AULCMEET EN2BS27H
AULCMEET EN2BS27H Remote Control User Manual
Model: EN2BS27H
Introduction
This manual provides detailed instructions for the AULCMEET EN2BS27H Replacement Remote Control, designed for various Hisense Smart TV models. Please read this manual carefully before using the remote control to ensure proper operation and longevity.
The EN2BS27H remote control is compatible with Hisense Smart TV models including 58S5, 65R6, 65S8, 75R6, 75S8, 70B7100UW, 55B7100UW, 43B7100UW, 50B7100UW, 65B7100UW, Q8600, 65Q8600UWG, B8000, 65B8000UW, LEDN70B7100UW, LEDN55B8000UW, and B7100 series.
Product Overview

Figure 1: Front view of the AULCMEET EN2BS27H remote control. This image displays the full layout of the remote, including the power button, input selection, numerical keys, navigation pad, volume and channel controls, and dedicated buttons for streaming services like Netflix and Prime Video.

Figure 2: The AULCMEET EN2BS27H remote control in use. This image shows the remote being held by a user, demonstrating its ergonomic design and typical usage scenario while viewing a Hisense Smart TV.
Setup and Installation
The AULCMEET EN2BS27H remote control is designed for ease of use with no programming required for compatible Hisense Smart TVs. Follow these steps to begin using your new remote:
- Battery Installation: Locate the battery compartment on the back of the remote control.
- Open the battery compartment cover.
- Insert two (2) AAA 1.5V Alkaline batteries, ensuring the positive (+) and negative (-) terminals align correctly with the markings inside the compartment.
- Close the battery compartment cover securely.
- First Use: Point the remote control towards your Hisense Smart TV. The remote should function immediately without any additional setup.
Note: Ensure your TV is powered on before attempting to use the remote control.
Operating Instructions
This section details the primary functions of the buttons on your EN2BS27H remote control.
- Power Button (⏻): Turns the TV on or off.
- INPUT: Cycles through available input sources (HDMI, AV, etc.).
- Number Buttons (0-9): Directly select channels or input numerical values.
- T.shift: Activates or controls the Time Shift function (if supported by TV).
- Subtitle: Toggles subtitles on or off.
- Gear Icon (Settings): Accesses the TV's settings menu.
- EPG: Displays the Electronic Program Guide.
- Navigation Pad (Up, Down, Left, Right, OK): Navigates through menus and confirms selections.
- BACK: Returns to the previous screen or menu.
- EXIT: Exits the current menu or application.
- Home Icon: Returns to the TV's main home screen.
- Live TV: Switches to live television broadcast.
- VOL +/-: Adjusts the volume level.
- CH +/-: Changes the channel up or down.
- Mute: Mutes or unmutes the TV audio.
- Playback Controls (Play, Pause, Stop, Rewind, Fast Forward): Controls media playback.
- Info: Displays information about the current program or content.
- CH.List: Opens the channel list.
- Netflix Button: Direct access to the Netflix application.
- Prime Video Button: Direct access to the Prime Video application.
- YouTube Button: Direct access to the YouTube application.
Maintenance and Care
To ensure the longevity and optimal performance of your remote control, follow these maintenance guidelines:
- Cleaning: Use a soft, dry cloth to wipe the surface of the remote control. For stubborn dirt, slightly dampen the cloth with water or a mild, non-abrasive cleaner. Avoid using harsh chemicals or abrasive materials.
- Battery Replacement: Replace batteries when the remote's responsiveness decreases or it stops functioning. Always replace both batteries at the same time with new ones of the same type (AAA 1.5V Alkaline).
- Storage: If the remote control will not be used for an extended period, remove the batteries to prevent leakage and potential damage to the remote. Store in a cool, dry place.
- Avoid Damage: Do not drop the remote control, expose it to extreme temperatures, direct sunlight, or moisture. Keep it away from liquids.
Troubleshooting
If you experience issues with your AULCMEET EN2BS27H remote control, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Remote control not working. | Dead or incorrectly inserted batteries. | Replace batteries with new AAA 1.5V Alkaline batteries, ensuring correct polarity (+/-). |
| Remote control range is poor. | Weak batteries; Obstruction between remote and TV; Infrared sensor on TV is blocked. | Replace batteries. Ensure there are no objects blocking the line of sight between the remote and the TV's infrared sensor. Clean the TV's IR sensor if dusty. |
| Certain buttons do not respond. | Button malfunction; TV model incompatibility for specific functions. | Check if the button is physically stuck. Verify that your TV model supports the specific function (e.g., Time Shift). If the issue persists for multiple buttons, consider replacing the remote. |
| TV does not respond to any remote commands. | TV is off or unplugged; TV's IR sensor is faulty. | Ensure the TV is powered on and plugged in. Try using the TV's physical buttons. If the TV still doesn't respond, there might be an issue with the TV itself. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | EN2BS27H |
| Brand | AULCMEET |
| Compatible Devices | Hisense Smart Televisions (Specific models listed in Introduction) |
| Connectivity Technology | Infrared (IR) |
| Power Source | 2 x AAA 1.5V Alkaline Batteries (not included) |
| Product Dimensions | 7.6 x 2 x 0.7 inches (approx.) |
| Item Weight | 3 ounces (approx.) |
| Special Feature | Ergonomic design |
| Max Number of Supported Devices | 1 (Direct replacement remote) |
Warranty and Support
For information regarding warranty coverage or technical support, please refer to the documentation provided with your purchase or contact the seller directly. As a replacement remote, specific warranty terms may vary.
For further assistance, you may contact the manufacturer, AULCMEET, or the retailer from whom you purchased this product.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.