Introduction
Thank you for choosing the Ubio Labs 2-in-1 Wireless Charging Stand. This device is designed to efficiently charge your Qi-compatible smartphone and wireless earbuds simultaneously. It features a 15W wireless charging stand for phones, a 5W wireless charging pad for earbuds, and an additional 20W USB-C output for charging a third device. The integrated LED indicators provide clear feedback on charging status. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your charging stand.
What's in the Box
- Ubio Labs 2-in-1 Wireless Charging Stand
- Power Adapter (typically included, though not explicitly listed as a separate item in product details)
- User Manual (this document)
Note: The product details indicate an "LED indicator" as an included component, which is integrated into the charging stand itself.
Setup
- Unpack the Charger: Carefully remove the Ubio Labs 2-in-1 Wireless Charging Stand and its power adapter from the packaging.
- Connect Power: Insert the power adapter cable into the USB-C input port located on the back of the charging stand. Plug the other end of the power adapter into a wall outlet.
- Placement: Place the charging stand on a flat, stable surface, such as a desk or nightstand. Ensure there is adequate ventilation around the device.
Image: The Ubio Labs 2-in-1 Wireless Charging Stand shown alongside its power adapter, illustrating the components ready for connection.
Image: A clear front view of the Ubio Labs 2-in-1 Wireless Charging Stand, highlighting its sleek design and charging surfaces.
Operating Instructions
- Charging a Smartphone: Place your Qi-compatible smartphone vertically or horizontally on the charging stand. Ensure the phone is centered on the charging coil for optimal performance. The LED indicator for the stand will illuminate to confirm charging has begun.
- Charging Wireless Earbuds: Place your compatible wireless earbuds case on the flat charging pad located at the base of the stand. The LED indicator for the pad will illuminate when charging is active.
- Charging an Additional Device (USB-C Output): Connect a USB-C cable (not included) from the 20W USB-C output port on the back of the charging stand to your additional device (e.g., tablet, another smartphone). This allows for simultaneous charging of up to three devices.
Image: A smartphone is shown charging wirelessly on the upright stand, while a pair of wireless earbuds are placed on the flat charging pad at the base.
Image: This illustration demonstrates the versatility of the charger, with a smartphone on the stand, earbuds on the pad, and a tablet connected via the USB-C output port.
Image: A smartphone is shown charging horizontally on the stand, wireless earbuds are on the pad, and a second smartphone is connected and charging via the USB-C port.
Image: A Samsung smartphone is charging on the upright stand, wireless earbuds are on the flat pad, and another smartphone is connected and charging via the USB-C output.
Maintenance
- Cleaning: Disconnect the charger from the power outlet before cleaning. Use a soft, dry, lint-free cloth to wipe the surface of the charging stand. Do not use abrasive cleaners, solvents, or chemical sprays.
- Storage: When not in use for extended periods, store the charger in a cool, dry place away from direct sunlight and extreme temperatures.
- Avoid Liquids: Keep the charging stand away from water and other liquids.
- Handle with Care: Avoid dropping or subjecting the charger to strong impacts.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device not charging wirelessly. | Device not properly aligned; thick phone case; foreign object on pad; power issue. | Ensure device is centered on the charging area. Remove thick cases. Remove any metal objects or cards. Check power connection. |
| Slow charging. | Device not optimally aligned; background apps; non-optimal power adapter. | Re-align device. Close unnecessary apps. Ensure you are using the provided power adapter. |
| LED indicator not lighting up. | No power; device not detected. | Check if the power adapter is securely connected to both the charger and the wall outlet. Re-position the device on the charging area. |
| Charger or device gets hot during charging. | Normal operation; poor ventilation; foreign object; misaligned device. | Some warmth is normal. Ensure adequate ventilation. Remove any foreign objects. Re-align device. If excessively hot, discontinue use and contact support. |
| Audible buzzing sound. | Coil vibration; electrical interference. | A slight buzzing sound can sometimes occur and may be considered normal. If the sound is loud or concerning, try a different power outlet or contact support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | 1999555 |
| Brand | Ubio Labs |
| Wireless Charging Stand Output | Up to 15W (for Qi-compatible phones) |
| Wireless Charging Pad Output | Up to 5W (for compatible wireless earbuds) |
| USB-C Output | 20W |
| Connectivity Technology | Wireless |
| Connector Type | USB Type C |
| Compatible Devices | Cellular Phones, Wireless Earbuds (Qi-compatible) |
| Color | Black |
| Item Weight | 1.34 pounds |
| Package Dimensions | 8.9 x 5.98 x 4.37 inches |
Warranty Information
Specific warranty details for the Ubio Labs 2-in-1 Wireless Charging Stand are typically provided with the product packaging or can be found on the official Ubio Labs website. Please refer to these sources for the most accurate and up-to-date warranty terms and conditions.
Customer Support
For further assistance, technical support, or inquiries regarding your Ubio Labs 2-in-1 Wireless Charging Stand, please visit the official Ubio Labs website or contact their customer service department. Contact information and support resources are usually available on the manufacturer's website.