central drain hole remains clear of debris to prevent water build-up.

7. Troubleshooting

Seat Does Not Fit / Install Correctly:

• Suspension Interference: This seat is designed for direct mounting and will not work if your equipment has an existing suspension system. Verify your equipment's current seat mounting type.
• Incorrect Mounting Pattern: Double-check the mounting pattern of your equipment against the seat's 11.25" x 11" (W x L) pattern. Discrepancies in mounting hole alignment will prevent proper installation.
• Obstructed Mounting Area: Ensure there are no cables, hoses, or other obstructions preventing the seat from sitting flush on the mounting surface.

Operator Presence Switch Issues:

• Improper Connection: Ensure the operator presence switches are correctly connected to the flange mounts on the seat and that wiring is secure.
• Switch Malfunction: If the equipment is not recognizing the operator's presence, the switches themselves may be faulty or require adjustment. Consult your equipment's service manual.

8. Specifications

9. Warranty Information

For specific warranty details regarding your Uni Pro Skid Steer Seat, please refer to the warranty card included with your purchase or contact the manufacturer directly. Typically, products are covered against defects in materials and workmanship for a specified period from the date of purchase. Keep your proof of purchase for any warranty claims.

10. Customer Support

If you have any questions, require technical assistance, or need to report an issue with your Uni Pro Skid Steer Seat, please contact the retailer or manufacturer's customer support. Have your product model number (S756334AB) and purchase details ready when contacting support for faster service.

For general inquiries, you may visit the Uni Pro brand website or the platform where the product was purchased for contact information.