Anthter ANST01

Anthter Professional Garment Steamer

Model: ANST01

Your ultimate solution for wrinkle-free garments.

1. Introduction

The Anthter 1500W Professional Garment Steamer is designed to efficiently remove wrinkles from a wide range of fabrics, providing a gentle yet powerful steaming experience. Its rapid heat-up time and continuous steam output make it an ideal tool for maintaining your clothing and household textiles.

Anthter Professional Garment Steamer, fully assembled

Figure 1: The Anthter Professional Garment Steamer, ready for use.

2. Safety Information

  • Always ensure the steamer is placed on a stable, flat surface.
  • Do not overfill the water tank.
  • Keep hands and face away from the steam nozzle during operation to prevent burns.
  • The steamer features a dual safety protection system that automatically shuts off when too hot or when water levels are low, and will automatically reset.
  • Unplug the steamer from the power outlet when not in use or before cleaning.

3. Components

  • Main Unit/Base: Contains the water tank, heating element, and control knob.
  • Water Tank: Removable, 2.5L capacity for extended steaming.
  • Telescopic Poles: Adjustable height for various garment lengths.
  • Hanger with Clips: Provides a convenient way to hang garments and secure them for steaming.
  • Steam Hose: Connects the main unit to the steam nozzle.
  • Steam Nozzle: Emits steam for wrinkle removal.
Steamer with large 2.5L water tank

Figure 2: The large 2.5L water tank allows for up to 90 minutes of continuous steaming.

4. Setup Instructions

  1. Unpack: Carefully remove all components from the packaging.
  2. Assemble Poles: Insert the telescopic poles into the designated slots on the main unit base. Ensure they are securely locked into place.
  3. Attach Hanger: Place the garment hanger onto the top of the telescopic poles. The hanger includes clips for securing shirts or pants.
  4. Connect Hose: Attach the steam hose to the main unit and the steam nozzle to the hanger.
  5. Fill Water Tank: Remove the 2.5L water tank from the base. Unscrew the cap, fill with distilled water (recommended to prevent mineral buildup), and securely replace the cap. Insert the filled tank back into the base.

5. Operating Instructions

  1. Power On: Plug the steamer into a 110V power outlet. The indicator light on the base will illuminate.
  2. Select Steam Level: Turn the control knob on the base to select your desired steam level. Options include 'Less Steam' and 'More Steam'.
  3. Heat Up: Allow approximately 35 seconds for the steamer to heat up and produce steam. You may hear a slight heating sound.
    4. Stopwatch showing 35 seconds heat-up time

    Figure 3: Fast 35-second heat-up time.

  4. Prepare Garment: Hang your garment on the integrated hanger. Use the clips to hold pants or skirts.
  5. Steam: Hold the steam nozzle close to the fabric, moving it up and down over the wrinkles. The powerful 248°F steam penetrates deep to soften fibers.
    6. Hand holding steamer nozzle, showing steam output up to 6.5 feet

    Figure 4: Strong steam output for effective wrinkle removal.

  6. Fabric Compatibility: This steamer is suitable for all types of fabric, including delicate silks, wool, linen, cashmere, and synthetics, without the risk of burning.
    7. Before and after comparison of a wrinkled shirt steamed smooth

    Figure 5: Visible difference after steaming.

  7. Finish: Once steaming is complete, turn the control knob to 'OFF' and unplug the unit. Allow the garment to cool before wearing.

6. Maintenance

  • Empty Water Tank: After each use, empty any remaining water from the tank to prevent mineral buildup.
  • Cleaning: Wipe the exterior of the steamer with a soft, damp cloth. Do not use abrasive cleaners.
  • Descaling: If you notice reduced steam output or mineral residue, descale the unit. Consult the full user manual for detailed descaling instructions.
  • Storage: Store the steamer in a cool, dry place. Its compact design allows for easy storage in a linen closet.

7. Troubleshooting

ProblemPossible CauseSolution
No steam outputWater tank empty; Not heated up; Unit not plugged in.Refill water tank; Allow 35 seconds for heat-up; Check power connection.
Water spurting/leakingOverfilled tank; Mineral buildup.Do not overfill; Descale the unit.
Steamer automatically shuts offLow water level; Overheating.Refill water tank; Allow unit to cool down.

8. Specifications

  • Brand: Anthter
  • Model Number: ANST01
  • Wattage: 1500W
  • Voltage: 110 Volts
  • Water Tank Capacity: 2.5 Liters (approx. 85 oz)
  • Heat-up Time: 35 seconds
  • Continuous Steam Time: Up to 90 minutes
  • Steam Temperature: Up to 248°F
  • Safety Features: Dual safety protection system with auto shut-off

9. Warranty and Support

The Anthter Professional Garment Steamer comes with a 3-YEAR WARRANTY. For any questions, concerns, or support needs, please contact Anthter customer service. Refer to your product packaging or the official Anthter website for contact details.

© 2023 Anthter. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.

Answered questions about this manual

My Anthter ANST01 garment steamer has stopped working; the power lights are on, but there is no steam and the plate does not heat up. How can I resolve this?

Based on the manual for the Anthter ANST01 Professional Garment Steamer, if the power lights are on but the unit is not heating or producing steam, please check the following:Safety Shut-off: The steamer features...

Read full answer