COSTWAY 360° Swivel Bar Stool Instruction Manual

Important Safety Information

Please read and understand all instructions before assembly and use of this product. Keep this manual for future reference.

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or broken.
• Assemble the bar stool on a soft, clean surface to prevent scratches.
• Tighten all screws and bolts securely. Periodically check and re-tighten fasteners to maintain stability.
• Do not stand on the bar stool. Use it only for seating.
• Do not exceed the maximum weight capacity of 264 lbs (120 kg).
• Keep children away from the assembly area. Small parts may pose a choking hazard.

Package Contents

Verify that all components are included in your package:

• Bar Stool Seat with Swivel Mechanism (1 per stool)
• Backrest (1 per stool)
• Front Legs (2 per stool)
• Rear Legs (2 per stool)
• Footrest Bars (4 per stool)
• Hardware Pack (Screws, Washers, Allen Wrench)
• Instruction Manual (This document)

Image: Two assembled COSTWAY bar stools, showcasing the antique white frame and grey upholstered seat.

Setup and Assembly

Assembly is required for this bar stool. Follow these steps carefully:

1. Unpack Components: Carefully remove all parts from the packaging. Lay them out on a soft, flat surface to prevent damage. Identify each component using the parts list.
2. Attach Legs to Seat: Align the top of each leg with the corresponding mounting points on the underside of the swivel seat. Secure them using the provided screws and washers. Do not fully tighten yet.
3. Install Footrest Bars: Connect the footrest bars between the legs. Ensure they are properly aligned and secure them with screws. Once all footrest bars are in place, you can begin to gently tighten all leg and footrest screws.
4. Attach Backrest: Position the backrest against the rear of the seat frame. Secure it using the designated screws. Ensure the backrest is firm and stable.
5. Final Tightening: Once all components are loosely assembled, place the stool upright on a level surface. Apply gentle downward pressure to ensure all parts are seated correctly. Then, systematically tighten all screws and bolts using the Allen wrench until they are secure. Do not overtighten.
6. Inspect: Before use, thoroughly inspect the assembled bar stool to ensure all connections are tight and the stool is stable.

Image: Dimensional diagram of the bar stool, indicating height, width, and depth measurements for assembly reference.

Operating Instructions

The COSTWAY 360° Swivel Bar Stool is designed for comfortable and versatile seating.

• Swivel Function: The seat is equipped with a 360° swivel mechanism, allowing you to rotate freely in any direction. This feature enhances convenience for conversations and movement.
• Footrest: Utilize the integrated footrest bars to comfortably rest your feet, promoting better posture and reducing leg fatigue during extended seating.
• Weight Capacity: The bar stool is designed to support a maximum weight of 264 pounds (120 kg). Do not exceed this limit to ensure safety and product longevity.

Image: A detailed view of the bar stool's seat, highlighting the 360-degree swivel capability with an illustrative arrow.

Maintenance

Proper care will extend the life and appearance of your bar stool.

• Cleaning: For the upholstered seat, wipe with a damp cloth. For the wooden frame, use a soft, dry cloth. Avoid harsh chemicals or abrasive cleaners.
• Spills: Promptly clean any spills on the upholstered seat to prevent staining.
• Fasteners: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as necessary to maintain stability and prevent wobbling.
• Environment: Avoid exposing the bar stool to direct sunlight or extreme temperature changes, as this can cause the wood to warp or fade.

Image: An infographic detailing the bar stool's features, including its ergonomic backrest, comfortable upholstered seat, 360-degree swivel, convenient footrest, sturdy construction, and solid rubber wood legs.

Troubleshooting

If you encounter any issues with your bar stool, refer to the following common problems and solutions:

Specifications

Warranty and Support

COSTWAY stands behind the quality of its products. For specific warranty information, product support, or to order replacement parts, please contact COSTWAY customer service directly.

You can often find contact details on the product packaging, the official COSTWAY website, or through your original point of purchase.

Please have your model number (B094DH6B5P) and purchase date available when contacting support.