1. Introduction
This manual provides detailed instructions for the installation, operation, and maintenance of your isinlive HEPA Replacement Filter. Designed to maintain optimal air quality, this filter is a crucial component for your compatible Dyson air purifier.
Image: Dyson air purifier with isinlive replacement filter, illustrating clean air flow.
2. Compatibility
The isinlive TP01 HEPA Replacement Filter is specifically designed for compatibility with the following Dyson Tower Purifier Pure Cool Link models:
- Dyson Pure Cool Link TP01
- Dyson Pure Cool Link TP02
- Dyson Pure Cool Link TP03
- Dyson Pure Cool Link AM11
- Dyson Pure Cool Link BP01
It replaces Dyson part number 968126-03, and part numbers: 305158-01, 305159-01, 308400-01, 308401-01.
Important: This filter is NOT compatible with Dyson models TP4B, TP07, YP7A, HP02, HP01, HP03, DP01, DP02, DP03, TP09, or TP10 air purifiers.
Please confirm your machine's model number before ordering. The model number can typically be found on the product label or the rear of your air purifier.
Image: Guide on locating the model number on your Dyson air purifier.
Image: Visual representation of compatible and incompatible Dyson air purifier models.
3. Product Features and Filtration Technology
The isinlive replacement filter utilizes a 3-stage filtration system to effectively purify your indoor air:
- Pre-Filter: Captures larger airborne particles such as hair, lint, pet dander, fibers, and dust.
- True HEPA Filter: Attaches to 99.97% of airborne particles as small as 0.3 microns, including pollen, fine dust, and pet dander.
- Activated Carbon Filter: Efficiently absorbs odors and fumes, such as pet odors, smoke, cooking smells, and Volatile Organic Compounds (VOCs).
Image: Visual breakdown of the 3-stage filtration system.
Image: Enhanced activated carbon layer for superior odor removal.
Image: Infographic detailing the size of particles captured by the filter.
4. Installation Instructions
Follow these steps to correctly replace the filter in your Dyson air purifier:
- Press the release buttons on the side of your Dyson air purifier to detach the top part of the unit.
- Carefully lift off the top part, exposing the old filter and its housing.
- Remove the old filter and its housing from the base.
- Separate the old filter from its housing.
- Place the new isinlive filter into the filter housing. Ensure it fits securely.
- Install the filter and housing assembly back into the air purifier's groover.
- Reattach the top part of the air purifier until it clicks into place.
Image: Visual guide for correct filter installation.
Installation Video Guides:
How to replace our tp01 replacement filter?
Video: A step-by-step demonstration of replacing the TP01 filter in a Dyson air purifier.
TP02 replacement filter for Dyson TP02 air purifier
Video: A visual guide on replacing the filter specifically for Dyson TP02 air purifiers.
TP01 Filter Compatible with Dyson TP01 TP02 BP01 Machine
Video: Instructions for filter replacement compatible with Dyson TP01, TP02, and BP01 machines.
5. Filter Reset Instructions
After replacing the filter, you may need to reset the filter indicator on your Dyson air purifier to clear the 'F' symbol on the screen:
- For Models TP01/TP02/TP03/AM11: Press and hold the Standby on/off button on the remote control for 6 seconds to reset the filter indicator.
- For Model BP01: Press and hold the power button on the remote control for 5 seconds. The screen will count down from 5, and once confirmed, your purifying fan is ready to use again.
Image: Instructions for resetting the filter indicator on various Dyson models.
6. Maintenance
To ensure optimal performance of your air purifier, it is recommended to replace the isinlive HEPA filter every 6-12 months. The actual replacement frequency may vary depending on usage, air quality, and environmental factors.
Image: Visual comparison of a new filter and a filter after 6-12 months of use, highlighting the importance of timely replacement.
7. Specifications
| Specification | Detail |
|---|---|
| Brand | isinlive |
| Compatible Models | Dyson Tower Purifier Pure Cool Link TP01, TP02, TP03, AM11, BP01 |
| Replaces Part Numbers | 968126-03, 305158-01, 305159-01, 308400-01, 308401-01 |
| Product Dimensions | 7.4"L x 7.4"W x 7.3"Th |
| Filtration Type | True HEPA Filter, Activated Carbon Filter |
| Filtration Efficiency | 99.97% of airborne particles down to 0.3 microns |
| Recommended Replacement | Every 6-12 months (depending on use) |
8. Troubleshooting
If you encounter any issues with the filter fitting your air purifier or its performance, please ensure you have followed all installation steps correctly and that your model is listed as compatible. If problems persist, please contact customer service for assistance.
9. Customer Service
We value customer service and satisfaction. If you have any problems with the filter or require further assistance, please contact us directly. Our team is ready to help you ensure the best performance from your isinlive replacement filter.