1. Introduction
Thank you for choosing the OsmoFresh Quella Life Tabletop Reverse Osmosis System. This device provides high-quality filtered drinking water with the convenience of an integrated water heater, offering multiple temperature settings. This manual will guide you through the setup, operation, maintenance, and troubleshooting of your new system to ensure optimal performance and longevity.
Figure 1: Front view of the OsmoFresh Quella Life Tabletop Reverse Osmosis System.
2. Safety Instructions
- Read all instructions before operating the appliance.
- Keep the appliance away from heat sources and direct sunlight.
- Do not immerse the appliance, cord, or plug in water or other liquids.
- Ensure the power supply matches the specifications on the rating label.
- Supervise children to ensure they do not play with the appliance.
- Unplug the appliance before cleaning or maintenance.
- Use only original OsmoFresh replacement filters.
- Exercise caution when dispensing hot water to prevent burns.
3. Product Components
The OsmoFresh Quella Life system includes the main unit, a raw water tank, a wastewater tank, and a set of quick-change filters.
Figure 2: OsmoFresh Quella Life system with included filters.
3.1 Filtration System Overview
The system employs a multi-stage reverse osmosis filtration process to remove impurities from water.
Figure 3: Diagram illustrating the 3-filter, 5-stage reverse osmosis filtration process.
- Sediment & Activated Carbon Filter (2-in-1 Pre-filter): Removes large particles like sand, rust, odors, and chlorine.
- Reverse Osmosis Membrane: Filters particles as small as 0.0001 micrometers, including bacteria, viruses, nitrates, nitrites, fluoride, lime, uranium, arsenic, and pharmaceutical residues.
- 2-in-1 Post-filter: Mineralizes the water and ensures a fresh taste, while also increasing the pH value.
4. Setup and Initial Use
The OsmoFresh Quella Life system requires no plumbing installation. Simply place it on a stable surface, plug it in, and fill the water tank.
- Unpacking: Carefully remove all components from the packaging.
- Placement: Place the unit on a flat, stable, and dry surface, ensuring adequate ventilation around the device.
- Drip Tray: Attach the stainless steel drip tray to the front of the unit.
- Water Tanks: Ensure the raw water tank (3L capacity) and wastewater tank (1L capacity) are correctly seated.
- Power Connection: Plug the power cord into a suitable electrical outlet (220-240V).
- Filling the Raw Water Tank: Remove the raw water tank, fill it with tap water, and place it back into the unit.
- Initial Flush: For first-time use or after filter replacement, perform an initial flush cycle as described in the "Operation" section to ensure optimal water quality.
Figure 4: The system requires no permanent water connection, offering flexible placement.
Figure 5: Illustration of the separate 3L raw water tank and 1L wastewater tank.
5. Operating Instructions
The OsmoFresh Quella Life features an intuitive touchscreen display for easy operation.
Figure 6: Touchscreen display showing temperature settings, TDS, and control buttons.
5.1 Touchscreen Functions
- TDS Display: Shows the Total Dissolved Solids (TDS) level of the filtered water, indicating water quality.
- Temperature Selection: Choose from 6 preset temperature levels (e.g., 15°C, 45°C for milk, 55°C for honey, 80°C for tea, 90°C for coffee, 100°C for boiling water).
- Reset Button: Used for resetting filter life indicators after replacement.
- On/Off Button: Powers the unit on or off.
- Lock Button (Child Safety): Activates or deactivates the child safety lock, preventing accidental hot water dispensing.
- Filter Change Reminder: The display indicates when filters 1, 2, or 3 need to be replaced.
5.2 Dispensing Water
- Ensure the raw water tank is filled.
- Place a cup or container on the drip tray.
- Select the desired water temperature on the touchscreen.
- If dispensing hot water, ensure the child lock is disengaged (if active).
- Press the dispense button (usually indicated by a water droplet icon or the selected temperature).
- The system will heat and dispense the filtered water. Hot water is dispensed in seconds.
- To stop dispensing, press the dispense button again.
Caution: Hot water can cause severe burns. Always use the child safety lock when not actively dispensing hot water and supervise children around the appliance.
6. Maintenance and Filter Replacement
Regular maintenance ensures the longevity and optimal performance of your OsmoFresh Quella Life system. The system features a quick-change filter design for easy replacement.
6.1 Filter Replacement
The touchscreen display will indicate when a filter needs replacement. It is recommended to replace filters according to the manufacturer's guidelines or when indicated by the system.
Figure 7: The quick-change filter technology simplifies filter replacement.
- Unplug the appliance from the power outlet.
- Open the filter compartment cover.
- Twist the old filter counter-clockwise to unlock it, then pull it out.
- Insert the new filter into the slot and twist it clockwise until it locks into place.
- Close the filter compartment cover.
- Plug the appliance back in.
- Press and hold the "Reset" button on the touchscreen to reset the filter life indicator for the replaced filter.
- Perform an initial flush cycle after replacing filters to ensure proper function and remove any air from the system.
6.2 Cleaning
- Exterior: Wipe the exterior of the unit with a soft, damp cloth. Do not use abrasive cleaners or solvents.
- Drip Tray: Regularly empty and clean the drip tray to prevent water overflow and bacterial growth.
- Water Tanks: Periodically clean the raw water and wastewater tanks with mild soap and water. Rinse thoroughly before reattaching.
- Descaling: The integrated ScaleShield® technology helps prevent limescale buildup. However, if you notice reduced water flow or heating efficiency, consult the full manual for descaling procedures.
7. Troubleshooting
If you encounter issues with your OsmoFresh Quella Life system, refer to the following common problems and solutions.
| Problem | Possible Cause | Solution |
|---|---|---|
| No water dispensed. | Raw water tank empty; power not connected; child lock active (for hot water). | Fill raw water tank; check power connection; deactivate child lock. |
| Water tastes unusual. | New filters not flushed; filters need replacement. | Perform initial flush; replace indicated filters. |
| Slow water flow. | Clogged filters; air in the system. | Replace filters; perform a flush cycle. |
| Error message on display. | System malfunction; sensor issue. | Refer to the full manual for specific error codes or contact customer support. |
If the problem persists after attempting these solutions, please contact OsmoFresh customer support.
8. Technical Specifications
Figure 8: Dimensions and key technical data of the OsmoFresh Quella Life system.
| Feature | Specification |
|---|---|
| Brand | OsmoFresh |
| Model Number | ROQL |
| Color | White Edition |
| Dimensions (L x W x H) | 45 x 20 x 39 cm |
| Weight | 9 Kilograms |
| Raw Water Tank Capacity | 3 Liters |
| Wastewater Tank Capacity | 1 Liter |
| Power | 2200 Watts |
| Voltage | 220 Volts (AC) |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Filtration Stages | 5 stages (3 filters) |
| RO Membrane Pore Size | 0.0001 µm |
| Temperature Levels | 6 (approx. 15-100 °C) |
| Installation Type | Countertop (No plumbing required) |
9. Warranty and Support
For warranty information, please refer to the warranty card included with your product or visit the official OsmoFresh website.
If you require technical assistance, have questions about your product, or need to order replacement parts, please contact OsmoFresh customer support. Contact details can typically be found on the product packaging, the official website, or your purchase documentation.
