KONKIN BOO Replacement AC Adapter Charger User Manual

1. Introduction

This manual provides essential instructions for the safe and efficient use of your KONKIN BOO Replacement AC Adapter Charger. This adapter is specifically designed for use with Osim OS-1160-1uZap and OS-1170 uZap King Body Belt Massagers, ensuring reliable power delivery.

The adapter features an advanced design for high portability and efficient power exchange, contributing to stable operation and controlled working temperatures.

2. Safety Information

Your KONKIN BOO AC Adapter Charger is designed with multiple safety protections to ensure secure operation. Please observe the following safety guidelines:

• Over Voltage Protection: Prevents damage from excessive voltage input.
• Over Heat Protection: Automatically shuts down if internal temperature exceeds safe limits.
• Short Circuit Protection: Guards against electrical shorts.
• Over Current Protection: Protects against excessive current flow.

This product is certified with FCC and CE standards, indicating compliance with safety and quality regulations.

Image: Built-in safety protections of the AC adapter.

General Safety Precautions:

• Do not expose the adapter to water, moisture, or extreme temperatures.
• Use the adapter in a well-ventilated area to prevent overheating.
• Avoid dropping or subjecting the adapter to strong impacts.
• Do not attempt to open or repair the adapter yourself. Refer to qualified personnel.
• Ensure the adapter is compatible with your device model before use.

3. Setup

Follow these steps to properly set up your KONKIN BOO Replacement AC Adapter Charger:

1. Ensure your Osim OS-1160-1uZap or OS-1170 uZap King Body Belt Massager is turned off.
2. Connect the adapter's output plug (the smaller connector) securely into the power input port of your Osim massager.
3. Plug the adapter's AC input plug (the larger plug) into a standard, functional wall power outlet.
4. Verify all connections are firm before powering on your massager.

Important: Please check your massager's model number to ensure it matches the compatible models (OS-1160-1uZap, OS-1170) before purchasing and using this adapter.

4. Operating Instructions

Once the adapter is correctly connected to both the power outlet and your Osim massager, it will begin supplying power. The adapter is designed for stable and efficient power delivery.

For specific operating instructions regarding your Osim OS-1160-1uZap or OS-1170 uZap King Body Belt Massager, please refer to the instruction manual provided with your massager device.

5. Maintenance

Proper maintenance helps prolong the life of your AC adapter:

• Cleaning: Disconnect the adapter from all power sources before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or solvents.
• Storage: When not in use for extended periods, disconnect the adapter from the wall outlet and the device. Store it in a cool, dry place, away from direct sunlight and moisture.
• Cable Care: Avoid bending or crimping the power cord excessively. Do not place heavy objects on the cord.

6. Troubleshooting

If you encounter issues with your AC adapter, refer to the following common problems and solutions:

• Device Not Powering On:
  • Ensure the adapter is securely plugged into both the wall outlet and the massager's power input.
  • Verify that the wall outlet is functional by testing it with another device.
  • Confirm that your massager itself is in working order and its power switch is on.
• Adapter Feels Warm:
  • It is normal for the adapter to feel slightly warm during operation. If it becomes excessively hot, disconnect it immediately and ensure it is used in a well-ventilated area.

If issues persist after attempting these steps, please contact customer support.

7. Specifications

Image: Internal construction highlighting safe and reliable components.

8. Warranty and Support

For product support, technical assistance, or inquiries regarding warranty information, please contact KONKIN BOO customer service through the retailer where your product was purchased. Please have your purchase details and product model information available when contacting support.