MYshade Roller Shades Zebra Blinds

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your MYshade Cordless Day and Night Light Filtering Dual Layer Roller Window Blinds. Please read this manual carefully before proceeding with installation or operation to ensure proper use and longevity of your product.

Safety Information

• Always follow local building codes and safety regulations during installation.
• Keep children and pets away from the installation area to prevent accidents.
• Ensure all tools are used safely and correctly. Wear appropriate safety gear, such as eye protection.
• The cordless design of these shades enhances safety for children and pets by eliminating hazardous cords.
• Do not attempt to modify the product. Any modifications may void the warranty and create safety hazards.

What's Included

Your MYshade Zebra Roller Window Shade package includes the following components:

• Cordless Zebra Roller Window Shade
• Installation Kits (brackets, screws, anchors)
• User Manual (this document)

Setup and Installation

Measuring Your Window

Accurate measurements are crucial for proper fit and function. Determine whether you will use an inside mount or an outside mount.

• Inside Mount: For an inside mount, the window depth needs to be more than 3 inches. The recommended shade width should be the window width minus 1/4 inch. The shade height should be equal to the window height.
• Outside Mount: For an outside mount, the recommended shade width should be the window width plus 3 to 6 inches. The shade height should be the window height plus 3 to 6 inches. No deductions are made for outside mount measurements.

Installation Steps

All necessary accessories are included in the installation kit. For visual guidance, please refer to the installation video below.

1. Mark Bracket Locations: Hold the shade in the desired mounting position and mark the locations for the installation brackets. Ensure they are level.
2. Secure Brackets: Drill pilot holes at the marked locations. Insert wall anchors if necessary, then secure the brackets using the provided screws.
3. Attach Shade: Align the headrail of the shade with the installed brackets. Push the shade firmly into the brackets until it clicks securely into place.

Operating Your Shades

Your MYshade Zebra Roller Shades feature a cordless design for easy and safe operation, along with dual fabric layers for versatile light control.

Adjusting Light and Privacy

To adjust the shade, simply lift up or pull down the bottom rail. The shade will stop and hold its position wherever you release it. The dual fabric layers, consisting of alternating sheer mesh and opaque fabric slats, allow you to control the amount of light entering your room and your level of privacy. Align the opaque slats for maximum privacy and light blocking, or align the sheer mesh sections for light filtering and a view outside.

Maintenance and Care

Proper care will help maintain the appearance and functionality of your MYshade Zebra Roller Shades.

• Cleaning: To clean the roller window shades, use a small cloth, a feather duster, or a hand vacuum cleaner with a soft brush.
• Spot Clean Only: For tougher spots, use a damp cloth with mild soap and water. Blot the area gently; do not rub vigorously.
• Avoid Harsh Chemicals: Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the fabric and components.
• Environmental Durability: Made of environmentally friendly polyester, these shades are suitable for humid environments, moisture-proof, and oil-proof. They are designed to resist peeling, cracking, and color changing when exposed to sunlight.

Troubleshooting

If you encounter any issues with your MYshade Zebra Roller Shades, refer to the following common troubleshooting tips:

• Shade does not stay in position: Ensure the cordless mechanism is not obstructed. Gently pull the bottom rail all the way down, then push it all the way up to reset the internal tension spring.
• Difficulty adjusting layers (sheer/opaque alignment): Check for any fabric misalignment. Gently adjust the bottom rail up or down slightly to realign the sheer and opaque sections.
• Shade appears uneven or crooked: Verify that the installation brackets are level and securely fastened. If the issue persists, re-check the installation steps.
• Shade is difficult to raise or lower: Ensure there are no obstructions in the window frame or along the fabric path. If the issue is stiffness, try operating the shade fully up and down a few times to loosen the mechanism.

Product Specifications

Warranty and Support

MYshade products are manufactured to high-quality standards. For specific warranty details regarding your Zebra Roller Window Shade, please refer to the documentation included with your purchase or contact MYshade customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, technical support, or to inquire about replacement parts, please visit the official MYshade website or contact their customer support team through the contact information provided on your product packaging or purchase platform.