YIOU R1 Replacement Filter

YIOU Air Purifier R1 Replacement Filter User Manual

Model: R1 Replacement Filter

1. Product Overview

The YIOU Air Purifier R1 Replacement Filter is designed to maintain optimal air quality in your environment. This 3-in-1 filter system is specifically engineered for compatibility with the YIOU Air Purifier R1.

Key Features:

  • 3-Stage Filtration System: Composed of a pre-filter, a True H13 HEPA filter, and a high-efficient activated carbon filter.
  • Non-woven Fabric Pre-filter: Captures larger airborne particles such as dust and pet hair.
  • True H13 HEPA Filter: Filters particles as small as 0.3 microns, including pollen, pet dander, dust, and tobacco smoke.
  • Advanced Activated Carbon Filter: Effectively neutralizes odors and chemically decomposes harmful gases in the air.
  • Compatibility: Exclusively designed for the YIOU Air Purifier R1.
Diagram illustrating the three stages of the YIOU Air Purifier R1 filter: a blue pre-filter, a white True HEPA filter, and a black activated carbon filter.

Figure 1: Three-stage filtration system components.

2. Filter Replacement Instructions

To ensure your YIOU Air Purifier R1 operates at its best, replace the filter when indicated or as part of routine maintenance.

  1. Power Off: Ensure the air purifier is turned off and unplugged from the power outlet.
  2. Access Filter Compartment: Locate and open the filter compartment cover on your YIOU Air Purifier R1. Refer to your air purifier's main manual for specific instructions on opening the compartment.
  3. Remove Old Filter: Carefully remove the used 3-in-1 filter from the device.
  4. Install New Filter: Insert the new YIOU Air Purifier R1 Replacement Filter into the compartment, ensuring it is seated correctly.
  5. Close Compartment: Securely close the filter compartment cover.
  6. Restore Power: Plug the air purifier back into the power outlet.
YIOU Air Purifier R1 with the blue replacement filter shown next to it, ready for installation.

Figure 2: YIOU Air Purifier R1 and its replacement filter.

3. Operating Instructions: Filter Indicator Reset

The YIOU Air Purifier R1 features a filter indicator to remind you when a filter replacement may be necessary. This indicator is typically represented by blinking SLEEP and ON/OFF buttons.

Resetting the Filter Indicator:

  • If the filter indicator (blinking SLEEP and ON/OFF buttons) is active, it suggests the filter may need replacement.
  • If you have replaced the filter, or if you determine that the current filter is still effectively maintaining air quality, you can reset the indicator.
  • To reset, press and hold both the SLEEP and ON/OFF buttons simultaneously until the device emits three beeps. This action will clear the filter replacement reminder.

Video 1: Demonstrating the YIOU Air Purifier R1 controls, including power and sleep functions relevant to the filter indicator reset.

Video 2: Overview of the YIOU Air Purifier R1's operational modes and control panel.

4. Maintenance

Regular maintenance of your filter ensures continuous optimal performance of your air purifier.

  • Filter Lifespan: The lifespan of the filter depends on usage and air quality. The filter indicator serves as a guide.
  • Visual Inspection: Periodically inspect the filter for visible dirt or discoloration. A heavily soiled filter should be replaced regardless of the indicator status.
  • Cleaning: The pre-filter component can be gently vacuumed to extend its life, but the HEPA and activated carbon layers are not washable and must be replaced.
  • Genuine Filters: Always use original YIOU replacement filters to ensure compatibility and maintain the air purifier's performance and warranty.

5. Troubleshooting

Filter Indicator Blinking:

  • Symptom: The SLEEP and ON/OFF buttons are blinking.
  • Cause: This indicates that the filter may need to be replaced.
  • Solution: Replace the filter if necessary. After replacement, or if the filter is still effective, reset the indicator by pressing and holding the SLEEP and ON/OFF buttons until the device beeps three times.

6. Specifications

BrandYIOU
Model NumberAir Purifier R1 Replacement Filter
Compatible DevicesYIOU Air Purifier R1
MaterialActivated Carbon, Fabric, H13 HEPA Material
Product Dimensions9.25"L x 7.95"W x 0.87"Th (7.95 x 0.87 x 9.25 inches)
Item Weight9.1 ounces
Air Filter ConstructionPleated
Item Package Quantity1
UPC750911986145

7. Customer Support

For any questions or further assistance regarding your YIOU Air Purifier R1 Replacement Filter, please refer to the user manual provided with your YIOU Air Purifier R1 or contact YIOU customer support directly.

Contact information can typically be found on the official YIOU website or within the original air purifier's documentation.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.