Introduction
This manual provides instructions for the safe and efficient use of your BLACK+DECKER Wireless Remote-Control Outlet, Model BDXPA0001-FBA. Please read this manual thoroughly before operating the device and retain it for future reference.
Product Overview
Components Included
- 1 x Wireless Remote Control
- 1 x Polarized Outlet Receiver
Key Features
- Wireless Control: Operate lights and small appliances remotely.
- Pre-programmed: Ready for immediate use out of the box.
- Polarized 10A Outlet: Designed for devices with 2-prong plugs.
- Extended Range: Provides a strong signal up to 100 feet.
- Space-Saving Design: Side outlet configuration prevents blocking adjacent outlets.
- Indoor Use: Suitable for various indoor applications.
Image: The BLACK+DECKER Wireless Remote-Control Outlet receiver and its accompanying remote control. The receiver is a white rectangular unit with two prongs for plugging into a wall outlet and a polarized outlet on its side. The remote is a smaller, white, handheld unit with 'ON' and 'OFF' buttons.
Image: A close-up view highlighting the features of the BLACK+DECKER Wireless Remote-Control Outlet. Text indicates it has a 'Polarized Outlet 10A', 'Side Outlet - Space Saving', is 'Pre-programmed', includes a 'Battery Included', and offers a '100 ft Range' with a 'Strong Signal'. The image also confirms it is for 'INDOOR' use.
Setup
Installation Steps
- Unpack Components: Carefully remove the wireless remote control and the polarized outlet receiver from their packaging.
- Plug in Receiver: Insert the polarized outlet receiver into a standard indoor wall outlet. Ensure it is securely seated.
- Connect Appliance: Plug the appliance or light you wish to control into the side outlet of the receiver. Ensure the appliance is switched to its 'ON' position if it has a manual switch.
- Verify Operation: The remote control is pre-programmed and should work immediately. Press the 'ON' button on the remote to turn on the connected appliance, and 'OFF' to turn it off.
Image: A pair of hands holding the BLACK+DECKER Wireless Remote-Control Outlet receiver and the remote control, demonstrating their compact size and ease of handling during setup.
Operating Instructions
Basic Operation
Once the receiver is plugged in and your appliance is connected, use the remote control to operate it:
- Press the 'ON' button to activate the connected appliance.
- Press the 'OFF' button to deactivate the connected appliance.
The remote control provides a reliable signal up to 100 feet, allowing you to control devices from various locations within your home.
Image: A hand pressing the 'ON' button on the BLACK+DECKER wireless remote control, with a softly lit room in the background, illustrating remote usage.
Maintenance
Cleaning and Care
- Ensure the device is unplugged before cleaning.
- Wipe the surfaces of the receiver and remote with a soft, dry cloth.
- Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the product.
- Keep the device away from water and excessive moisture.
Battery Replacement (Remote Control)
The remote control uses a CR2032 coin cell battery. If the remote's indicator light does not illuminate or the range decreases significantly, the battery may need replacement.
- Locate the battery compartment on the back of the remote control.
- Open the compartment using a small screwdriver or coin, if necessary.
- Remove the old CR2032 battery.
- Insert a new CR2032 battery with the positive (+) side facing up.
- Close the battery compartment securely.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Appliance does not turn ON/OFF. |
|
|
| Reduced remote control range. |
|
|
Specifications
| Feature | Detail |
|---|---|
| Model Number | BDXPA0001-FBA |
| Product Dimensions | 3.57 x 2.7 x 3.06 inches |
| Weight | 5.64 ounces |
| Voltage | 120 Volts (AC) |
| Current Rating | 10 Amps |
| Material | Copper |
| Connector Type | Wireless |
| Color | White |
| Remote Range | Up to 100 feet |
| Remote Battery Type | CR2032 (included) |
| Certifications | CSA Approved |
Warranty and Support
Warranty Information
This BLACK+DECKER product is covered by a 1-Year Limited Warranty from the date of purchase. This warranty covers defects in material and workmanship under normal use. Please retain your proof of purchase for warranty claims.
Image: The BLACK+DECKER Wireless Remote-Control Outlet and remote, with an overlay indicating '1 YEAR WARRANTY'.
Customer Support
For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact BLACK+DECKER customer support. Refer to the product packaging or the official BLACK+DECKER website for current contact information.