Product Overview
The STARLEAD LED Bathroom Mirror is designed to enhance your bathroom experience with its advanced features and elegant design. This mirror offers adjustable lighting, anti-fog functionality, integrated Bluetooth speakers, and a durable tempered glass construction.
Figure 1: STARLEAD LED Bathroom Mirror (100x70cm)
Key Features:
- Adjustable Color Temperature & Dimmable: Choose from 3000K (warm), 4000K (natural), and 6500K (cold white) light. Brightness is continuously dimmable from 5% to 100%.
- Bluetooth Connectivity: Integrated dual Bluetooth speakers allow you to stream audio from your devices.
- Anti-Fog Function: Quickly clears condensation for a clear reflection.
- Memory Function: Remembers your last lighting settings after power off.
- Durable Construction: Made with HD tempered glass, 5 times stronger than ordinary glass, shatter-resistant and safe.
- Flexible Installation: Supports both horizontal and vertical mounting.
- Wall Switch Compatibility: Can be hardwired for control via a wall switch.
Safety Information
- Always disconnect power before installation or maintenance.
- Installation should be performed by a qualified electrician if hardwiring to a wall switch.
- Do not use abrasive cleaners on the mirror surface.
- Ensure the mirror is securely mounted to the wall to prevent falling.
- The mirror is IP44 rated for bathroom use, but avoid direct water spray on electrical components.
Package Contents
Verify that all components are present before beginning installation:
- STARLEAD LED Bathroom Mirror
- Installation Kit (screws, wall anchors)
- Instruction Manual
Figure 2: Product Packaging Components
Setup and Installation
This mirror can be installed horizontally or vertically. Professional installation is recommended for hardwired connections.
Tools Required (Not Included):
- Drill
- Measuring Tape
- Pencil
- Level
Installation Steps:
- Measure and Mark: Measure the distance between the two hooks on the back of the mirror. Mark the corresponding drilling points on the wall using a pencil and level.
Figure 3: Measuring and Marking for Installation
- Drill Holes: Drill holes at the marked points. Insert wall anchors if necessary.
- Install Screws: Insert screws into the drilled holes, leaving a small portion exposed for hanging.
- Wire Connection (Optional Hardwire): If connecting to a wall switch, ensure power is off. Connect the mirror's wiring to the wall's electrical wiring inside an IP44 waterproof junction box. This step should be performed by a professional electrician.
Figure 4: Wall Switch and Junction Box Connection
Figure 5: Wall Switch Connection Diagram
- Hang the Mirror: Carefully lift the mirror and align the hooks on the back with the installed screws. Gently lower the mirror until it is securely seated.
Mounting Orientation:
The mirror supports both horizontal and vertical mounting to suit your space.
Figure 6: Horizontal and Vertical Mounting
Figure 7: Flexible Installation Orientation
Operating Instructions
The mirror features touch-sensitive controls for various functions.
Power On/Off and Lighting Control:
- Short Press: Briefly touch the light button to cycle through 3 color temperatures: 3000K (Warm), 4000K (Natural), and 6500K (Cold White).
- Long Press: Press and hold the light button for 3 seconds to continuously adjust the brightness from 5% to 100%.
- Memory Function: The mirror will remember your last brightness and color temperature setting when powered off and on again.
Figure 8: Light Control Interface
Figure 9: Dimmable Brightness Range
Figure 10: Color Temperature Options
Figure 11: Memory Function
Anti-Fog Function:
- Touch the anti-fog button to activate the defogging function.
- It is recommended to activate the anti-fog function 5 minutes before showering for optimal results.
Figure 12: Anti-Fog Activation
Figure 13: Defogging Performance
Bluetooth Connectivity:
- Activate Bluetooth on your mobile device.
- Search for "STARLEAD Mirror" (or similar name) in your device's Bluetooth settings.
- Pair your device with the mirror. Once connected, you can stream audio through the integrated speakers.
Figure 14: Bluetooth Audio Streaming
Figure 15: Bluetooth Speaker Functionality
Maintenance and Care
- Cleaning: Use a soft, damp cloth with a mild glass cleaner to clean the mirror surface. Avoid abrasive cleaners or harsh chemicals that may damage the glass or frame.
- Dusting: Regularly dust the mirror and frame with a dry, soft cloth.
- Electrical Components: Ensure all electrical connections are dry and free from moisture. Do not spray water directly onto the mirror's electrical components.
- Anti-Scratch Film: Remove the anti-scratch film from the mirror surface after installation.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Mirror lights do not turn on. | No power supply; loose connection; faulty wall switch. | Check power outlet/circuit breaker. Ensure all wires are securely connected. Test wall switch if applicable. Consult a professional electrician. |
| Anti-fog function not working. | Anti-fog function not activated; electrical issue. | Ensure the anti-fog button is pressed. Check power supply to the mirror. |
| Bluetooth not connecting. | Bluetooth not enabled on device; mirror not in pairing mode; interference. | Ensure Bluetooth is enabled on your device. Try restarting both the mirror (by cycling power) and your device. Move closer to the mirror. |
| Light brightness or color temperature cannot be adjusted. | Incorrect button press; internal malfunction. | Ensure you are using a short press for color temperature and a long press for brightness. If problem persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Model Number | SLD017M10070 |
| Dimensions (L x W x H) | 100 x 70 x 0.1 cm (39.4 x 27.6 x 0.04 inches) |
| Weight | 7 kg (15.4 lbs) |
| Material | HD Tempered Glass |
| Light Color Temperatures | 3000K (Warm), 4000K (Natural), 6500K (Cold White) |
| Dimmable Range | 5% - 100% |
| Special Features | Bluetooth Speakers, Anti-Fog, Memory Function, Wall Switch Compatible |
| Mounting Type | Wall Mount (Horizontal/Vertical) |
| IP Rating | IP44 |
Warranty and Support
STARLEAD is committed to providing high-quality products and excellent customer service.
Warranty Information:
This product comes with a 24-month warranty from the date of purchase, covering manufacturing defects. Please retain your proof of purchase for warranty claims.
Return Policy:
You may be eligible for a refund or replacement within 30 days of receipt, as per Amazon's return policy.
Customer Support:
For any questions, technical assistance, or warranty claims, please contact STARLEAD customer support:
- Email Assistant: Available 24/7 for inquiries.
- Online Support: Visit the STARLEAD Brand Store on Amazon or the product page to "Ask a question" to the seller.
Figure 16: STARLEAD Support Information
