Important Safety Information
Please read and understand all safety instructions before assembly and use of the Tangkula Wicker Chaise Lounge Outdoor Set.
- Always assemble the chair according to the provided instructions.
- Ensure the chair is placed on a stable, level surface to prevent tipping.
- Do not exceed the maximum weight capacity of 400 lbs (181 kg) per chaise lounge.
- Keep the chair away from direct heat sources, open flames, and sharp objects to prevent damage to the PE wicker and fabric.
- Regularly inspect all bolts and connections to ensure they remain tight and secure.
Package Contents
Verify that all components are present before beginning assembly. If any parts are missing or damaged, please contact customer support.
- 2 x Patio Lounge Chair frames
- 2 x Lumbar Pillows
- 2 x Seat Cushions
- 1 x User's Manual (this document)
- Hardware pack (screws, bolts, Allen wrench)
Setup and Assembly
Assembly of the Tangkula Wicker Chaise Lounge is designed to be straightforward. Follow these steps carefully.
- Unpack all components and lay them out on a clean, soft surface to prevent scratches.
- Identify all parts using the included parts list in the separate assembly guide.
- Attach the legs to the main chaise lounge frame using the provided hardware. Ensure all bolts are finger-tightened initially.
- Connect any remaining frame sections as per the assembly diagram.
- Once all parts are loosely assembled, place the chaise lounge on a level surface and gradually tighten all bolts with the Allen wrench. Do not overtighten.
- Place the thick padded cushion onto the chaise lounge. The cushion features fixation straps and bungee cords for secure attachment.
- Position the removable lumbar pillow for added comfort.
Operating Instructions
The Tangkula Wicker Chaise Lounge features a 6-gear adjustable backrest for customized comfort.
- To adjust the backrest, gently lift the backrest to disengage it from its current position.
- Move the backrest to the desired angle, aligning the support bar with one of the six available gear notches.
- Ensure the backrest is securely locked into place before applying weight.
- The chaise lounge can be adjusted from an upright sitting position to a fully reclined position for sunbathing or napping.
Maintenance
Proper care and maintenance will extend the life and appearance of your chaise lounge.
- Cleaning the Frame: The PE wicker rattan and steel frame can be cleaned with a damp cloth and mild soap. Avoid harsh chemicals or abrasive cleaners.
- Cushion Care: The cushion cover is waterproof and features a zippered design for easy removal. It can be spot cleaned with a damp cloth and mild detergent. Allow to air dry completely before reattaching.
- Storage: During prolonged periods of non-use or inclement weather, it is recommended to cover the chaise lounge or store it indoors to protect it from extreme elements and prolong its lifespan.
- Inspection: Periodically check all structural components for any signs of wear, damage, or loose connections. Tighten any loose bolts as needed.
Troubleshooting
If you encounter any issues with your Tangkula Wicker Chaise Lounge, refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Chaise feels unstable or wobbly. | Loose bolts or uneven surface. | Ensure all assembly bolts are securely tightened. Place the chaise on a flat, level surface. Adjust foot pads if applicable. |
| Backrest does not stay in position. | Backrest not fully engaged in the gear mechanism. | Lift the backrest slightly and firmly push it down into the desired gear notch until it clicks into place. |
| Cushion slides off easily. | Fixation straps or bungee cords not secured. | Ensure the cushion's fixation straps and bungee cords are properly attached to the chaise frame. |
| Difficulty cleaning wicker. | Accumulated dirt or improper cleaning method. | Use a soft brush or cloth with mild soap and water. Rinse thoroughly and allow to air dry. Avoid high-pressure washers. |
Specifications
Detailed specifications for the Tangkula Wicker Chaise Lounge Outdoor Set.
- Brand: Tangkula
- Model Number: HW-75139
- Color: Mix Brown + White
- Material: Steel + PE Wicker Rattan + Fabric + Foam
- Overall Dimensions (D x W x H): 79" x 29" x 40" (adjustable height)
- Seat Depth: 47 inches
- Item Weight: 32 lbs (per chaise)
- Weight Capacity: 400 lbs (per chaise)
- Reclining Positions: 6-Gear Adjustable Backrest
- Indoor/Outdoor Usage: Outdoor
- Assembly Required: Yes
- Included Components: Chaise Lounge, Cushion, Lumbar Pillow
Warranty Information
Specific warranty details for the Tangkula Wicker Chaise Lounge Outdoor Set are typically provided with your purchase documentation or can be obtained directly from the manufacturer. Please retain your proof of purchase for any warranty claims.
Common warranty coverage may include defects in materials and workmanship under normal use. Damage resulting from improper assembly, misuse, neglect, or extreme weather conditions may not be covered.
Customer Support
For further assistance, missing parts, or inquiries not covered in this manual, please contact Tangkula customer service.
- Visit the official Tangkula website for support resources and contact information.
- Refer to your purchase receipt or packaging for specific customer service contact details.