Pro Breeze 2500W Oil Filled Radiator Instruction Manual

Important Safety Instructions

Please read and understand all instructions before using this appliance. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Do not cover the heater.
• Do not use in bathrooms or wet areas.
• Keep away from flammable materials.
• Always unplug when not in use.
• Supervise children and pets near the heater.
• Do not operate with a damaged cord or plug.
• Ensure the heater is placed on a stable, level surface.

Product Overview

The Pro Breeze 2500W Oil Filled Radiator is designed to provide efficient and consistent heating for various indoor spaces. It features 11 oil-filled heating elements, multiple power settings, an adjustable thermostat, and a convenient 24-hour timer for personalized comfort and energy saving.

Image: Pro Breeze 2500W Oil Filled Radiator, showcasing its adjustable thermostat, 3 power settings, 24-hour timer, 11 elements, overheat protection, and 4 swivel wheels.

Key Features:

• Powerful Heating: 2500W output with 11 oil-filled elements.
• Multiple Heat Settings: Three power levels (1200W, 1300W, 2500W) for versatile heating.
• Adjustable Thermostat: Maintain desired room temperature.
• 24-Hour Timer: Program heating schedules for convenience and energy efficiency.
• Advanced Safety: Built-in overheat protection and anti-tip-over switch for safe operation.
• Portable Design: Equipped with 4 wheels and a carry handle for easy movement and storage.
• Quiet Operation: Operates at a low noise level of 32dB.

Setup and Assembly

The Pro Breeze Oil Filled Radiator comes pre-assembled, requiring minimal setup before first use.

Unpacking:

1. Carefully remove the heater from its packaging.
2. Check for any signs of damage. If damaged, do not use and contact customer support.
3. Ensure all components are present: heater unit, wheels (if not pre-attached), and instruction manual.

Wheel Attachment (if necessary):

If the wheels are not pre-attached, follow these steps:

1. Turn the heater upside down on a soft, non-abrasive surface to avoid scratching.
2. Locate the wheel mounting brackets at the bottom of the heater.
3. Insert the wheel axles into the designated holes until they click securely into place.
4. Carefully turn the heater upright.

Placement:

• Place the heater on a firm, level surface.
• Ensure there is at least 50cm (20 inches) of clear space around the heater to allow for proper air circulation.
• Do not place the heater directly below a power socket.
• Avoid placing the heater near curtains, furniture, or other flammable materials.

Operating Instructions

Familiarize yourself with the control panel before operation.

Image: Close-up of the heater's control panel, highlighting the adjustable thermostat, 3 power settings (Low, Medium, High), and the 24-hour timer dial.

Powering On/Off:

• Plug the heater into a suitable electrical outlet.
• Turn the power switch to the 'ON' position. The power indicator light will illuminate.
• To turn off, switch the power to 'OFF' and unplug from the outlet.

Adjusting Heat Settings:

The heater offers three power settings:

• Low (I): For minimal heat or smaller spaces.
• Medium (II): For moderate heating.
• High (III): For maximum heat output or larger spaces.

Select the desired power level using the power selector dial.

Using the Adjustable Thermostat:

1. Turn the thermostat dial clockwise to the maximum setting.
2. Once the room reaches your desired temperature, slowly turn the thermostat dial counter-clockwise until you hear a 'click' and the heater turns off.
3. The heater will now automatically maintain this temperature, cycling on and off as needed.

Setting the 24-Hour Timer:

The timer allows you to program specific on/off periods for the heater.

1. Set Current Time: Rotate the outer ring of the timer dial clockwise until the triangular pointer aligns with the current time of day (using a 24-hour format). For example, if it's 10 AM, align the pointer with '10'.
2. Program Off Periods: The inner ring has 96 red segments, each representing a 15-minute period. To set a period when you want the heater to be OFF, push the corresponding red segments towards the inner ring (green color will appear).
3. Program On Periods: To set a period when you want the heater to be ON, leave the corresponding red segments pushed towards the outer ring (red color will appear).
4. Activate Timer: Ensure the heater's power switch is ON and the thermostat is set to your desired temperature. The heater will now operate according to your programmed schedule.

Note: The triangular pointer on the dial is fixed and indicates the current time. Always ensure the outer ring is set to the correct current time for accurate timer operation.

Maintenance and Storage

Cleaning:

• Always unplug the heater and allow it to cool completely before cleaning.
• Wipe the exterior surfaces with a soft, damp cloth. Do not use abrasive cleaners or solvents.
• Do not immerse the heater in water or any other liquid.
• Ensure the heater is completely dry before plugging it back in.

Storage:

• When not in use, store the heater in a cool, dry place.
• Wrap the power cord neatly around the integrated cable storage (if available) to prevent damage.
• Store in its original packaging or cover to protect from dust.

Image: The Pro Breeze Oil Filled Radiator showing its integrated cable storage feature for tidy storage.

Troubleshooting

Specifications

Warranty and Support

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Pro Breeze website. Information regarding spare parts availability is not provided in this manual.

Manufacturer: One Retail Group