Product Overview
This document provides instructions for the TMS Extendable Universal Steel Pick-Up Truck Ladder Rack, a single-bar heavy-duty utility rack designed for construction trucks and pickup trucks. It features easy installation and adjustable dimensions to fit various truck beds, enhancing cargo capacity for longer items.
Features
- Heavy-duty steel construction for durability.
- Adjustable height: 24 inches plus the height of your truck's bed. Measure the distance between your truck bed and roof for best fit.
- Adjustable width: Fits most pickup trucks, with an adjustable width from 5 feet minimum to 7 feet maximum where the rack attaches to the truck bed.
- New Hook Design: Ideal for heavy-duty tie-down jobs, prioritizing strength and security.
- Drilling required for installation.
What's in the Box
- 1x Headache Rack (single-bar model)
- All necessary mounting hardware (bolts, nuts, washers).
Setup and Installation
The TMS Universal Steel Truck Headache Rack requires drilling for secure installation. Follow these general steps:
- Position the headache rack on your truck bed rails. Ensure it is centered and aligned with your truck's cab.
- Mark the drilling locations on the truck bed rails using the pre-drilled holes on the rack's base plates as a guide.
- Drill holes at the marked locations.
- Secure the rack to the truck bed rails using the provided bolts, nuts, and washers. Tighten all fasteners securely.
- Adjust the width of the crossbar to fit your truck. The crossbar is extendable from 5 feet minimum to 7 feet maximum. Secure the crossbar at the desired width.
- Verify all connections are tight and the rack is stable before use.
Note: For optimal stability and safety, ensure all bolts are properly tightened. Consider using thread-locking compound for permanent installations to prevent loosening from vibrations.
Installation Visuals
The TMS Steel Universal Headache Rack, ready for installation.
All components included for assembly and installation.
Detailed dimensions and adjustable features of the rack.
Operation and Usage
The TMS Universal Steel Truck Headache Rack is designed to extend the cargo capacity of your pickup truck, allowing for the safe transport of longer items that exceed the length of the truck bed.
- Loading Cargo: Place long items such as lumber, pipes, ladders, or kayaks onto the crossbar. Ensure the weight is evenly distributed.
- Securing Cargo: Utilize the integrated hooks on the rack to tie down cargo securely using ropes, bungee cords, or ratchet straps. Always ensure cargo is tightly fastened to prevent shifting during transit.
- Weight Capacity: The rack has a maximum weight capacity of 800 pounds. Do not exceed this limit to ensure safety and prevent damage to the rack or your vehicle.
- Adjustable Width: The crossbar can be adjusted in width to accommodate different cargo sizes or truck bed dimensions. Loosen the securing bolts, adjust the width, and re-tighten firmly.
Usage Examples
The rack provides ample space for transporting items like dirt bikes.
Securely transport long materials such as lumber with the headache rack.
Maintenance
Regular maintenance ensures the longevity and safe operation of your headache rack.
- Cleaning: Clean the rack periodically with mild soap and water to remove dirt, grime, and road salt. Rinse thoroughly and dry to prevent rust.
- Inspection: Regularly inspect all bolts, nuts, and welds for signs of loosening, wear, or damage. Tighten any loose fasteners immediately.
- Corrosion Protection: The rack features a powder-coated finish for rust prevention. If the coating is scratched or damaged, touch up with rust-inhibiting paint to prevent corrosion.
- Storage: If removing the rack for extended periods, store it in a dry place to protect it from the elements.
Troubleshooting
- Rack feels loose after installation: Re-check all mounting bolts and ensure they are tightened to the manufacturer's specifications. Verify that the rack's base plates are flush with the truck bed rails.
- Difficulty adjusting width: Ensure the securing bolts for the extendable crossbar are fully loosened. Clean any debris or rust from the sliding mechanism if present.
- Rust appearing on the rack: Clean the affected area thoroughly, remove any loose rust, and apply a rust-inhibiting primer followed by a suitable outdoor-grade paint.
Specifications
| Feature | Detail |
|---|---|
| Brand | TMS |
| Model Number | 24-New-SG-PURack |
| Material | Alloy Steel |
| Color | Black |
| Max Height | 24 inches (above truck bed) |
| Adjustable Width | 5 feet (minimum) to 7 feet (maximum) |
| Item Weight | 12.47 Kilograms |
| Mounting Type | Tie Down Mount, Truck Bed Mount (Drilling Required) |
| Automotive Fit Type | Universal Fit |
| Is Foldable | No |
Note: Dimensions are approximate and may vary slightly.
Warranty Information
Warranty information for this product is not explicitly provided in the available data. Please refer to the manufacturer's official website or contact TMS customer service for details regarding warranty coverage.
Customer Support
For further assistance, technical support, or inquiries regarding your TMS Universal Steel Truck Headache Rack, please visit the official TMS Store or contact their customer service department.