VOYZ VZ-WS5 Wall Mount Speaker Stand Instruction Manual

1. Introduction

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your VOYZ VZ-WS5 Wall Mount Speaker Stand. This heavy-duty speaker mount is designed for PA systems, featuring solid steel construction and a 90-30 degree tilt adjustment, capable of supporting speakers up to 80 lbs. Please read this manual thoroughly before installation and retain it for future reference.

2. Safety Information

• Weight Capacity: Do not exceed the maximum weight capacity of 80 lbs (36.2 kg) per stand. Overloading can cause instability and potential damage or injury.
• Wall Structure: Ensure the mounting surface (wall) is structurally sound and capable of supporting the combined weight of the speaker stand and the speaker. Consult a qualified professional if unsure about wall integrity.
• Installation: Always use appropriate tools and follow all installation steps carefully. Improper installation can lead to the stand detaching from the wall.
• Hardware: Use only the provided mounting hardware or suitable alternatives recommended for your specific wall type.
• Adjustments: Ensure all adjustment knobs and bolts are securely tightened after positioning the speaker to prevent accidental movement.
• Children and Pets: Keep children and pets away from the installation area during setup.

3. Package Contents

Verify that all components are present before beginning installation:

• 2 x VOYZ VZ-WS5 Wall Mount Speaker Stands
• Mounting Hardware (screws and wall anchors)

Image: Included mounting hardware, consisting of several black hex-head screws and grey plastic wall anchors.

4. Setup and Installation

Follow these steps to securely install your VOYZ VZ-WS5 Wall Mount Speaker Stand:

1. Select Mounting Location: Choose a suitable wall location that can support the weight of the stand and speaker. Ensure there are no electrical wires or plumbing behind the drilling points.
2. Mark Drilling Points: Hold the wall plate of the speaker stand against the wall at the desired height and position. Use a pencil to mark the locations for the mounting holes. Ensure the marks are level.
3. Drill Pilot Holes: Using an appropriate drill bit for your wall type and the provided anchors/screws, drill pilot holes at the marked locations.
4. Insert Wall Anchors (if needed): If mounting into drywall or hollow walls, insert the plastic wall anchors into the pilot holes until flush with the wall surface.
5. Mount the Bracket: Align the wall plate of the speaker stand with the drilled holes. Insert the mounting screws through the bracket and into the wall/anchors. Tighten all screws firmly until the bracket is secure against the wall. Do not overtighten.

Image: Front view of the VOYZ VZ-WS5 speaker wall mount, showing the wall plate on the right and the speaker pole on the left.

6. Attach Speaker: Carefully lift your PA speaker and place its mounting pole receptacle onto the pole of the VOYZ VZ-WS5 stand. Ensure the speaker is fully seated and stable.
7. Adjust Speaker Position: Loosen the adjustment knob(s) on the stand to achieve the desired tilt and rotation for your speaker. The stand allows for 90-30 degree tilt adjustment.
8. Secure Adjustments: Once the speaker is in the desired position, firmly tighten all adjustment knobs and bolts to lock the speaker in place.

Image: A PA speaker securely mounted on the VOYZ wall mount stand, demonstrating its use in a room setting.

5. Operating Instructions

The VOYZ VZ-WS5 speaker stand offers adjustable positioning for optimal sound projection:

• Tilt Adjustment: The stand features a 90-30 degree tilt adjustment. To adjust, loosen the large knob located on the underside of the main arm. Tilt the speaker to the desired angle, then re-tighten the knob firmly.
• Rotation Adjustment: The speaker pole can be rotated. Loosen the smaller bolts on the side of the pole housing to rotate the speaker horizontally. Tighten the bolts once the desired rotation is achieved.

Image: A close-up view of the adjustment mechanism, showing the knob for tilt and bolts for rotation.

6. Maintenance

Regular maintenance ensures the longevity and safe operation of your speaker stand:

• Cleaning: Wipe the stand with a soft, dry cloth to remove dust. For stubborn dirt, use a slightly damp cloth and mild detergent, then dry thoroughly. Avoid abrasive cleaners.
• Fastener Check: Periodically check all mounting screws and adjustment knobs/bolts to ensure they remain tight. Re-tighten if any looseness is detected.
• Inspection: Inspect the stand for any signs of wear, damage, or corrosion. If any damage is found, discontinue use and contact VOYZ support.

7. Troubleshooting

• Stand feels loose on the wall:
  • Ensure all mounting screws are fully tightened.
  • Verify that the wall structure is adequate for the weight. If mounting into drywall, ensure anchors are properly installed and not stripped.
• Speaker is difficult to adjust or slips:
  • Loosen adjustment knobs/bolts sufficiently before attempting to reposition the speaker.
  • Ensure adjustment knobs/bolts are firmly tightened after positioning to prevent slippage.
  • Check for any obstructions or debris in the adjustment mechanisms.
• Speaker pole does not fit into the stand:
  • Verify that your speaker's pole receptacle diameter is compatible with the stand's pole.
  • Ensure there is no damage or deformation to either the speaker pole or the stand's receptacle.

8. Specifications

9. Warranty and Support

For warranty information or technical support regarding your VOYZ VZ-WS5 Wall Mount Speaker Stand, please contact VOYZ customer service directly. Refer to the product packaging or the official VOYZ website for contact details.