Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of the CAME 806SL-0280 Code Lock. The 806SL-0280 is an advanced surface-mounted access control system designed for secure entry management.
With its 12-button keypad and CXN Bus Technology, it integrates seamlessly with CAME automation systems for sliding gates, swing gates, automatic barriers, and garage doors. Its robust, weatherproof design makes it suitable for both residential and commercial applications.
Safety Information
Please read all safety warnings and instructions carefully before installing or operating the device. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Ensure all power is disconnected before performing any installation or maintenance.
- Installation should only be performed by qualified personnel in accordance with local electrical codes.
- Do not expose the device to excessive moisture or extreme temperatures beyond its specified operating range.
- Use only original CAME spare parts and accessories.
- Keep the device away from children and unauthorized persons.
Product Overview
The CAME 806SL-0280 Code Lock features a durable, surface-mounted design with a backlit keypad for visibility in low-light conditions. It is engineered for reliable and secure access control.
Figure 1: Front view of the CAME 806SL-0280 Code Lock, showcasing its backlit keypad and robust casing.
Figure 2: Angled view of the CAME 806SL-0280 Code Lock, highlighting its compact and weatherproof design.
Key Components:
- Keypad: 12 backlit buttons (0-9, *, #) for code entry.
- Casing: Weatherproof enclosure, IP54 rated, suitable for outdoor installation.
- Internal Electronics: Utilizes CXN BUS technology for secure communication.
Installation and Setup
Mounting the Device
The 806SL-0280 is designed for surface mounting. Choose a flat, stable surface at a convenient height for user access.
- Mark the desired mounting position on the wall.
- Drill pilot holes for the mounting screws, ensuring they align with the device's mounting points.
- Secure the device to the wall using appropriate screws and anchors.
Figure 3: Example of a user interacting with the mounted CAME 806SL-0280 Code Lock.
Wiring and Connection
The 806SL-0280 utilizes CXN BUS technology for connection to CAME automation systems. Refer to the specific wiring diagram provided with your CAME automation unit for detailed connection instructions.
- Ensure power is OFF before making any electrical connections.
- Connect the CXN BUS wires from the code lock to the corresponding terminals on your CAME control unit.
- Verify all connections are secure and properly insulated.
- Once wiring is complete, restore power to the system.
Operating Instructions
Basic Operation
To activate the connected automation (e.g., open a gate), simply enter a valid access code on the keypad. The keypad will illuminate upon touch, and a confirmation signal (e.g., beep) may indicate successful code entry.
- Enter your pre-programmed numeric code.
- Press the '#' key (or designated activation key) to confirm the entry.
Programming Access Codes
Programming of access codes is typically managed through the connected CAME control unit or a dedicated programming interface. Refer to the manual of your specific CAME automation system for detailed instructions on adding, modifying, or deleting user codes.
Note: The 806SL-0280 acts as an input device; code management functionality resides within the main CAME control panel.
Maintenance
The CAME 806SL-0280 Code Lock requires minimal maintenance due to its robust design and weatherproof construction.
- Cleaning: Periodically wipe the keypad and casing with a soft, damp cloth to remove dust and dirt. Do not use abrasive cleaners or solvents.
- Inspection: Regularly check for any signs of physical damage to the casing or keypad. Ensure all mounting screws remain tight.
- Functionality Test: Periodically test the functionality of the code lock by entering a valid code to ensure proper operation of the connected automation.
Troubleshooting
This section addresses common issues you might encounter with the CAME 806SL-0280 Code Lock.
| Problem | Possible Cause | Solution |
|---|---|---|
| Keypad does not light up. | No power to the unit; loose wiring; internal fault. | Check power supply to the CAME control unit. Verify CXN BUS connections. If problem persists, contact support. |
| Code entered, but automation does not activate. | Incorrect code entered; code not programmed; issue with the CAME control unit. | Ensure correct code is entered. Verify code programming in the main control unit. Check the status of the CAME automation system. |
| Buttons feel sticky or unresponsive. | Dirt or debris under buttons. | Clean the keypad surface with a soft, damp cloth. Avoid using excessive force. |
Technical Specifications
Below are the technical specifications for the CAME 806SL-0280 Code Lock:
| Feature | Detail |
|---|---|
| Brand | Came |
| Model Number | 806SL-0280 |
| Series | 806SL-0280 |
| Colour | Gray |
| Power Source | Corded Electric (via CXN BUS) |
| Item Weight | 172 g |
| Manufacturer | CAME SPA |
| Connectivity Technology | Wired (CXN BUS) |
| Keyboard Description | Backlit |
| Recommended Use | Outdoor Access Control |
| IP Rating | IP54 (from feature bullets) |
Figure 4: Dimensional drawing of the CAME 806SL-0280 Code Lock (dimensions in mm).
Warranty and Support
For warranty information, please refer to the documentation provided with your purchase or contact your authorized CAME dealer. CAME products are designed for durability and reliability, backed by the manufacturer's commitment to quality.
If you require technical assistance, troubleshooting beyond this manual, or have questions regarding your CAME 806SL-0280 Code Lock, please contact CAME customer support or your local service center. Contact details can typically be found on the CAME official website or in your product packaging.
Online Resources: For additional support and resources, visit the official CAME website. You may find FAQs, updated manuals, and contact information for your region.