1. Introduction
Thank you for choosing the GOLON RX-606 Classic 4-Band Radio. This portable radio is designed to provide reliable reception across AM, FM, SW1, and SW2 bands, offering a versatile listening experience. This manual provides essential information for the safe and efficient operation of your new radio. Please read it thoroughly before use and retain it for future reference.
2. Safety Information
- Do not expose the unit to rain or moisture to prevent fire or electric shock.
- Avoid placing the unit in direct sunlight, near heat sources, or in environments with high humidity or dust.
- Use only the specified power adapter or batteries.
- Do not open the radio casing. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- When cleaning, use a soft, dry cloth. Do not use liquid cleaners or aerosols.
3. Package Contents
Please check that all items are present:
- GOLON RX-606 Classic Radio
- Power Adapter
- 2 x AAA Batteries (included)
Figure 1: Product packaging, illustrating the GOLON RX-606 and other models.
4. Product Overview
Familiarize yourself with the main components and controls of your GOLON RX-606 radio.
Figure 2: Angled view of the GOLON RX-606 radio, showing the speaker grille, tuning dial, and controls.
Figure 3: Front view of the GOLON RX-606 radio, highlighting the frequency display and band selector.
Key Components:
- Telescopic Antenna: For improved reception, especially on FM and SW bands.
- Tuning Dial: Used to select radio frequencies.
- Band Selector: Switch between AM, FM, SW1, and SW2 bands.
- Volume Control: Adjusts the audio output level.
- Power Switch: Turns the radio on or off.
- Speaker: Audio output.
- Battery Compartment: Located at the back, for AAA batteries.
- AC Power Input: For connecting the power adapter.
- Headphone Jack: For private listening (compatible with headphones).
5. Setup
5.1 Powering the Radio
Your GOLON RX-606 radio can be powered by either AC electricity or batteries.
Using AC Power:
- Ensure the radio's power switch is in the OFF position.
- Connect the provided power adapter to the AC power input jack on the radio.
- Plug the power adapter into a standard electrical outlet.
Using Batteries:
- Ensure the radio's power switch is in the OFF position.
- Open the battery compartment cover located on the back of the radio.
- Insert 2 AAA batteries, observing the correct polarity (+/-) as indicated inside the compartment.
- Close the battery compartment cover securely.
Note: Remove batteries if the radio will not be used for an extended period to prevent leakage and damage.
5.2 Antenna Adjustment
For optimal reception, especially on FM and Shortwave (SW) bands, extend the telescopic antenna fully and adjust its direction. For AM reception, the radio uses a built-in ferrite bar antenna, so antenna adjustment is less critical, but rotating the radio itself may improve reception.
6. Operating Instructions
6.1 Turning On/Off
Slide the Power Switch to the ON position to turn on the radio. Slide it to the OFF position to turn off the radio.
6.2 Adjusting Volume
Rotate the Volume Control knob to increase or decrease the sound level to your preference.
6.3 Selecting a Band
Use the Band Selector switch to choose your desired frequency band: AM, FM, SW1, or SW2.
6.4 Tuning to a Station
Once a band is selected, slowly rotate the Tuning Dial to scan through frequencies. Stop when you hear a clear broadcast. For FM and SW bands, adjust the telescopic antenna for best reception.
6.5 Using Headphones
To listen privately, plug standard 3.5mm headphones into the headphone jack. The internal speaker will automatically mute.
7. Maintenance
- Cleaning: Wipe the radio's exterior with a soft, dry cloth. Do not use abrasive cleaners, waxes, or solvents.
- Storage: When not in use for long periods, store the radio in a cool, dry place, away from direct sunlight and extreme temperatures. Remove batteries before storage.
- Battery Replacement: Replace AAA batteries when the radio's performance degrades or if it fails to power on. Ensure correct polarity.
8. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Radio does not turn on. | No power from AC adapter or dead batteries. | Check AC adapter connection and power outlet. Replace batteries if using battery power. |
| Poor reception/static. | Weak signal, antenna not extended, or interference. | Extend and adjust the telescopic antenna. Try rotating the radio. Move away from electronic devices that may cause interference. |
| No sound from speaker. | Volume too low, headphones connected, or speaker malfunction. | Increase volume. Disconnect headphones. If problem persists, contact support. |
9. Specifications
| Feature | Detail |
|---|---|
| Model Number | RX-606 |
| Brand | GOLON |
| Radio Bands Supported | AM, FM, SW1, SW2 (4-band) |
| Tuner Technology | FM Waves |
| Power Source | Wired Electric (AC Power), 2 x AAA Batteries |
| Batteries | 2 AAA batteries required (included) |
| Material | Plastic |
| Color | Black |
| Product Dimensions (L x W x H) | 6.6 x 11.4 x 17.6 cm |
| Item Weight | 500 g |
| Special Features | Portable |
| Compatible Devices | Headphones |
| Included Components | Power Adapter |
Figure 4: Product dimensions of the GOLON RX-606 radio.
10. Warranty and Support
This product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact your retailer or the GOLON customer service department.
Please retain your proof of purchase for any warranty-related inquiries.
