Product Overview
The MAXvolador Solar Address Sign is designed to illuminate your house numbers, ensuring visibility for visitors, emergency services, and delivery personnel, especially during nighttime hours. This solar-powered device features multiple lighting modes, automatic operation, and a weather-resistant design for year-round outdoor use.
Figure 1: MAXvolador Solar Address Sign, showcasing its illuminated display and solar panel.
Key Features
- 3-Color Lighting Modes: Offers 6500K cool white, 2700K warm white, and 4000K natural white. Easily switch between modes using a button behind the solar panel.
- High-Efficiency Solar Panel & Large Capacity Battery: Equipped with a large solar panel and 16 energy-saving LED lights. No external power required. The solar panel angle can be rotated for maximum sun exposure.
- Automatic ON/OFF: Built-in sensitive dusk-to-dawn sensors automatically turn the light on at dusk and off at dawn. Provides illumination for up to 18 hours on a full charge.
- Weather Resistant: IP65 waterproof design with durable ABS & PS material ensures year-round outdoor use, withstanding rain, wind, snow, and other extreme weather conditions.
- Easy Installation: Comes with 4 sets of 0-9 numbers, 1 set of A-Z letters, and 2 fixed cardboards for DIY address customization. Connectable stakes allow for adjustable height.
Figure 2: Illustration of the three selectable lighting modes: Cool White, Warm White, and Natural White.
Figure 3: The sign's weather-resistant features, including IP65 waterproofing and protection against heat, cold, and wind.
Package Contents
- 1 x Solar Address Sign Unit
- 4 x Sets of Numbers (0-9)
- 1 x Set of Letters (A-Z)
- 2 x Fixed Cardboards (for number alignment)
- Connectable Stakes (for ground installation)
Setup and Installation
Follow these steps to set up your MAXvolador Solar Address Sign:
- Apply Numbers: Use the provided fixed cardboards as a template to accurately place the self-adhesive numbers and letters onto the address plaque. Ensure they are straight and firmly pressed.
- Assemble Stakes: Connect the pole sections of the stake together.
- Attach Plaque to Pole: Securely connect the address plaque unit to the top of the assembled pole.
- Insert into Ground: Choose a location that receives ample direct sunlight throughout the day. Insert the spike end of the pole into the ground. If the ground is too hard, pre-dig a small hole with a tool to avoid damaging the stake.
- Adjust Solar Panel: Rotate the angle of the solar panel to face the sun for optimal charging.
- Activate: Locate the ON/OFF switch behind the solar panel and ensure it is in the "ON" position before the first charge.
Figure 4: Step-by-step installation guide for the solar address sign.
Operation
The MAXvolador Solar Address Sign is designed for simple, automatic operation:
- Automatic Illumination: Once the switch is set to "ON", the built-in light sensor will detect ambient light levels. The sign will automatically turn on at dusk and turn off at dawn.
- Charging: During daylight hours, the solar panel will absorb sunlight and convert it into electrical energy, charging the internal battery. For best performance, ensure the solar panel receives 6-8 hours of direct sunlight daily. Note that charging efficiency may be affected by weather conditions and sunlight intensity.
- Changing Light Color: To switch between the three available light colors (cool white, warm white, natural white), press the button located behind the solar panel. Each press will cycle through the colors and then turn the light off.
Figure 5: Automatic charging during the day and illumination at night.
Figure 6: Key operational features and components of the solar address sign.
Maintenance
To ensure the longevity and optimal performance of your solar address sign, consider the following maintenance tips:
- Cleaning: Periodically wipe the solar panel and the illuminated plaque with a soft, damp cloth to remove dust, dirt, or debris that may accumulate and hinder charging efficiency or visibility.
- Snow Removal: In snowy conditions, gently clear any snow from the solar panel to allow it to charge effectively.
- Placement Check: Occasionally check that the sign remains firmly planted in the ground and that the solar panel is still angled towards the sun for maximum exposure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Sign does not light up at night. |
|
|
| Light duration is short. |
|
|
| Numbers/letters peeling off. |
|
|
Specifications
| Brand | MAXvolador |
| Model Number | SLW02018 |
| Item Weight | 1.5 pounds |
| Product Dimensions | 1 x 1 x 0.4 inches (Plaque dimensions: 9.8"L x 7.2"W, Total height with stake: 32.3") |
| Color | Black |
| Material Type | Plastic (ABS & PS) |
| Light Type | LED |
| Waterproof Rating | IP65 |
| First Available Date | July 29, 2021 |
Official Product Videos
No official product videos from the seller were available in the provided data.
Warranty and Support
Specific warranty details and direct support contact information are not available in the provided product data. Please refer to the product packaging or the manufacturer's official website for the most up-to-date warranty and customer support information.