Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your Ashley Harbour Nilson 5-Light Chandelier. Please read all instructions carefully before beginning installation and retain this manual for future reference.
The Nilson chandelier features a matte black finish with gently curving arms and an open silhouette. It is designed for indoor use and is compatible with candelabra bulbs (not included). Its design complements transitional, classic, minimalist, and traditional settings.
Image 1: The Nilson 5-Light Chandelier in matte black, showcasing its open silhouette and five candle-style light bases.
Image 2: The Nilson Chandelier installed in a bedroom, demonstrating its aesthetic appeal in a living space.
Safety Information
WARNING: To avoid electric shock, ensure power is turned off at the circuit breaker before installation or servicing. All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Consult a qualified electrician if you are unfamiliar with proper electrical wiring connections.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
- Do not exceed the recommended wattage for bulbs. Use only bulbs of the specified type and wattage.
- Ensure the fixture is securely mounted to a structural component of the ceiling.
- Do not connect the fixture to an ungrounded electrical system.
- Handle glass components with care to prevent breakage.
Package Contents
Before beginning installation, ensure all parts are present and accounted for. If any parts are missing or damaged, do not attempt to assemble or install the fixture. Contact customer service for assistance.
The package includes:
- Chandelier Body
- Canopy
- Chain/Rod Assembly
- Mounting Bracket
- Wire Nuts
- Ground Screw
- Instruction Manual
- Required Hardware (screws, washers, etc.)
Setup and Installation
Tools Required: Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, safety glasses, ladder.
- Turn Off Power: Locate the circuit breaker that supplies power to the light fixture outlet box. Turn the breaker to the OFF position. Verify power is off using a voltage tester.
- Prepare Mounting: Attach the mounting bracket to the outlet box using the provided screws. Ensure the bracket is securely fastened.
- Adjust Height: The chandelier's height is adjustable from 33 inches to 81 inches. Determine the desired hanging height and adjust the chain/rod length accordingly. The fixture is compatible with sloped ceilings.
- Wiring: Connect the fixture's black wire to the house's black (hot) wire, the fixture's white wire to the house's white (neutral) wire, and the fixture's ground wire to the house's ground wire (or ground screw on the mounting bracket). Secure connections with wire nuts and electrical tape.
- Mount Fixture: Carefully lift the chandelier and secure the canopy to the mounting bracket, ensuring all wires are tucked safely inside the outlet box.
- Install Bulbs: Insert five candelabra-base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
- Restore Power: Turn the circuit breaker back to the ON position.
Image 3: Dimensional drawing of the Nilson Chandelier, indicating a 25-inch diameter, 28.25-inch fixture height, and an adjustable hanging height from 33 to 81 inches.
Image 4: Close-up view of the chandelier's five candelabra-style light sockets, ready for bulb installation.
Operating Instructions
The Nilson chandelier operates via a standard wall switch (not included). Flip the switch to turn the light fixture on or off.
This fixture is dimmable. If connected to a compatible dimmer switch (not included) and using dimmable candelabra bulbs, you can adjust the light intensity to suit your preference.
Maintenance
- Cleaning: To clean the fixture, turn off the power and allow it to cool completely. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents as they may damage the finish.
- Bulb Replacement: Turn off power before replacing bulbs. Allow bulbs to cool completely. Unscrew old bulbs and screw in new candelabra-base bulbs (maximum 60 watts each).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | Power is off at the circuit breaker Bulbs are not correctly installed or burnt out Loose wire connections | Check circuit breaker and turn on Ensure bulbs are screwed in tightly and replace if necessary Verify all wire connections are secure (with power off) |
| Flickering lights | Bulbs not fully screwed in Loose wire connections Incompatible dimmer switch or bulbs | Ensure bulbs are fully screwed in Check for loose wire connections (with power off) Verify dimmer compatibility and use dimmable bulbs |
Specifications
| Brand | Ashley Harbour |
| Model Name | Nilson |
| Model Number | ASH4720A1 |
| Color | Matte Black |
| Material | Alloy Steel |
| Product Dimensions (Diameter x Height) | 25 x 28.25 inches |
| Adjustable Hanging Height | 33 to 81 inches |
| Item Weight | 7.41 pounds |
| Number of Light Sources | 5 |
| Max Wattage per Bulb | 60 watts |
| Bulb Type | Candelabra (E12 base, not included) |
| Power Source | Corded Electric |
| Indoor/Outdoor Usage | Indoor |
| Special Feature | Dimmable |
| Mounting Type | Ceiling Mount |
| Assembly Required | Yes |
Warranty and Support
Warranty: This Ashley Harbour product comes with a limited 1-year warranty. Please refer to the warranty card included in your package or contact Ashley Harbour customer service for specific details regarding coverage and terms.
Customer Support: For technical assistance, missing parts, or warranty inquiries, please contact Ashley Harbour customer service. Contact information can typically be found on the product packaging or the official Ashley Harbour website.