1. Setup
The MAXvolador Solar Powered Address Sign offers versatile installation options and customizable numbering. Follow these steps for proper setup:
1.1 Unpacking and Components
Carefully remove all components from the packaging. You should find the main address plaque unit, ground stakes, connectors, mounting screws/anchors, number/letter stickers, and spacing templates.
Image: Overview of the MAXvolador Solar Powered Address Sign components, including the main unit, ground stakes, and DIY stickers, with key dimensions indicated.
1.2 Applying Address Numbers/Letters
- Select the appropriate number/letter stickers for your address. The kit includes multiple sets of numbers (0-9) and letters (A-Z).
- Use the provided spacing templates (for 3, 4, or 5 digits/characters) to ensure even and centered placement of your address on the plaque's display area.
- Carefully peel and apply the chosen stickers onto the plaque.
1.3 Choosing Installation Method
The address sign supports two primary installation methods:
- Ground Mount: Assemble the plastic pole sections and attach the ground spike. Insert the assembled pole into the designated slots at the bottom of the address plaque. For easier installation and to prevent damage, it is recommended to dig a pilot hole in the ground before inserting the stake.
- Wall Mount: Use the provided screws and anchors to securely attach the address plaque to a wall. The back of the unit features mounting holes for this purpose.
Image: Various outdoor installations of the MAXvolador Solar Powered Address Sign, showcasing both ground-mounted and wall-mounted options in different environments.
1.4 Initial Charging
Before first use, ensure the sign is placed in a location that receives direct sunlight for 5-6 hours to fully charge the internal battery. The sign must be in the "ON" status for charging to occur. The solar panel is located on the top of the unit.
2. Operating Instructions
The MAXvolador Solar Powered Address Sign is designed for automatic, energy-efficient operation.
2.1 Power and Lighting Mode Selection
Locate the ON/OFF/Color Mode switch on the back of the unit, underneath the solar panel. This switch allows you to power the device and select your preferred lighting color:
- Mode 1: Warm White (2700K) - Default ON setting.
- Mode 2: Cool White (6500K)
- Mode 3: Daylight White (4000K)
- OFF: Turns the unit off.
Simply shift the switch to the left to cycle through the modes and select your desired lighting color. Ensure the switch is in an "ON" position for the sign to function and charge.
Image: The MAXvolador Solar Powered Address Sign showcasing its three distinct lighting modes: Warm White (2700K), Cool White (6500K), and Bright White (4000K), with instructions to shift the switch to select.
2.2 Automatic Dusk-to-Dawn Operation
The sign features built-in sensitive dusk-to-dawn sensors. Once fully charged and set to an "ON" mode, the LED address plaque will automatically illuminate at dusk and turn off at dawn. A full charge (5-6 hours of direct sunlight) can provide up to 20 hours of continuous lighting at night.
Image: A visual representation of the MAXvolador Solar Powered Address Sign's automatic functionality, showing it charging in sunlight during the day and illuminating house numbers at night.
3. Maintenance
The MAXvolador Solar Powered Address Sign is designed for durability and minimal maintenance.
3.1 Weather Resistance
Constructed with IP65 waterproof design and durable ABS & PS material, the sign is built to withstand various outdoor weather conditions, including rain, snow, and extreme temperatures. No special weather-proofing is typically required.
Image: The MAXvolador Solar Powered Address Sign highlighting its weatherproof features, including IP65 waterproof rating, heat resistance, cold protection, and windproof design, shown in a rainy environment.
3.2 Cleaning
Periodically wipe the solar panel and display surface with a soft, damp cloth to remove dust, dirt, or debris that may obstruct sunlight absorption or visibility. Avoid using abrasive cleaners.
3.3 Switch Protection
The black plastic protective cover on the ON/OFF/Color Mode switch is waterproof. Do NOT attempt to remove or take it apart, as this may compromise the unit's water resistance.
4. Troubleshooting
If you encounter issues with your MAXvolador Solar Powered Address Sign, consider the following:
- Light not illuminating at night: Ensure the ON/OFF/Color Mode switch is in an "ON" position. If it is, try shifting the switch from "ON" to "OFF" and then back to "ON" again. Verify the solar panel receives adequate direct sunlight for 5-6 hours daily. Obstructions like dirt or shade can prevent proper charging.
- Short illumination time: This typically indicates insufficient charging. Relocate the sign to an area with more direct sunlight. Ensure the solar panel is clean and free from debris.
- Difficulty with ground stake installation: If the ground is hard, dig a pilot hole with a tool before inserting the stake to prevent damage to the stake.
5. Specifications
- Product Dimensions: 5.91 x 9.92 x 0.4 inches (5.91"L x 9.92"W)
- Item Weight: 1.57 pounds (0.71 Kilograms)
- Manufacturer: MAXvolador
- Item Model Number: HNX-DC05
- Material: Plastic (ABS & PS)
- Mounting Type: Wall Mount, Ground Mount
- Light Type: LED (22 energy-saving LED chips)
- Lighting Modes: Warm White (2700K), Cool White (6500K), Daylight White (4000K)
- Waterproof Rating: IP65
- Orientation: Landscape
- Pre-printed: Numbers (DIY stickers included for customization)
- Charging Time: 5-6 hours (direct sunlight)
- Illumination Time: Up to 20 hours (after full charge)
Image: A close-up view of the MAXvolador Solar Powered Address Sign with detailed dimensions, indicating its length and width for accurate placement and installation.
6. Warranty & Support
Your MAXvolador Solar Powered Address Sign is backed by the following:
- Transparency Verification: Each item includes a unique code verified before shipping to ensure authenticity.
- Return Policy: A 30-day refund or replacement policy is typically offered. Please refer to your purchase platform for specific return details.
- Customer Support: For any questions, issues, or support needs, please contact MAXvolador customer service through the retailer where the product was purchased.