Lydsto R1 Robot Vacuum Cleaner User Manual

1. Setup and Initial Use

Before operating your Lydsto R1 Robot Vacuum Cleaner, please follow these setup instructions carefully.

1.1 Unpacking and Placement

Carefully remove all components from the packaging. Place the self-empty base in a suitable location, ensuring it is:

• At least 5 cm (2 inches) away from any wall.
• With at least 1.2 meters (4 feet) of clear space directly in front of it.
• With at least 0.5 meters (1.6 feet) of clear space on both sides.

This ensures optimal navigation and return-to-base functionality.

Image: The Lydsto R1 Robot Vacuum Cleaner, its self-empty base, and included accessories like dust bags and mop pads.

1.2 Initial Charging

Connect the self-empty base to a power outlet. Place the Lydsto R1 robot onto the charging contacts of the base. Ensure the robot is properly aligned. Allow the robot to fully charge before its first use. A full charge typically takes several hours.

1.3 App Connection

For enhanced control and smart features, download the MiHome app on your smartphone. Follow the in-app instructions to connect your Lydsto R1 robot. This will allow you to control the robot remotely, set cleaning schedules, and view cleaning maps.

2. Operating Instructions

The Lydsto R1 offers both manual and app-controlled operation for convenient cleaning.

2.1 Powering On/Off and Starting Cleaning

• To power on the robot, press and hold the power button on the robot for 3 seconds.
• To start a cleaning cycle, briefly press the power button once the robot is powered on.
• To pause cleaning, briefly press the power button during operation.
• To send the robot back to its charging base, press the home button on the robot or use the app.

2.2 Smart Navigation and Cleaning

The Lydsto R1 utilizes LDS Lidar Navigation and SLAM Intelligent Algorithm for efficient path planning and comprehensive cleaning. It is equipped with an LDS2.0 high-precision radar laser sensor to avoid obstacles and prevent falls.

The robot features a powerful 2700Pa suction for effective dust and debris collection, including pet hair. It also includes a carpet recognition function, automatically adjusting suction power when transitioning to carpeted surfaces.

Image: A visual representation of the Lydsto R1's 2700Pa super strong suction power, effectively picking up dust and debris.

2.3 Mopping Function

The Lydsto R1 includes a mopping module with a 250ml electric control water tank. To use the mopping function:

1. Disassemble the mopping accessory from the robot.
2. Soak the mop bracket and wring it out.
3. Embed and stick the mop pad back onto the bracket.
4. Open the lid of the water tank, fill it with water, and close the lid securely.
5. Assemble the mopping accessory to the rear of the robot.

The app allows you to select from three water output options (small, medium, large) to suit different floor types and cleaning needs. Remember to remove the mopping accessory while the robot is charging or idle to prevent damage to the floor or the robot.

Image: A close-up view of the Lydsto R1's 250ml electric control water tank, highlighting its three water output options for varied mopping areas.

3. Maintenance

Regular maintenance ensures the longevity and optimal performance of your Lydsto R1 robot vacuum cleaner.

3.1 Dust Container and Filter Cleaning

The dust container and filter should be cleaned regularly to maintain suction efficiency.

1. Open the dust container.
2. Take out the filter and clean its surface with the provided brush.
3. Wash the dust container with water.
4. Allow the dust container and filter to dry completely before reassembling them back into the robot.

3.2 Mop Pad Cleaning

After each mopping session, remove the mop pad from the mopping accessory and wash it thoroughly. Allow it to air dry completely before reattaching or storing.

3.3 Self-Empty Base Garbage Bag Replacement

The self-empty base will indicate when the garbage bag needs replacement, typically when its indicator shows orange.

1. Open the lid of the self-empty base.
2. Carefully take out the full garbage bag.
3. Replace it with a new, empty garbage bag.
4. Close the lid securely.

4. Troubleshooting

If you encounter issues with your Lydsto R1, refer to the following common solutions. For more complex problems, consult the MiHome app for specific error codes or contact customer support.

• Robot not charging: Ensure the charging base is plugged in and the robot is properly aligned on the charging contacts. Check for any obstructions preventing proper contact.
• Robot stuck or not moving: Clear any obstacles around the robot. Check if the wheels or brushes are tangled with hair or debris.
• Poor cleaning performance: Clean the dust container and filter. Check if the main brush and side brushes are clean and free of tangles. Ensure the water tank is filled for mopping.
• App connectivity issues: Ensure your Wi-Fi network is stable and the robot is within range. Restart the robot and your router if necessary.
• Unusual noises: Check for any foreign objects caught in the brushes or wheels. Clean the dustbin and filter.

5. Specifications

6. Warranty and Support

For information regarding product warranty, please refer to the warranty card included with your purchase or visit the official Lydsto website. For technical support, troubleshooting assistance, or spare parts, please contact Lydsto customer service through the contact information provided in your product documentation or on the official Lydsto website.