Almost Skateboard Deck Youness Amrani Relics Green 8.0" x 31.7" with Grip Instruction Manual

Introduction

This manual provides essential instructions for the setup, use, and maintenance of your Almost Skateboard Deck Youness Amrani Relics Green 8.0" x 31.7" with Grip. Please read these instructions carefully to ensure proper assembly and to maximize the lifespan and performance of your skateboard deck.

Product Overview

The Almost Skateboard Deck Youness Amrani Relics Green is constructed with Resin-7 North American Maple, featuring 7-ply 100% North American Maple with Epoxy Resin Glue for durability and strength. It measures 8.0" x 31.7" with a 14.25" wheelbase and includes a sheet of Black Diamond Griptape.

Setup Instructions

Proper setup is crucial for safety and performance. This section details the application of grip tape and general assembly considerations for your skateboard deck.

Applying Grip Tape

1. Prepare the Deck Surface: Ensure the top surface of the skateboard deck is clean, dry, and free of dust or debris.
2. Position the Grip Tape: Carefully peel back a small portion of the backing paper from the grip tape. Align the grip tape over the deck, ensuring it covers the entire surface with a slight overhang on all sides.
3. Apply Gradually: Slowly peel off the remaining backing paper while pressing the grip tape firmly onto the deck from the center outwards. Use a clean cloth or a specialized grip tape tool to smooth out any air bubbles. Work from the middle towards the edges to prevent bubbles.
4. Trim Excess: Once the grip tape is fully adhered, use a sharp razor blade or utility knife to carefully trim the excess grip tape around the edges of the deck. Hold the blade at a slight angle to create a clean, beveled edge.
5. File Edges (Optional): For a smoother finish, you can gently file the edges of the grip tape with a piece of leftover grip tape or a metal file.

Attaching Trucks and Wheels

After applying grip tape, you will need to attach skateboard trucks, wheels, and bearings (sold separately) to complete your skateboard. Ensure all hardware is securely fastened according to the manufacturer's instructions for the trucks and wheels.

• Trucks: Align the truck baseplates with the pre-drilled holes on the deck. Insert the hardware bolts from the top (grip tape side) and secure with nuts from the bottom.
• Wheels and Bearings: Install bearings into your wheels, then mount the wheels onto the truck axles, securing them with axle nuts.

Operating Your Skateboard

This deck is designed for skateboarding. Always wear appropriate safety gear, including a helmet, knee pads, elbow pads, and wrist guards. Skate in designated areas and be aware of your surroundings. Practice basic maneuvers in a safe, open space before attempting advanced tricks.

• Safety First: Always prioritize safety. Inspect your skateboard before each use.
• Learn the Basics: Start with pushing, balancing, and turning on flat ground.
• Respect Others: Be mindful of pedestrians and other users in shared spaces.

Maintenance

Regular maintenance will extend the life of your skateboard deck and ensure optimal performance.

• Deck Care:
  • Avoid exposing the deck to excessive moisture or extreme temperatures, as this can warp the wood or delaminate the plies.
  • Store your skateboard in a dry, cool place when not in use.
  • Inspect the deck regularly for cracks, chips, or signs of delamination. Small chips can be cosmetic, but larger cracks may compromise structural integrity.
• Grip Tape Cleaning:
  • To clean dirty grip tape, use a grip tape cleaner block or a stiff wire brush. Gently scrub the dirty areas to remove dirt and debris.
  • Avoid using water directly on the grip tape, as it can weaken the adhesive and damage the wood.
• Hardware Check:
  • Periodically check all nuts and bolts (trucks, wheels) to ensure they are tight. Loose hardware can affect performance and safety.
  • Do not overtighten, as this can strip threads or damage components.

Troubleshooting

Here are solutions to common issues you might encounter:

• Grip Tape Peeling: If edges of the grip tape start to peel, use a strong adhesive (like super glue) to re-secure the loose sections. Apply a small amount under the peeling edge and press firmly.
• Deck Warping: Warping is often caused by moisture or improper storage. If minor, storing the deck flat in a dry environment might help. Severe warping may require deck replacement.
• Cracks or Delamination: Small surface cracks are common with use. However, if you notice deep cracks or plies separating (delamination), the structural integrity of the deck may be compromised, and it should be replaced to prevent injury.

Specifications

Warranty and Support

For specific warranty information or product support, please refer to the official Almost Skateboards website or contact their customer service directly. This manual does not provide warranty details.