Yaheetech MM-00104173
Yaheetech 3ft Single Metal Bed Frame Instruction Manual
Model: MM-00104173 | Brand: Yaheetech
Introduction
Thank you for choosing the Yaheetech 3ft Single Metal Bed Frame. This manual provides detailed instructions for the safe and efficient assembly, operation, and maintenance of your new bed frame. Please read all instructions carefully before beginning assembly and keep this manual for future reference.
This robust bed base is fully constructed of a metal frame, offering strong support and a high load-bearing capacity. Its classic design with curved lines and thick tube frames brings a romantic and warm feeling to any space, blending seamlessly with various home decors.
Safety Information
Please observe the following important safety guidelines during assembly and use:
- Installation: We recommend 2 or more people for installation.
- Assembly Time: The estimated assembly time is approximately 0.5 hours.
- Child Safety: This product is not intended for use by children.
- Heat Sources: Keep away from fire or other heat sources.
- Protective Gear: We recommend wearing protective gloves during assembly.
- Surface Protection: Please follow the instruction manuals and use a pad to avoid damage during assembly.


Setup and Assembly
Your Yaheetech bed frame is designed for quick and straightforward assembly. All necessary hardware and tools are provided, along with an illustrated installation manual.
Before You Begin:
- Clear an adequate space for assembly.
- Lay out all components and hardware. Verify all parts are present against the parts list in your included manual.
- Place a soft cloth or carpet on the floor to protect parts from scratches during assembly.
- Ensure you have at least two people for assembly, as recommended.
Assembly Steps:
- Follow the step-by-step instructions provided in the illustrated installation manual included in your package.
- Attach the headboard and footboard sections to the side rails using the provided bolts and tools.
- Install the metal slats across the frame. Ensure they are securely fastened to provide optimal mattress support.
- Tighten all bolts firmly once the frame is fully assembled to ensure stability and prevent squeaking.


Operating Instructions
Once assembled, your Yaheetech bed frame is ready for use. Simply place your mattress directly onto the metal slats. No box spring is needed.
Under-Bed Storage:
The bed frame features 32cm of clearance underneath, providing ample space for storage. Utilize this area for bins, boxes, or other items to keep your bedroom tidy and organized.


Maintenance
To ensure the longevity and appearance of your Yaheetech metal bed frame, follow these simple maintenance tips:
- Cleaning: Wipe the metal frame with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as they may damage the powder-coated finish.
- Regular Checks: Periodically check all bolts and connections to ensure they remain tight. Re-tighten if necessary to maintain stability and prevent any potential squeaking.
- Protection: The powder-coated surface offers medium oxidation and scratch resistance. However, avoid sharp objects that could scratch the finish.

Troubleshooting
If you encounter any issues with your bed frame, please refer to the following common troubleshooting steps:
Squeaking Noises:
- Check Connections: The most common cause of squeaking is loose bolts. Re-tighten all bolts on the frame, especially where the side rails connect to the headboard and footboard, and where the slats attach to the frame.
- Lubrication: If squeaking persists, apply a small amount of lubricant (e.g., silicone spray or paraffin wax) to the joints where metal parts meet.
Mattress Sliding:
- Ensure the mattress is properly centered on the frame.
- The frame is designed with features to prevent mattress sliding. Verify that all components are correctly installed as per the assembly instructions.

Specifications
| Feature | Detail |
|---|---|
| Brand | Yaheetech |
| Model Number | MM-00104173 |
| Colour | Black |
| Overall Dimensions (L x W x H) | 195 cm x 96 cm x 82.5 cm |
| Applicable Mattress Size | 3' Single (190 cm L x 90 cm W) |
| Ground Clearance | 32 cm |
| Maximum Weight Capacity | 136 kg |
| Material | Iron |
| Finish Type | Powder Coated |
| Special Features | No Box Spring Needed, Squeak Resistant |
| Item Weight | 12.4 kg |

Warranty and Support
For information regarding warranty coverage and customer support, please refer to the documentation included with your purchase or visit the official Yaheetech website. You can also reach out to their customer service for assistance with any product-related inquiries.
Yaheetech Store: Visit the Yaheetech Store on Amazon
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.