Introduction
Thank you for purchasing the Bandai Namco MG (Master Grade) 1/100 XXXG-01S2 Altron Gundam EW model kit. This highly detailed plastic model kit allows you to recreate the iconic mobile suit from the Gundam Wing: Endless Waltz series. This manual provides essential information for assembly, understanding its features, and maintaining your model. Please read all instructions carefully before beginning assembly.
Safety Information
- Small Parts: This kit contains small parts that may pose a choking hazard. Keep out of reach of small children.
- Sharp Edges: Some parts may have sharp edges or points. Handle with care during assembly to prevent injury.
- Tools: Use appropriate modeling tools (e.g., nippers, hobby knife) safely. Adult supervision is recommended for younger builders.
- Ventilation: If using paints, glues, or markers, ensure adequate ventilation.
Package Contents
Verify that all components are present before starting assembly:
- Plastic Model Parts (on runners)
- Instruction Manual
- Decals (marking stickers)
- Runners (frames holding the parts)
- Assembly Tools (as specified by manufacturer)
Image: MG 1/100 Altron Gundam EW in a dynamic action pose, showcasing its Dragon Hang weapons. This image represents the completed model.
Setup and Assembly
Assembly of the MG 1/100 Altron Gundam EW requires careful attention to detail. Follow the step-by-step instructions provided in the included printed manual for precise construction.
Recommended Tools:
- Plastic Nippers: For cleanly cutting parts from the runners.
- Hobby Knife: For trimming nubs and refining parts.
- Tweezers: Useful for applying small decals and handling tiny parts.
- Sanding Sticks/Files: For smoothing cut surfaces.
Assembly Steps Overview:
- Unpack and Organize: Carefully open the box and identify all runners. Refer to the runner layout in the manual.
- Part Removal: Use plastic nippers to carefully cut parts from the runners. Cut slightly away from the part first, then make a second cut closer to the part to minimize stress marks.
- Clean Nubs: Use a hobby knife or sanding stick to remove any remaining nubs for a smooth finish.
- Follow Manual: Assemble sections (e.g., head, torso, arms, legs, weapons) according to the numbered steps in the instruction manual. Pay attention to part orientation.
- Decal Application: Apply the included decals after assembly of the respective sections, following the decal placement guide in the manual.
- Final Assembly: Connect all assembled sections to form the complete mobile suit.
Image: Detailed view of the MG 1/100 Altron Gundam EW's torso and head, highlighting intricate armor and color separation.
Image: Close-up of the Altron Gundam EW's arm, featuring the distinctive shield and shoulder armor.
Operating and Features
The MG 1/100 Altron Gundam EW is designed with advanced articulation and signature weaponry, allowing for a wide range of dynamic poses.
Key Features:
- Dragon Hang: The Altron Gundam's distinctive extendable arms, equipped with claws. These can be posed in various attack configurations.
- Twin Beam Trident: The primary melee weapon, capable of being held in one or both hands.
- Advanced Articulation: The Master Grade frame provides extensive joint movement for realistic posing.
- Action Base Compatibility: The model is compatible with Bandai action bases (sold separately) for aerial and dynamic ground poses.
Image: The MG 1/100 Altron Gundam EW posed on an action base (sold separately), with one Dragon Hang deployed.
Image: The Altron Gundam EW demonstrating its fully extended Dragon Hang weapon, ready for attack.
Image: The MG 1/100 Altron Gundam EW in a standing pose, holding its Twin Beam Trident.
Image: Overview of the MG 1/100 Altron Gundam EW's key features, including the Dragon Hang and Twin Beam Trident, with various posing examples.
Maintenance
Proper care will preserve the appearance and integrity of your model kit.
- Cleaning: Dust your model regularly with a soft brush or compressed air to prevent dust buildup. Avoid using harsh chemicals or abrasive materials.
- Storage: Store the model in a cool, dry place away from direct sunlight, which can cause plastic discoloration and decal degradation.
- Handling: Handle the model by its main body parts rather than delicate appendages or weapons to prevent accidental breakage.
Troubleshooting
Common issues and their solutions:
- Loose Joints: If a joint feels too loose, you can apply a thin layer of clear nail polish or a specialized hobby joint-tightening solution to the peg and let it dry before reassembling.
- Broken Parts: Small breaks can often be repaired with plastic cement. For larger or critical breaks, contact Bandai Namco customer support for potential replacement parts, if available.
- Decals Not Sticking: Ensure the surface is clean and dry. Use a decal setting solution to help decals conform to the surface and adhere better.
Specifications
| Brand | Bandai Namco |
| Model Number | XXXG-01S2 |
| Manufacturer Part Number | 645075-2266764 |
| ASIN | B095PRXWH6 |
| Scale | 1/100 |
| Product Dimensions (LxWxH) | 31 x 8.5 x 39 cm |
| Product Weight | 0.64 kg |
| Color | Green |
| Theme | Anime, SF Mecha |
| Character | Altron Gundam |
| Included Items | Plastic Model Parts, Instruction Manual, Decals, Runners, Assembly Tools |
Warranty and Support
For any questions regarding missing parts, manufacturing defects, or assembly assistance, please contact Bandai Namco customer support. Refer to the contact information provided on the product packaging or the official Bandai Namco website for specific support channels in your region.