CORAVIN Timeless Three Plus Wine Preservation System User Manual

1. Introduction and Overview

The CORAVIN Timeless Three Plus Wine Preservation System allows you to pour wine without removing the cork, preserving the remaining wine for weeks, months, or even years. This system utilizes argon gas to protect wine from oxidation, ensuring each glass tastes as fresh as the first.

This manual provides detailed instructions for the setup, operation, and maintenance of your Timeless Three Plus system.

Image 1.1: Wine Preservation Comparison. This graph illustrates the extended preservation capabilities of the Coravin Timeless system compared to other methods, showing wine can be preserved for 2+ years.

2. Product Components

The CORAVIN Timeless Three Plus system includes the following components:

• Coravin Timeless System: The main device for accessing and preserving wine.
• Coravin Pure™ Argon Capsules (2x 21ml): Contains 100% food-grade argon gas for preservation.
• Coravin Screw Caps (2x): For use with screw-top wine bottles.
• Coravin Aerator: Attaches to the spout to aerate wine as it is poured.
• Wine Bottle Sleeve: Provides protection for glass bottles.

Image 2.1: Timeless Three Plus System Components. This diagram labels the key parts of the Coravin Timeless Three Plus system, including the handle, argon gas trigger, pour spout, needle, clamp release, SmartClamps, and capsule cup.

Image 2.2: Coravin Pure Capsules. These capsules contain 100% food-grade argon gas, which blankets the remaining wine to prevent oxidation. Each capsule can pour up to 15 five-ounce (150ml) glasses of wine with Timeless Systems.

3. Setup Instructions

1. Install the Argon Capsule: Unscrew the capsule cup from the bottom of the system. Insert a Coravin Pure™ Argon Capsule into the cup, ensuring it is seated correctly. Screw the cup back onto the system until it is firmly tightened. A small hiss indicates the capsule is properly installed.
2. Prepare the Wine Bottle: For natural corks, no special preparation is needed. For screw-top bottles, replace the original screw cap with a Coravin Screw Cap.
3. Attach the Aerator (Optional): If desired, twist the Coravin Aerator onto the pour spout until secure.

4. Operating Instructions

1. Clamp the System: Place the Coravin system over the neck of the wine bottle. Ensure the SmartClamps securely grip the bottle. Press the clamp release to open the clamps, position the system, and then release the clamp release to secure it.
2. Insert the Needle: Firmly press the handle down to insert the needle through the cork. Continue pressing until the needle is fully inserted.
3. Pour the Wine: Tilt the bottle as if pouring normally. Briefly press and release the argon gas trigger to pressurize the bottle and initiate the wine flow. Release the trigger to stop the flow. Repeat short presses as needed to maintain a steady pour.
4. Remove the System: Once the desired amount of wine is poured, tilt the bottle upright. Pull the handle upwards to slowly withdraw the needle from the cork. The cork will naturally reseal.
5. For Screw-Top Bottles: When using Coravin Screw Caps, the process is similar. The needle will pierce the silicone membrane of the screw cap. After pouring, remove the system. The screw cap will reseal, allowing for preservation.

Image 4.1: Pouring Wine with Coravin. This image demonstrates the Coravin system in use, showing wine being poured into a glass while the system remains attached to the bottle.

5. Maintenance and Cleaning

Proper maintenance ensures the longevity and performance of your Coravin system.

• After Each Use: Rinse the spout with warm, clean water. Pay special attention to the SmartClamps and the needle well. Ensure the SmartClamps move up and down with ease.
• Clear the Needle: After rinsing, press and release the trigger quickly to remove any water from inside the needle.
• Wipe Dry: Wipe the system dry with a clean, soft cloth.
• Important: Do not submerge the system in water. It is not dishwasher safe. Do not use detergents or abrasive cleaners.

6. Troubleshooting

If you encounter issues with your Coravin Timeless Three Plus system, consider the following:

• No Wine Flow: Ensure the argon capsule is properly installed and tightened. Check if the needle is fully inserted into the cork. Press the trigger firmly.
• Slow Wine Flow: The needle might be partially clogged. Perform the cleaning steps for the needle. Ensure the bottle is tilted sufficiently.
• Gas Leakage: Verify the argon capsule is securely tightened. If leakage persists, the capsule may be faulty or the system may require service.
• Cork Does Not Reseal: This system is designed for natural corks. Synthetic corks or damaged natural corks may not reseal perfectly. Ensure the needle is withdrawn slowly and straight.

For further assistance, please contact CORAVIN customer support.

7. Specifications

8. Warranty and Support

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official CORAVIN website. For technical support, replacement parts, or general inquiries, please contact CORAVIN customer service through their official channels.

Online Support: www.coravin.com